Earthquake Sound T46
600W Peak 4x6” TNT Series 2-Way Coaxial 4-ohm Car Speakers
600W Peak 4x6” TNT Series 2-Way Coaxial 4-ohm Car Speakers
• 300 watts Peak Each
• 1" Mylar Dome Tweeters
• Low Mass Poly-Injection cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
VIP Product Get $8.00 in rewards to spend later
Install kits available for this speaker
- Knee Panel with adapters required
Earthquake Sound VTEK-MC5
1000W RMS 5.25" VTEK Series 2-Way Component 4-ohm Car Speaker System
1000W RMS 5.25" VTEK Series 2-Way Component 4-ohm Car Speaker System
• 500 watts RMS Each
• 1" Silk Dome Tweeters
• Electroplated Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
VIP Product Get $23.00 in rewards to spend later
Install kits available for this speaker
Earthquake Sound FC5.2
1000W Peak 5.25" Focus Series 2-Way Component 4-ohm Car Speaker System
1000W Peak 5.25" Focus Series 2-Way Component 4-ohm Car Speaker System
• 500 watts Peak Each
• 1-1/2" Silk Dome Tweeters
• Poly-Injection cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
VIP Product Get $15.00 in rewards to spend later
Install kits available for this speaker
Earthquake Sound Focus FC6.2
600W Peak 6.5" Focus Series 2-way 4-ohm Component Speaker System
600W Peak 6.5" Focus Series 2-way 4-ohm Component Speaker System
• 600 watts Peak Each, RMS Each
• 1" Silk Dome tweeters with neodymium magnets
• Low-Mass Poly Injection cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
VIP Product Get $18.60 in rewards to spend later
Install kits available for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
Earthquake Sound F5.25
600W Peak 5.25" Focus Series 2-Way Coaxial 4-ohm Car Speakers
600W Peak 5.25" Focus Series 2-Way Coaxial 4-ohm Car Speakers
• 300 watts Peak Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
VIP Product Get $10.80 in rewards to spend later
Save up to $6 on install kits for this speaker
Earthquake Sound EQ650NEO (Sold Individually)
400W Peak (200W RMS) 6.5" EQ NEO Series Pro Audio Midrange 8-ohm Car and PA Speaker
400W Peak (200W RMS) 6.5" EQ NEO Series Pro Audio Midrange 8-ohm Car and PA Speaker
• 400 watts Peak, 200 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 95 dB
VIP Product Get $17.50 in rewards to spend later
Save $38 on install kits for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
Earthquake Sound T65
800W Peak 6.5" TNT Series 2-Way Coaxial 4-ohm Car Speakers
800W Peak 6.5" TNT Series 2-Way Coaxial 4-ohm Car Speakers
• 400 watts Peak Each
• 1.18" Mylar Dome Tweeters
• Poly-Injection cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
VIP Product Get $13.60 in rewards to spend later
Install kits available for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
Earthquake Sound VTEK-52Xi
800W RMS 5.25" VTEK Series 2-Way Coaxial 2-ohm Car Speakers
800W RMS 5.25" VTEK Series 2-Way Coaxial 2-ohm Car Speakers
• 400 watts RMS Each
• 3/4" Silk Dome swiveling tweeters
• Glass Carbon Fiber cone material
• Impedance: 2 ohm
• Sensitivity: 89 dB
VIP Product Get $15.90 in rewards to spend later
Save up to $35 on install kits for this speaker
Earthquake EQ6-S8
400W Peak 6.5” EQ Series 8-ohm Midbass Car Speakers
400W Peak 6.5” EQ Series 8-ohm Midbass Car Speakers
• 200 watts Peak Each
• Paper cone material
• Impedance: 8 ohm
• Sensitivity:
VIP Product Get $6.50 in rewards to spend later
Save $73 on install kits for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
Earthquake Sound EQ6-8 (Sold Individually)
400W Peak 6.5” EQ Series Mid-Bass 8-ohm Car Speaker
400W Peak 6.5” EQ Series Mid-Bass 8-ohm Car Speaker
• 200 watts Peak
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 96 dB
Install kits available for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
Earthquake Sound VTEK-MC5 with Installation Accessories
100W RMS 5.25" 2-Way Component Speaker System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
100W RMS 5.25" 2-Way Component Speaker System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 500 watts Peak Each, 50 watts RMS Each
• 1" Silk Dome Tweeters
• Electroplated carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
Save up to $115 on install kits for this speaker
• 500 watts Peak Each, 50 watts RMS Each
• 1" Silk Dome Tweeters
• Electroplated carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
Earthquake EQ6-8 with Installation Accessories
50W RMS 6.5” Midbass Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
50W RMS 6.5” Midbass Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 200 watts Max
• 50 watts RMS
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 89.7 dB
• Mounting Depth: 2-5/8"
Save $80 on install kits for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
• 200 watts Max
• 50 watts RMS
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 89.7 dB
• Mounting Depth: 2-5/8"
