AudioControl + NVX Bass Bundle w/ Premium Amp Kit

General Features:

• The Epicenter Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 200 watts x 1 chan.
• 2 ohm: 350 watts x 1 chan.
• 1 ohm: 600 watts x 1 chan.
• LED power (green) and protect (red) indicators
• Soft start turn-on
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Gold plated speaker and RCA terminals
• THE EPICENTER® Digital Bass Restoration Built-in
• MILC™ Maximum Input Level Control
• Maximum Input Level Control prevents clipping and damaging distortion
• 24 dB/octave Linkwitz-Riley Alignment Crossover
• GTO Signal Sense
• PFM Subsonic Filter
• Line-Level RCA Inputs and Active Speaker-Level Inputs
• Expansion Bus
• Allows two or more amps to be controlled by one set of controls
• Solid One-Piece Aluminum Chassis
• ACR-3 Remote Control for Subwoofer Level and THE EPICENTER® effect
• Input sensitivity: 200mV - 6V
• Frequency Response: 16 - 250 Hz
• Total Harmonic Distortion (THD): <0.1%
• Signal to Noise Ration: 104 dBa, Ref 600 W at 1 Ohm
• Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz
• Variable low-pass filter: 30 - 250 Hz, 24 dB/octave Linkwitz-Riley
• Subsonic filter: Selectable 16 or 32 Hz , 18dB/Octave
• Phase Selector: 0 - 180°
• Fuse Rating: 40A x 2
• CEA-2006 compliant amplifier
• 4 gauge OFC power and ground wiring is recommended for installation
• Dimensions: 7.95"W x 9.00"L x 2.10"H
• Authorized Internet Dealer
• 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer)

General Features:

• 10" Dual 2-ohm VC-Series Car Subwoofer
• Power Handling:
• RMS Power Range: 600-750 watts
• Impedance: Dual 2 ohm
• Pressed paper cone with woven fiber top
• Custom High Roll foam surround with Nylon stitching
• Die-Cast aluminum basket for maximum rigidity
• Dual Poly-Cotton Spiders
• 2-1/2" Aluminum Voice coil
• 127oz. Triple stacked Ferite magnet motor structure with protective rubber boot
• Frequency response: 20-220 Hz
• Resonance Frequency (Fs): 29 Hz
• Optimal sealed box volume .65 cubic feet
• Optimal ported box volume: 1.0 cubic feet
• Top-mount depth: 6"
• Sensitivity: 83dB
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Additional Information:

*CEA-2031 Compliant: All CEA-2031 compliant loudspeakers adopt the same testing and measurement methods so comparing them side by side is easy. Loudspeakers include car speakers and subwoofers. The Consumer Electronics Association created new testing and measurement methods for mobile loudspeaker systems that define test procedures for rating the performance and physical size of speakers. This is important because you can now compare different speakers on the same playing field. Any manufacturers who adopt the CEA-2031 logo product mark can be compared evenly to other speaker manufacturers with the same mark.

Amplifier Kit Features:

• 4 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems up to 1000 watts RMS
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• The solid brass and satin-chromed ANL/Mini-ANL Fuse Holder offers ideal protection for high powered systems
• Strand Count: 1862
• BC-5W2 Compliant
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Kit includes:

1. 20 ft. (6.1 meters) Frosted Blue 4 gauge power wire with seamless crimp ring terminal
2. 3 ft. (.91 meters) Frosted Gray 4 gauge ground wire with seamless crimp ring terminal
3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
4. 40 ft. (12.2 meters) Frosted Gray/Blue 16 gauge speaker wire
5. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
6. One 1/2" black rubber firewall grommet
7. Two 4 gauge spade terminals
8. Two black 16 gauge nickel-plated spade lugs
9. Three blue 16 gauge nickel-plated spade lugs
10. One black 18 gauge spade terminal
11. Two 18 gauge red butt connector
12. Ten 6" black zip ties