• Eliminates System Noise Generated in The Vehicles Power System
• For 10 Amp Systems
• Works With Most Vehicle Power Systems
Best selling similar products
Manufacturer:
Model Number:
CSS-100
Weight:
0.39lbs
Internal SKU:
css100
Internal Product ID:
5270
perfect
This product works perfect for my cb radio it had a alt noise now it dont. Perfect.
12 found this helpful
Fixed the electronic noise problem in my Airplane
Airplane had a noise problem in my airplane,the intercom picked up electronic noise from my alternator and distorted the passanger so bad it was impossible to understand, it made taking instruction impossible. I installed this inline right after the alternator and problem solved
8 found this helpful
paccss-100 noise filter
I prefer this type of a noise filter and they work well.
8 found this helpful
This works
I installed this and it has noticeably reduces the alternator whine I was getting in my car stereo.
6 found this helpful
three wires?
It has three wires, which is probably a bonus feature, but there aren't any instructions included. OR ONLINE.
5 found this helpful
Works Great
Easy to install, alternator noise was driving me crazy! 10 min install and it is all gone. I tried all the tricks I even ran a new ground from radio to battery. This item is amazing, I will be installing one with every radio i put in from now on!
6 found this helpful
essential for CLEAN system
The sound of a car system begins at the head unit. If the power carries noise from sources such as the alternator and spark plugs, you will get a horrible experience even with the MOST expensive and highly reviewed products. This is prevented by these filters. I actually use two of these filters. One for the power input for the head unit and one for the clock constant power input to the head unit. These are robustly built units. they are not small but I found ways of hiding them within the dash. Very simple to understand the wiring connections. my system is not the most expensive system you can buy, but my vehicle makes you think you are in a sound stage. Always remember a few other tips. bring the ground of the head unit back to where you ground your amps. Seperate the power from any signal wires as they run back to the amps by at least 2 feet until they come to the amp. Make sure the antenna securely seats firmly into the head unit. ENJOY!
5 found this helpful
pac css-100
A great filter. I used it to clean up the power for the speedometer on my 1934 ford street rod.
6 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.