Earthquake Sound FC6.2 with Installation Accessories
600W 6-1/2" 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
600W 6-1/2" 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 6-1/2" 2-way Focus Series Component System
• Low Mass Poly Injection Woofer Cone
• 1" Silk Dome Tweeter
• NOMEX / ROMEX Spider Assemblies
• Speaker Grilles Included
• 4 ohm Impedance
• Separate Filters for Bass and Tweeter
Save $3 on install kits for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
• 6-1/2" 2-way Focus Series Component System
• Low Mass Poly Injection Woofer Cone
• 1" Silk Dome Tweeter
• NOMEX / ROMEX Spider Assemblies
• Speaker Grilles Included
• 4 ohm Impedance
• Separate Filters for Bass and Tweeter
Earthquake Sound VTEK-52XI with Installation Accessories
200W RMS 5-1/4" 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
200W RMS 5-1/4" 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 5-1/4" VTEK Series 2-Way Coaxial Car Speakers
• Tri-Layer Woven Glass Fiber Cones
• PistonMax Wide Surrounds
• 3/4" Silk Dome Swivel Tweeters
• Die-Cast Aluminum Baskets
• Diamond Cut Brushed Lips
• Woofer Protection Circuitry
Save up to $81 on install kits for this speaker
• 5-1/4" VTEK Series 2-Way Coaxial Car Speakers
• Tri-Layer Woven Glass Fiber Cones
• PistonMax Wide Surrounds
• 3/4" Silk Dome Swivel Tweeters
• Die-Cast Aluminum Baskets
• Diamond Cut Brushed Lips
• Woofer Protection Circuitry
Earthquake Sound FC5.2 with Installation Accessories
500W RMS 5-1/4" 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
500W RMS 5-1/4" 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 5-1/4" 2-way Performance Series Component System
• Low Mass Poly Injection Woofer Cone
• 1" Silk Dome Tweeter
• Selectable Tweeter Level
• Speaker Grilles Included
• 4 ohm Impedance
• Separate Filters for Bass and Tweeter
Install kits available for this speaker
• 5-1/4" 2-way Performance Series Component System
• Low Mass Poly Injection Woofer Cone
• 1" Silk Dome Tweeter
• Selectable Tweeter Level
• Speaker Grilles Included
• 4 ohm Impedance
• Separate Filters for Bass and Tweeter
Earthquake EQ6-S8 with Installation Accessories
120W RMS 6.5” Midbass Car Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
120W RMS 6.5” Midbass Car Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 200 watts Peak , 60 watts RMS
• Paper cone material
• Impedance: 8 ohm
• Sensitivity:
Save $101 on install kits for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
• 200 watts Peak , 60 watts RMS
• Paper cone material
• Impedance: 8 ohm
• Sensitivity:
Earthquake Sound T65 with Installation Accessories
800W 6.5" 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
800W 6.5" 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 400 watts Peak Each
• 1-3/16" Mylar Dome Tweeters
• Low-Mass Poly Injection cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Install kits available for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
• 400 watts Peak Each
• 1-3/16" Mylar Dome Tweeters
• Low-Mass Poly Injection cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Earthquake Sound F5.25 with Installation Accessories
300W RMS 5-1/4" 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
300W RMS 5-1/4" 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 5-1/4" 2-way Performance Series Component System
• Low Mass Poly Injection Woofer Cone
• 3/4" Silk Dome Tweeter
• Selectable Tweeter Level
• Speaker Grilles Included
• 4 Ohm Impedance
• Separate Filters for Bass and Tweeter
Install kits available for this speaker
• 5-1/4" 2-way Performance Series Component System
• Low Mass Poly Injection Woofer Cone
• 3/4" Silk Dome Tweeter
• Selectable Tweeter Level
• Speaker Grilles Included
• 4 Ohm Impedance
• Separate Filters for Bass and Tweeter
Earthquake T46 with Installation Accessories
300W RMS 4X6” 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
300W RMS 4X6” 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 1" Mylar Dome Tweeters
• Poly-Coated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
• Mounting Depth: 2-5/16"
Save $25 on install kits for this speaker
- Knee Panel with adapters required
• 1" Mylar Dome Tweeters
• Poly-Coated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
• Mounting Depth: 2-5/16"
Earthquake Sound VTEK-62
1000W RMS 6.5" VTEK Series 2-Way Coaxial 4-ohm Car Speakers
1000W RMS 6.5" VTEK Series 2-Way Coaxial 4-ohm Car Speakers
• 500 watts RMS Each
• 3/4" Silk Dome swiveling tweeters
• Glass Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
VIP Product Get $13.60 in rewards to spend later
Install kits available for this speaker
- Rear Seat Side Panel
- Rear Seat Side Panel with adapters required
• 500 watts RMS Each
• 3/4" Silk Dome swiveling tweeters
• Glass Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB



































