Universal-Fit Audio for 2003 Saturn Vue

---

• Fits 4 x 6.5 coaxial speakers and 2 x 4" tweeters
• Specially designed for Jeep and ATV/UTV
• IP65 marine certified
• ABS Plastic construction and Raw Textured Plastic finish
• Dimensions: 37.08" L x 4.3" W x 7.09" H

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• 60 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Works in select 2018-up Chrysler-built vehicles
• Sold as a pair

• 1" Pro-Audio Bullet Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• 8" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Easy installation, glue is not included but required

• 2600 watts x 1 channel @ 4 ohm
• 3300 watts x 1 channel @ 2 ohm
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 1200 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 4 ohm
• Paper Cone
• Foam Surround
• Mount depth: 8.86"
• Sensitivity: 88 dB

• Universal rubber mast top side mount antenna
• Support and elevate an antenna for AM/FM
• Features 1" swivel base for easy adjustment

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• 2-Channel 8000 Series RCA Interconnect Cable
• 17 ft. Cable Length
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• Molded Strain Reliefs

• 400 feet 16 gauge K-Series Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Frosted Clear

• Swivel mount clamp for ETXv3 tower speakers
• Designed to fit tower speakers or roll bars
• Sold as pair (2 swivel mount clamps)
• Inner clamp diameter: 2" (50.8mm)

• Waterproof Connectors
• 2C Plug in Connector
• Male/Female
• 12 Gauge

• 35" High Density ABS Universal Speakers Enclosure
• Durable Injected High Density ABS Medium Density Fiberboard (MDF) construction
• Houses 4 6.5" speakers and 2 3" tweeters
• Water Resistant IP65

• Universal 42" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes rear/side brackets and mounting hardware

• Enables compatible Kenwood dash cam parking mode
• Connects to 12-volt or 24-volt systems
• Smart Parking mode is ACC power (accessory power) controlled

• 500 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• 750 watts x 1 channel @ 1 ohm
• Total RMS Power: 750 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Blue LED illuminated ring

• 200 Amp Battery Isolator
• 200 Amps at 12V Continuous
• 300 Amps Surge
• Switching Power: 10 - 16 VDC

• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.000" (50.8 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• 2000 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• 2500 watts x 1 channel @ 1 ohm
• Total RMS Power: 2500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 72" RGB LED Antenna Whip
• 360-degree illumination for more visibility
• 92 customizable modes, 16 speed levels, and 16 brightness levels
• Controllable with BLEDIM2 app for Apple and Android

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 1800 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• 10" White closed style grille for REV 10 marine tower speakers
• Ideal for marine or outdoor applications
• Easy to install and replace, no drilling required
• Includes (2) speaker grilles and (8) 12mm hex-head screws

• 12" L7XS Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Interchangeable in impedances
• 10 minutes to replace a woofer cone
• XS spacing needles
• Impedance: Dual 1-ohm

• 12" L7XS Series Dual 2-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Interchangeable in impedances
• 10 minutes to replace a woofer cone
• XS spacing needles
• Impedance: Dual 2-ohm

• Mounting clamp for Stealth soundbars with 0.75" square tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 8.86"
• Sensitivity: 88 dB

• 1-Way Keyless Entry Car Alarm
• 4-button transmitter
• 1320 ft. range
• Valet switch and LED

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• SoloKon Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-1/8"
• Sensitivity: 86.54 dB

• Linking bracket for two 10" Alpine Halo loaded sub enclosures
• Fits the S-SB10V and R-SB10V
• Heavy-duty steel rear link bracket and port link bracing
• Stainless steel Alpine badge
• All hardware included

• Front and rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 8
• Detection Distance: 1 feet to 5.9 feet

• Peak Power: 1500 watts
• RMS Power: 350 watts
• Impedance: Single 4 ohm
• Paper cone with Polypropylene cap
• Rubber surround
• Mount depth: 5-3/8"
• Sensitivity: 86 dB

• Universal 1" Speaker Spacer Rings for 6" to 6.75" Aftermarket Car Speakers
• Color: Black
• High Grade ABS Plastic Construction
• Factory Matched Texture Style

• 75 watts x 4 channel + 200 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 400 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Sealed enclosure with 1 10" Subwoofer
• 300 watts RMS (600 watts Peak)
• Includes plug and play wire harness kit
• Dimensions: 10" L x 12.28" H x 14.21" W

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 85.37 dB