Universal-Fit Audio for 2001 Chevrolet Tracker

---

• 300 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• Includes Amplifier Wiring Kit

• 150 Watts RMS x 1 @ 4 ohm
• 250 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 250 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• Sub Infrasonic Filter: 15 Hz - 40 Hz

• CVP Series 2-Channel Amplifier
• 200W x 2 @ 2Ω / 125W x 2 @ 4Ω
• 2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• Includes Amplifier Wiring Kit

• RMS: 150 x 4 @ 4 ohm, 250W x 4 @ 2 ohm, Bridged 500W x 2 @ 4 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Efficient Full Range Class D Design
• Dimensions: 12.1"W x 5.4"D x 2.0H

• Class H Amp Technology
• 4 Ohm Stable Bridged: 200 Watts RMS x 2
• Variable High and Low-Pass Filters
• Variable Crossover
• Full On Board Protection

• DS18 SMD-300.4AB 1200W RMS Class AB 4-Channel Car Amplifier
• Wired Bass Remote for Precision Level Control
• NVX XKIT44 Full Spec 4 Gauge 100% OFC Wiring Kit
• Complete 4-Channel Copper Installation Solution with RCA
• High-Performance Setup for Amplifiers up to 1500 Watts

• DS18 SMD-2000.1D 2000W RMS Class D SMD Series Monoblock Car Amplifier
• Wired Bass Remote for Easy Level Control
• NVX XKIT02 100% Copper 1/0 Gauge True Spec Amplifier Installation Kit
• 1.0 Farad Digital Power Capacitor
• Complete Wiring Solution includes RCA Interconnects and 20 ft Speaker Cable

• DS18 SMD-3000.1D 3000W RMS Class D Monoblock Car Amplifier
• Integrated VM-1 Voltmeter and Digital LED Lights with Bass Remote
• NVX 1/0 Gauge 100% Copper True Spec Installation Kit
• 1.0 Farad Capacitor for Enhanced Power Stability
• Complete Wiring Solution with RCA Interconnects and 20 ft Speaker Cable

• 300 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• CEA-2006 Compliant
• Top Mounted Control Panel
• Class-D Amplifier
• Includes Amplifier Wiring Kit

• 500 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 4 ohm: 325 Watts x 1 chan. / 2 ohm: 600 Watts x 1 chan. / 1 ohm: 1200 Watts x 1 chan.
• Total power output: 1200 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz
• Includes Amplifier Wiring Kit

• RMS: 200 Watts x 2 @ 4 ohm, 250 Watts x 2 @ 2 ohm, Bridged: 500 Watts x 1 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 6.61" L x 1.40" H

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

• 200 watts x 4 channel @ 4 ohm
• 320 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier
• Includes Amplifier Wiring Kit

• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 500 Watts RMS x 1 @ 4 ohm
• 750 Watts RMS x 1 @ 2 ohm
• 750 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1500 Watts
• CEA-2006 Compliant
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Dual extruded heat sinks
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Real time thermal sensing with Rollback technology
• Dimensions: 4.3"W x 8.3"L x 1.6"H

• CVP Series Monoblock Amplifier
• 200W RMS X 1 @ 2Ω / 120W RMS X 1 @ 4Ω
• 1-Ohm Stable Class D Monoblock Operation
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• 200mV-6V High Level or Low Level RCA Input
• Includes Amplifier Wiring Kit

• 125 watts x 4 channel + 300W x1 @ 4 ohm
• 200 watts x 4 channel + 500W x 1 @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 800W @ 1 ohm
• Total RMS Power: 1600 watts
• Class D 1 ohm Stable 5-Channel-Channel Amplifier
• Includes Amplifier Wiring Kit

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
• Includes Amplifier Wiring Kit

• 40 watts x 4 channel + 200 watts x 1 channel @ 4 ohm
• 60 watts x 4 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 120 watts x 2 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 540 watts
• CEA-2006 Compliant
• Class D 2 ohm Stable 5-Channel Amplifier