Universal-Fit Audio for 1997 Eagle Vision

---

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Master ANL Fuse Holder
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Ouput Gauge Size: 1/0 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 1
• Brass material with marine stannum plating

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 85.37 dB

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• 2-Channel Speaker Wire to RCA Adaptor for High-Level Signal Connection to Amplifiers
• Left and Right Channel Male RCA Plugs to Parallel Speaker Cable
• Satin Black Jacket

• 1200 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 1.375"
• Color: Black

• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 3.86"
• Sensitivity: 84.8 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.315 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Anthracite

• Swivel mount clamp fixture for ETXv3 tower speakers
• Connects with swivel mount clamps (clamps not included)
• Designed for 2006-up OEM MasterCraft Tower
• Sold as pair (2 swivel mount clamp fixture)

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier