Universal-Fit Audio for 2008 Dodge Sprinter Cargo

---

• Ported enclosure with 1 12" W6 v3 Series Subwoofer
• 600 watts RMS
• Final Impedance: 2-ohm
• Dimensions: 14.5" L x 16" H x 24" W

• 3 Ft (0.91 m) Marine Audio 2-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• Media Master Remote controller cable
• 25-foot Extension Cable

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.50 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 speaker models

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Anthracite

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Red

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Warm White

• 10" Subwoofer Mesh Grille Insert for W6v2 and W6v3 Subwoofers
• Powder-coated steel mesh grille in satin black finish
• Protects subwoofers against potential damage

• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 3.86"
• Sensitivity: 84.8 dB

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.000"
• Color: Black

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 85.37 dB

• Male to male audio cable
• Fits all standard Mini 3.5 mm (1/8 in.) jacks
• Pure OFC Copper Conductors with Polyethylene Dielectrics
• Machined Brass Connector Elements

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 25ft. 16 AWG Premium Series Speaker Cable
• OFC Copper for flexibility and conductivity

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.60"
• Sensitivity: 84.2 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• 3 Ft. 2-Channel Premium Audio RCA Interconnect Cable
• Pure OFC copper conductors and polyethylene dielectrics
• Twisted-pair wire construction to reject noise
• Braided black outer jacket for protection
• Cable Length: 3 feet / 0.91 meter

• ProWedge 13" W7AE Loaded Sealed Subwoofer Enclosure
• 3000W Peak
• 1500W RMS
• 3 Ohm Final Impedance
• High Grade Black Carpet Finish
• Engraved JL Audio and W7 Logos
• Rear Firing Design
• 10th Anniversary Edition W7 Subwoofer