Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In

2013 Audi A5

Change vehicle | Remove vehicle

Use our shopping filters to find the right 2/3/4-channel amp to power upgraded speakers properly.

Overview Upgrade your Speakers Add a Subwoofer Add an Amplifier Digital Sound Processors Audio Installation & Accessories Add a Backup Camera Dads & Grads Sale

Amps for Adding Speakers for 2013 Audi A5

Some vehicles require an amp bypass module, a line-output converter like the NVX XLCA2 or AudioControl LC2i, or a DSP to integrate with your factory radio and avoid bass roll-off. Bass roll-off occurs when a factory radio's crossover is designed only for the original equipment speakers, resulting in a not complete signal being sent to your new aftermarket amp.

Filters
Key Series ✕
Clear Filters
Reset Done
Brands
Kicker (1)

We are sorry, no available results!

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Key Series,
You Recently Chose:
XDM Series (15)
Terminator Series (3)
M5 Series (2)
Punch Series (32)
Machete Series (19)
V Series (18)
Power Series (15)
Prime Series (13)
Hydro Series (12)
CVP Series (11)
VXi Series (10)
FRP Series (9)
SXE Series (9)
Gen-X (8)
Ground Pounder Series (7)
Marine V Series (7)
MVi Series (7)
Reference Series (7)
eXcelon Series (6)
KXM Series (6)
M2 Series (6)
Nautic Series (6)
RD Series (6)
SMD Series (6)
BX Series (5)
Club Series (5)
Elite Series (5)
HED Series (5)
MUD Series (5)
N Series (5)
SAE Series (5)
Stroker Pro Series (5)
SYN-DX Series (5)
Thunder Series (5)
VEGA Series (5)
Venezia Series (5)
Apocalypse Sport Series (4)
Brutus BG Series (4)
CRA Series (4)
CX Series (4)
DSP Series (4)
HCP Series (4)
HEX Series (4)
iON Series (4)
JA Series (4)
KM Series (4)
MA Series (4)
Mean Machine Series (4)
Micro Series (4)
MX Series (4)
R-Series (4)
SALT Series (4)
SFB Series (4)
Stealth Bomber Series (4)
Stroker RPM Series (4)
V-Drive Series (4)
XED Series (4)
ACX Series (3)
AP Series (3)
Apex Series (3)
Apocalypse Atom Pro Series (3)
Bomber Series (3)
Brutus BRL Series (3)
D Series (3)
Diamond Elite Series (3)
Discus Series (3)
DXM Series (3)
Epic Series (3)
GM Series (3)
HD Series (3)
HTM Series (3)
JD Series (3)
Kappa Perfect Series (3)
LX Series (3)
M Series (3)
Marine Series (3)
NXL Series (3)
Power Pack Series (3)
Premium Pro Series (3)
PS Series (3)
Rebel Series (3)
S Series (3)
Sinister Series (3)
Stroker Series (3)
Trident Series (3)
X Series (3)
Zeus Series (3)
ZR Series (3)
Altitude Series (2)
Buran Series (2)
COLOSSUS Mini Series (2)
COLOSSUS Series (2)
Compact Mean Machine Series (2)
Competition Series (2)
DB Series (2)
DMD Series (2)
DRVN Series (2)
Edge Series (2)
Excelon Motorsports Series (2)
Excelon Reference Series (2)
Formula Series (2)
Godfather Series (2)
Hooligan Series (2)
HRPM Series (2)
HXM Series (2)
LC Series (2)
MDX Series (2)
MHD Series (2)
MicroV2 Series (2)
N-Series (2)
PowerZone 2 Series (2)
Punch BR Series (2)
PXA Series (2)
QS Series (2)
SAM Series (2)
Signature Series (2)
SPL Show Series (2)
Stage GT Series (2)
Status Series (2)
Stealth Mini Series (2)
VFL Series (2)
WET Series (2)
ACM Series (1)
Alpha Series (1)
Atom Series (1)
CVPRO Series (1)
DC Series (1)
EV Series (1)
FX Series (1)
GT Series (1)
HCCA Series (1)
HMS Series (1)
HMP Series (1)
HTX Series (1)
Key Series (1)
KPX Series (1)
Micro8U Series (1)
Mille Pro Series (1)
MINI BANG Series (1)
Mini Series (1)
MotorSport Series (1)
Performance Series (1)
Picasso-Nano Series (1)
Primo Series (1)
Primus Series (1)
PXE Series (1)
Q-Series (1)
RPM Series (1)
RTX Series (1)
Smash Series (1)
SPL (1)
SPX Series (1)
Stealth STX Series (1)
VFL Comp Series (1)
VFL Stealth Series (1)
Warhorse Series (1)
XC-Series (1)
XFL Series (1)
XQ Series (1)
ZXI Series (1)
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
filter-icon Filters & Sort
Limited time!

Kicker KEY200.4 (47KEY2004)

200W RMS KEY Series 4-Channel Smart Amplifier with Automatic EQ and Processor

47KEY200.4 big
Go to item page Right Arrow Icon of Right Arrow

Kicker KEY200.4 (47KEY2004)

200W RMS KEY Series 4-Channel Smart Amplifier with Automatic EQ and Processor

• 50 watts x 4 channel @ 4 ohm
• @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 200 watts
• Class 4 ohm Stable 4-Channel Amplifier

shipping truck icon Free shipping in USA. Provide zip for delivery date.
VIP Star Icon

VIP Product Get $24.00 in rewards to spend later

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

4
List price $329.99
Save $90.03
-27% $239.96

In stock

Add to Cart

• 50 watts x 4 channel @ 4 ohm
• @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 200 watts
• Class 4 ohm Stable 4-Channel Amplifier

 
    Clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    FAQ for Multi-channel Amplifiers for Adding Speakers in 2013 A5

    Q: Can I upgrade or change the Multi-channel Amplifiers for Adding Speakers in 2013 Audi A5?

    A: Yes this page includes all the best Multi-channel Amplifiers for Adding Speakers that work in your A5.

    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2013 Audi A5

    2014 Mercedes-Benz ML350

    2011 Honda Element

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2013 A5
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo