See all parts that fit your 1984 Thunderbird
Fuse Distribution Block: 1 4 Gauge Input, 2 8 Gauge Outputs
Product highlights
• One 2/4 Gauge Input
• 2 8 Gauge Outputs
• Holds 2 AGU Fuses
• Platinum Plated
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
270W Peak (90W RMS) 5.25" Club Series 2 Way Coaxial 3-ohm Speakers
$74.99
List price $129.95
Best selling similar products
• Premium Series Distribution Block
• MAXI Fuses
• 1/0 or 4 AWG Input
• 4 or 8 AWG Outputs
• Nickel Plated • Includes Grommets and Wrenches
(13)
$44.99
List price $44.99
HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish
(31)
$16.99
List price $39.00
• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(40)
$23.99
List price $49.00
• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$33.99
List price $69.00
• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(29)
$13.99
List price $29.00
• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base
$69.99
List price $69.99
• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$28.99
List price $49.00
• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(21)
$14.99
List price $29.00
• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
(3)
$56.99
List price $63.99
• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations
$49.00
List price $69.00
| 5 star |
|
71% |
| 4 star |
|
29% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Did its job
Great price. It does what it needs to do. I see no reason to pay more for a distribution block unless you are building a show car and need it to look really special.
23 found this helpful
good value
It's a good value product, however no where in the description it states the fuses are not included, or that you need them at all. Fuses only cost about $3 but still would had been nice.
21 found this helpful
great value
This item seemed to work good until my amp kept shutting off. I had replaced the fuses about 10 times then i replaced it with a heavier duty fuse block and found out why my amp kept turning off and blowing fuses.... it has two small screws that hold the fuse holder to the wire terminal and it was loose so it kept making a short. I just took a screw driver to it and tightened it back up. I gave it to my friend for his lancer evo it still works fine, so just check it when you get it.
20 found this helpful
does its job
i got this for my wife's car, going to upgrad her wiring from 8 gauge to 4 gauge. This thing is pretty heavy too.
20 found this helpful
Looks great!
Don’t be afraid of the extremely low price of this distribution block. It looks great and works just as good as those extremely expensive blocks. This unit is highly recommended if your are connecting 2 amps using a single 4 gage power feed.
21 found this helpful
Cheap and works
Cheap plated lead but so are most on the market. It works and no complaints.
19 found this helpful
Works good
It works well, seems like a nice solid block.. You do need 2 agu fuses for it though i didn't realize that until i got it. Works well a+
20 found this helpful
Good product
It does what its supposed to do what can i say. would recommend
18 found this helpful
Good Buy
Great price simple install does what it is supposed to do. Why spend more?
18 found this helpful
Great Product!! Great Price!
I bought this product to use for installing my amplifier, speaker box & subwoofer to my exsisting factory stereo. This is a great price & has worked perfectly for intalling my fused power wire to the amp.
16 found this helpful
Crossfire BMF400.4 + Amplifier Kit
400W RMS, 4-Channel Class A/B Car Amplifier + Kicker 09ZCK44 4 Gauge Amplifier Kit + Sound Dampening
(28)
$185.27
List price $579.89
Bass Control Module for Remote Ready EL and BA Series Amplifiers
(6)
$16.99
List price $24.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
