Universal-Fit Audio for 2019 BMW X2

---

• Roof Mount Amplified Antenna
• Shark fin design for sleek installation
• Color: Black

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• 2-Way Remote Car Starter
• 5-Button LCD Transmitter
• 3000 feet of range (0.56 miles)
• Multi-vehicle functionality

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 100 watts x 2 channel @ 4 ohm
• 150 watts x 2 channel @ 2 ohm
• Bridged: 300 watts x 1 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class A/B 2 ohm Stable 2-Channel Amplifier

• Swivel Mount for MB Quart Speakers
• Fits NT1, NT2, NHT1 Speakers
• Lock Nut Secures Adjustments
• Attaches Between Speaker Pod and Mounting Bracket
• Sold Individually

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• Wired Bass Remote Controller
• Compatible with AudioControl Epicenter Micro and AudioControl EPICENTER MICRO PRO
• Dash-mountable or center-console installation
• Color: Black

• 875 watts x 1 channel @ 4 ohm
• 1750 watts x 1 channel @ 2 ohm
• 3500 watts x 1 channel @ 1 ohm
• Total Peak Power: 3500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 7.7" Carbon Fiber speaker sport grille insert for M6 series marine speakers
• Ideal for marine or outdoor applications
• Easy to install and replace, no drilling required

• 36" RGBW LED wire extension
• Male micro-DIN 5-pin and female micro-DIN 5-pin connectors
• Designed for use with Metra RGBW-CB2 (Sold separately)

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• 1/4in size plus 25 percent edge overlap
• 100Ft Box Dispenser
• Semi-rigid braid design simply closes around the entire installation
• Cut and abrasion resistant

• Multi-Stage Charging
• Output Display
• Internal Cooling Fan
• Voltage Monitoring

Single conductor wire • Length: 500ft • Flexible jacket • Gauge: 18 Gauge •

• Wired marine remote control without display
• Compatible with select Clarion stereos
• Easily adds up to 3 remotes
• IP67-rated water resistant design

• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• Designed to be flexible, allowing users offers limitless combinations of amplifiers and channel architectures
• USB port available for firmware updates
• TüN software controlled by master MVi amplifier

• Adds additional inputs to display to monitor(s)
• Works great with vehicles limited to only one video input
• Equipped with a noise resistant aluminum shield
• Kit includes module and male to male RCA cable adapter

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• 300 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• CEA-2006 Compliant
• Top Mounted Control Panel
• Class-D Amplifier
• Includes Amplifier Wiring Kit

• Manual Window Crank Retainer Clips
• Pack of 10

• (2) 1/0 AWG - 10 AWG plus (2) 4 AWG - 10 AWG Out
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
• Nickel finish for durability

• 12" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Universal Dual 1/0 to 1/0 Gauge Amp Inputs
• Merges two 1/0-gauge cables into one input
• Precision machined construction
• Sold as pair

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• Wired Bass Remote Controller
• Compatible with select AudioControl processors
• Dash-mountable or center-console installation
• Color: Black

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 2-Way Remote Start, Keyless Entry and Car Alarm LCD Transmitter
• Includes (1) 5-button LCD transmitter
• 1 mile range
• Compatible with Viper security systems

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

• Protect your battery from heat and keep it in position
• Constructed from heavy gauge steel
• Has holed flanges at the bottom for permanent mounting.

• Sealed truck enclosure with 1 10" Prime R2 Series Subwoofer
• 200 watts RMS (400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 19" L x 13.5" H x 5.25" W x 3.25" W2

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 1-Way Keyless Entry Car Alarm
• Two 4 Button Transmitters
• 500' Range
• Dual zone shock sensor included • Valet Mode
• Remote Panic Operation
• Starter Interrupt included

• 75 watts x 4 channel + 200 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 400 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Peak Power: 1050 watts
• RMS Power: 350 watts
• Impedance: Dual 2 or 4 ohm
• Aluminum Cone
• Hi-Roll Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 81 dB

• Digital LED Remote Controlled Via (Magic Lantern) Phone App
• Compatible with Diamond Audio HXMF Series speakers
• 8 outputs with Remote Trigger
• Change Speed, Strobe, and Various Other Lighting Feature Modes

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.45"
• Sensitivity: 86 dB

• Mounting clamp for Stealth soundbars with 1.25" square tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• Peak Power: 5000 watts
• RMS Power: 2500 watts
• Impedance: Dual 2 ohm
• Pressed Paper Cone
• Mega Roll V2 Surround
• Mount depth: 13.6"
• Sensitivity: 87.6 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 4-ohm
• CA glue adhesive is NOT included

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 400 feet 16 gauge K-Series Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Frosted Clear

• 10" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 500 Amp Battery Isolator
• 500 Amps at 12V Continuous
• 700 Amps Surge
• Switching Power: 10 - 16 VDC

• 4" VEGA or HED Speaker Mesh Grille
• Designed for VEGA or HED series speakers
• Metal mesh grilles with embossed logo
• Sold per pair / two grilles

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

New - Motorized WHITE 50Watt LED Spot Light with Remote Swivel Functionality

• 1/4 inch
• refill package
• heat shrink < /br>

• 10" Amplified Loaded Subwoofer System
• 300 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor