Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued Class-D Amplifiers

Discontinued Class-D Amplifiers

Filters
Amplifiers with a wiring kit ✕
Clear Filters
Reset Done
Product Type
Amplifiers with a wiring kit,
Price Range
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.
EXCLUSIVE

Hifonics ZXX-1200.1D 1200 Watt Zeus Amplifier + 4 Gauge Amp Kit

Complete 4 Gauge Amp Installation Wire Kit Included!!!

ZXX-1200.1D, BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics ZXX-1200.1D 1200 Watt Zeus Amplifier + 4 Gauge Amp Kit

Complete 4 Gauge Amp Installation Wire Kit Included!!!

• 400 Watts Peak x 1 @ 4 ohm
• 600 Watts Peak x 1 @ 2 ohm
• 1,200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 1,200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 12.6" W x 10" L x 2.4" H

71

• 400 Watts Peak x 1 @ 4 ohm
• 600 Watts Peak x 1 @ 2 ohm
• 1,200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 1,200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 12.6" W x 10" L x 2.4" H

EXCLUSIVE

MTX Audio JackHammer JH1200 + Amplifier Kit

2400W Max, Class D Monoblock Jack Hammer Series Amplifier w/ 4 Gauge Amplifier Kit

JH1200_ISPKBL4-BG big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

MTX Audio JackHammer JH1200 + Amplifier Kit

2400W Max, Class D Monoblock Jack Hammer Series Amplifier w/ 4 Gauge Amplifier Kit

2400 Watt MTX Audio JackHammer Series Class D Monoblock Amplifier • 400 watts x 1 chan. @ 4 ohm • 800 watts x 1 chan. @ 2 ohm • 1200 watts x 1 chan. @ 1 ohm • Tuned Bass EQ • Internal Fan • Includes 4 Gauge Amplifier Kit

2400 Watt MTX Audio JackHammer Series Class D Monoblock Amplifier • 400 watts x 1 chan. @ 4 ohm • 800 watts x 1 chan. @ 2 ohm • 1200 watts x 1 chan. @ 1 ohm • Tuned Bass EQ • Internal Fan • Includes 4 Gauge Amplifier Kit

Hifonics ZXX-1200.1D 1200W Amplifier + 4 Gauge Amp Kit + 1 Farad Capacitor

Zeus Series Class-D Monoblock Bass Package

ZXX-1200.1D, BB1D, BAk42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics ZXX-1200.1D 1200W Amplifier + 4 Gauge Amp Kit + 1 Farad Capacitor

Zeus Series Class-D Monoblock Bass Package

• 400 Watts Peak x 1 @ 4 ohm
• 600 Watts Peak x 1 @ 2 ohm
• 1,200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 1,200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 12.6" W x 10" L x 2.4" H

150

• 400 Watts Peak x 1 @ 4 ohm
• 600 Watts Peak x 1 @ 2 ohm
• 1,200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 1,200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 12.6" W x 10" L x 2.4" H

Hifonics Zeus ZXX-1800.1D 1800W RMS Mono Class D Car Audio Amplifier+Amp Kit

1800W Peak Zeus Series Class-D Monoblock 1-Ohm Stable Amplifier (ZXX-18001D) Package

ZXX-1800.1D, BAK02 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics Zeus ZXX-1800.1D 1800W RMS Mono Class D Car Audio Amplifier+Amp Kit

1800W Peak Zeus Series Class-D Monoblock 1-Ohm Stable Amplifier (ZXX-18001D) Package

• 900 Watts Peak x 1 @ 4 ohm
• 800 Watts Peak x 1 @ 2 ohm
• 1,600 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 1,600 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 15.7" W x 10" L x 2.4" H

18

• 900 Watts Peak x 1 @ 4 ohm
• 800 Watts Peak x 1 @ 2 ohm
• 1,600 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 1,600 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 15.7" W x 10" L x 2.4" H

Autotek SS2500.1D 2500W Amplifier with Amp Kit

Autotek SS2500.1D Super Sport 2500w Mono Car Amplifier Class D+Remote+Amp Kit

SS2500.1D, BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Autotek SS2500.1D 2500W Amplifier with Amp Kit

Autotek SS2500.1D Super Sport 2500w Mono Car Amplifier Class D+Remote+Amp Kit

• 675 Watts Max x 1 @ 4 ohm
• 1250 Watts Max x 1 @ 2 ohm
• 2500 Watts Max x 1 @ 1 ohm
• Total Peak Power: 2500 Watts
• Low-Pass and Subsonic Filters Built In
• 0-12dB Variable Bass Boost
• Heavy-Duty Aluminum Heatsink
• Dimensions: 10" W x 10.25" L x 2" H

65

• 675 Watts Max x 1 @ 4 ohm
• 1250 Watts Max x 1 @ 2 ohm
• 2500 Watts Max x 1 @ 1 ohm
• Total Peak Power: 2500 Watts
• Low-Pass and Subsonic Filters Built In
• 0-12dB Variable Bass Boost
• Heavy-Duty Aluminum Heatsink
• Dimensions: 10" W x 10.25" L x 2" H

EXCLUSIVE

Kicker ZX1500.1 (10ZX1500.1) + Amplifier Kit

1500W RMS, Class D Monoblock ZX Series Amplifier with Included 0 Gauge Amplifier Kit (ZX15001)

10ZX1500.1_09PKD1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker ZX1500.1 (10ZX1500.1) + Amplifier Kit

1500W RMS, Class D Monoblock ZX Series Amplifier with Included 0 Gauge Amplifier Kit (ZX15001)

ZX Series Class D Monoblock Car Amplifier • 750W x 1 chan. @ 4 ohm • 1500W x 1 chan. @ 2 ohm • Balanced Differential Inputs • Muting Circuit • Optional Vinyl Skins For Personalization • Included Matching Kicker 0 Gauge Amplifier Kit • 3-Year Manufacturer Warranty

25

ZX Series Class D Monoblock Car Amplifier • 750W x 1 chan. @ 4 ohm • 1500W x 1 chan. @ 2 ohm • Balanced Differential Inputs • Muting Circuit • Optional Vinyl Skins For Personalization • Included Matching Kicker 0 Gauge Amplifier Kit • 3-Year Manufacturer Warranty

Alpine PDR-M65 + NVX XKIT42

650W RMS PDR Series Monoblock Class D Amplifier + 100% Copper, 2-Chan. True Spec 4 Gauge Amp Installation Kit

PDR-M65_XKIT42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDR-M65 + NVX XKIT42

650W RMS PDR Series Monoblock Class D Amplifier + 100% Copper, 2-Chan. True Spec 4 Gauge Amp Installation Kit

• RMS Power: 450W x 1 @ 4 ohm, 650W x 1 @ 2 ohm
• 1 Pair of Preamp Outputs
• Low Pass Filter
• Dimensions: 9" W x 7-1/8" D x 2-1/16" H
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

125

• RMS Power: 450W x 1 @ 4 ohm, 650W x 1 @ 2 ohm
• 1 Pair of Preamp Outputs
• Low Pass Filter
• Dimensions: 9" W x 7-1/8" D x 2-1/16" H
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

SSL EVO3000.1 3000 Watt Class D 1-Ohm Mono Car Audio Amplifier+Amp Kit+Remote

3000W Max (2250W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included Package

EVO3000.1 BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SSL EVO3000.1 3000 Watt Class D 1-Ohm Mono Car Audio Amplifier+Amp Kit+Remote

3000W Max (2250W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included Package

• 563 Watts RMS x 1 @ 4 ohm
• 1125 Watts RMS x 1 @ 2 ohm
• 2250 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 3000 Watts
• Low-pass and subsonic filters
• 0 - 18dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 12.688" L x 2.3" H

64

• 563 Watts RMS x 1 @ 4 ohm
• 1125 Watts RMS x 1 @ 2 ohm
• 2250 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 3000 Watts
• Low-pass and subsonic filters
• 0 - 18dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 12.688" L x 2.3" H

EXCLUSIVE

Kenwood KAC-8105D + Amplifier Kit

1000W Max, Class D Monoblock Performance Series Power Amplifier w/ 4 Gauge Amp Kit

KAC-8105D_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kenwood KAC-8105D + Amplifier Kit

1000W Max, Class D Monoblock Performance Series Power Amplifier w/ 4 Gauge Amp Kit

Class D Monoblock Car Amplifier • 300W x 1 chan. @ 4 ohm • 500W x 1 chan. @ 2 ohm • 1000W x 1 chan. Max • Speaker-level inputs • Gold Plated Preamp RCA outputs • Includes 4 Gauge Amp Kit

1

Class D Monoblock Car Amplifier • 300W x 1 chan. @ 4 ohm • 500W x 1 chan. @ 2 ohm • 1000W x 1 chan. Max • Speaker-level inputs • Gold Plated Preamp RCA outputs • Includes 4 Gauge Amp Kit

Kicker CX300.1 (12CX300.1) + Free 8 Gauge Amp Install Wiring Kit

300W RMS, Class D Mono Block CX Series Car Amplifier with 8 Gauge Installation Kit

CX300.1_09PK8_BBIC5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CX300.1 (12CX300.1) + Free 8 Gauge Amp Install Wiring Kit

300W RMS, Class D Mono Block CX Series Car Amplifier with 8 Gauge Installation Kit

• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

41

• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

EXCLUSIVE

MB Quart DSC 1500.1D (DSC1500.1D) + Amplifier Kit

1500W RMS, Discus Series Class D Monoblock Amplifier Included 0 Gauge Amplifier Kit (DSC1500.1D)

DSC-1500.1D_PK0Z big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

MB Quart DSC 1500.1D (DSC1500.1D) + Amplifier Kit

1500W RMS, Discus Series Class D Monoblock Amplifier Included 0 Gauge Amplifier Kit (DSC1500.1D)

Discus Series Class D Monoblock Car Amplifier • 375W x 1 chan. @ 4 ohm • 750W x 1 chan. @ 2 ohm • 1500W x 1 chan. @ 1 ohm • Unbalanced RCA inputs • Damping Factor: >180 • Included 0 Gauge Amplifier Kit

37

Discus Series Class D Monoblock Car Amplifier • 375W x 1 chan. @ 4 ohm • 750W x 1 chan. @ 2 ohm • 1500W x 1 chan. @ 1 ohm • Unbalanced RCA inputs • Damping Factor: >180 • Included 0 Gauge Amplifier Kit

JBL CLUB-5501 + Free Belva Amp Kit

1300W Peak (650W RMS) Club Series Class D Monoblock Amplifier

CLUB-5501AM, BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL CLUB-5501 + Free Belva Amp Kit

1300W Peak (650W RMS) Club Series Class D Monoblock Amplifier

• 370 Watts RMS x 1 @ 4 ohm
• 550 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1300 Watts
• Slim Chassis design to fit more vehicles
• Variable Bass Boost
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation

71

• 370 Watts RMS x 1 @ 4 ohm
• 550 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1300 Watts
• Slim Chassis design to fit more vehicles
• Variable Bass Boost
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation

Hifonics BXX1200.1D Car Amplifier + Amp Kit + Capacitor

1200W Max Brutus Series Super Class D 1-Ohm Stable Monoblock Amplifier w/ Bass Knob Included Package

BXX1200.1D, BAK42, BB2D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics BXX1200.1D Car Amplifier + Amp Kit + Capacitor

1200W Max Brutus Series Super Class D 1-Ohm Stable Monoblock Amplifier w/ Bass Knob Included Package

• 400W Max x 1 @ 4 ohm
• 600W Max x 1 @ 2 ohm
• 1200W Max x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• Low Pass and Subsonic Filters
• 0-10 Bass Boost
• Aluminum Heatsink
• 9" W x 13.25" L x 2.5" H

99

• 400W Max x 1 @ 4 ohm
• 600W Max x 1 @ 2 ohm
• 1200W Max x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• Low Pass and Subsonic Filters
• 0-10 Bass Boost
• Aluminum Heatsink
• 9" W x 13.25" L x 2.5" H

Autotek SS1800.1D 1800W Amplifier with Amp Kit

Autotek SS1800.1D Super Sport 1800w Mono Car Amplifier Class D+Remote+Amp Kit

SS1800.1D, BAK42-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Autotek SS1800.1D 1800W Amplifier with Amp Kit

Autotek SS1800.1D Super Sport 1800w Mono Car Amplifier Class D+Remote+Amp Kit

• 450 Watts x 1 @ 4 ohm
• 900 Watts x 1 @ 2 ohm
• 1,800 Watts x 1 @ 1 ohm
• Total Peak Power: 1,800 Watts
•2 Preamp Outputs/LPF
• Variable Bass Boost
• Aluminum Heatsink
• 10" W x 10.25" L x 2" H

63

• 450 Watts x 1 @ 4 ohm
• 900 Watts x 1 @ 2 ohm
• 1,800 Watts x 1 @ 1 ohm
• Total Peak Power: 1,800 Watts
•2 Preamp Outputs/LPF
• Variable Bass Boost
• Aluminum Heatsink
• 10" W x 10.25" L x 2" H

Boss AR3000D 3000W MONO D Car Amplifier + 3.0 Farad Capacitor + Premium Amp Kit

3000W Max Monoblock ARMOR Series Class D Car Amplifier Package

AR3000D V83DDC BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Boss AR3000D 3000W MONO D Car Amplifier + 3.0 Farad Capacitor + Premium Amp Kit

3000W Max Monoblock ARMOR Series Class D Car Amplifier Package

• RMS: 1200W x 1 @ 4 ohm
• Peak: 2200W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Strappable Peak: 6000W x 1 @ 2 ohm
• Bass Boost 0-12 dB
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 12-1/3"W x 5"D x 2-8/10"H

86

• RMS: 1200W x 1 @ 4 ohm
• Peak: 2200W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Strappable Peak: 6000W x 1 @ 2 ohm
• Bass Boost 0-12 dB
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 12-1/3"W x 5"D x 2-8/10"H

Hifonics BXi1608D R/B + Amplifier Kit

1600W RMS Brutus Series Class D Monoblock Amplifier with 0 Gauge Amplifier Kit

BXi1608D-RB_PK0Z big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics BXi1608D R/B + Amplifier Kit

1600W RMS Brutus Series Class D Monoblock Amplifier with 0 Gauge Amplifier Kit

Brutus BXi Series Class D Monoblock Car Amplifier • 50W x 1 chan. @ 4 ohm • 1100W x 1 chan. @ 2 ohm • 1600W x 1 chan. @ 1 ohm • MOSFET power supply • Soft turn-on circuitry • Includes a 0 Gauge Amplifier Installation Kit

20

Brutus BXi Series Class D Monoblock Car Amplifier • 50W x 1 chan. @ 4 ohm • 1100W x 1 chan. @ 2 ohm • 1600W x 1 chan. @ 1 ohm • MOSFET power supply • Soft turn-on circuitry • Includes a 0 Gauge Amplifier Installation Kit

Kicker KXA400.2 (44KXA4002) + Free High Quality Amplifier Wiring Kit

400W RMS KXA Class-D 2-Channel 2-Ohm Stable Amplifier

44KXA4002, XKIT82 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KXA400.2 (44KXA4002) + Free High Quality Amplifier Wiring Kit

400W RMS KXA Class-D 2-Channel 2-Ohm Stable Amplifier

• 100 Watts RMS x 2 @ 4 ohm
•200 Watts RMS x 2 @ 2 ohm
• 400 Watts RMS x 1 @ 4 ohm, bridged
• CEA-2006 Compliant
• Aluminum Heatsink
• Dimensions: 8-5/16" W x 9-9/16" L x 2-1/8" H

61

• 100 Watts RMS x 2 @ 4 ohm
•200 Watts RMS x 2 @ 2 ohm
• 400 Watts RMS x 1 @ 4 ohm, bridged
• CEA-2006 Compliant
• Aluminum Heatsink
• Dimensions: 8-5/16" W x 9-9/16" L x 2-1/8" H

Hifonics Zeus ZXX-3200.1D 3200w RMS Mono Car Audio Amplifier+Amp Kit+Capacitor

Zeus Series Class-D Monoblock Bass Package

ZXX-3200.1D, BAK02, CAP4DR big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics Zeus ZXX-3200.1D 3200w RMS Mono Car Audio Amplifier+Amp Kit+Capacitor

Zeus Series Class-D Monoblock Bass Package

• 800 Watts Peak x 1 @ 4 ohm
• 1600 Watts Peak x 1 @ 2 ohm
• 3200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 3200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 20" W x 10" L x 2.4" H

76

• 800 Watts Peak x 1 @ 4 ohm
• 1600 Watts Peak x 1 @ 2 ohm
• 3200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 3200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 20" W x 10" L x 2.4" H

EXCLUSIVE

Infinity KAPPA-FIVE + Amplifier Kit

1200W Max ,5 Channel Class D Car Amplifier + Kicker 4 Gauge Amplifier Kit + 1 Farad Capacitor

KAPPA-FIVE_09ZCK44 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity KAPPA-FIVE + Amplifier Kit

1200W Max ,5 Channel Class D Car Amplifier + Kicker 4 Gauge Amplifier Kit + 1 Farad Capacitor

Kappa Series 5-Channel Class D Car Amplifier • DirectFET Transistors for Increased Power Output • CEA-2006 Compliant Amplifier • Variable Low-Pass Filter • Variable High-Pass Filter • RX1200 Digital 1.2 Farad Capacitor • Bright LED Voltage Display • For Systems up to 1200 Watts

103

Kappa Series 5-Channel Class D Car Amplifier • DirectFET Transistors for Increased Power Output • CEA-2006 Compliant Amplifier • Variable Low-Pass Filter • Variable High-Pass Filter • RX1200 Digital 1.2 Farad Capacitor • Bright LED Voltage Display • For Systems up to 1200 Watts

EXCLUSIVE

Hifonics Brutus BRX2000.1D 2000W Car Amplifier + 0 Gauge Amp Kit + 1 Farad Cap

Brutus Series Class D Monoblock Subwoofer Amplifier Package

BRX2000.1D, BAK02, BB1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics Brutus BRX2000.1D 2000W Car Amplifier + 0 Gauge Amp Kit + 1 Farad Cap

Brutus Series Class D Monoblock Subwoofer Amplifier Package

• RMS: 700W x 1 @ 4 ohm, 1400W x 1 @ 2 ohm, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H

2

• RMS: 700W x 1 @ 4 ohm, 1400W x 1 @ 2 ohm, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H

1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in Discontinued Class-D Amplifiers

    Class D Amplifiers Frequently Asked Questions (FAQ)
    Class D amplifiers are a type of switching amplifier known for their high efficiency and compact size. Unlike traditional Class A, B, and AB amplifiers that use continuous analog voltage to amplify audio signals, Class D amplifiers employ a digital switching technique. This process rapidly switches the output transistors on and off, effectively turning them into binary switches that deliver the audio signal to the speaker. The switching nature of Class D amplifiers drastically reduces power wastage, resulting in higher efficiency and less heat production. As a result, Class D amplifiers are ideal for applications with limited space or power constraints, making them popular in car audio, home theater systems, and portable devices.
    Yes, modern Class D amplifiers have made significant advancements in audio fidelity and can deliver high-quality sound performance. While traditional audiophiles may have associated Class D with lower audio quality due to early models' limitations, today's Class D amplifiers have overcome many of these challenges. With advancements in switching technology, filtering, and feedback mechanisms, Class D amplifiers can now offer exceptional audio reproduction that rivals traditional Class AB amplifiers. Additionally, Class D amplifiers' efficiency and lower heat generation make them well-suited for high-power audio applications where traditional amplifiers would be impractical.
    Yes, Class D amplifiers are versatile and can power various speaker types, including subwoofers, woofers, mid-range, and tweeters. When selecting a Class D amplifier for your speakers, consider the power output (wattage) and impedance rating. Ensure that the amplifier's power rating matches or slightly exceeds your speakers' power handling capabilities to prevent underpowering or overpowering, which can lead to distortion or speaker damage. Additionally, check the amplifier's impedance range to ensure compatibility with your speakers' impedance. Most Class D amplifiers can handle both 4-ohm and 2-ohm loads, making them suitable for a wide range of speaker configurations.
    No, Class D amplifiers are known for their high efficiency, which results in significantly less heat generation compared to other amplifier classes like Class A or Class AB. The digital switching technique used in Class D amplifiers reduces power loss, resulting in a more efficient conversion of electrical energy into audio output. As a result, Class D amplifiers remain relatively cool even at high volume levels, making them suitable for space-constrained installations and applications where heat dissipation is a concern. Their cool operation also extends the lifespan of internal components and reduces the need for large heat sinks or fans.
    Yes, many Class D amplifiers support bridge mode, allowing you to increase the power output when driving a single speaker or subwoofer. In bridge mode, the amplifier combines the power output from two channels into a single channel, effectively doubling the power delivered to the speaker. However, it's essential to follow the manufacturer's guidelines and ensure that your amplifier supports bridging. Additionally, pay attention to the speaker's impedance requirements, as bridging may change the amplifier's impedance capabilities. If you're unsure or need assistance with bridging your Class D amplifier, contact Sonic Electronix's knowledgeable staff, who can help you find the right amplifier and configuration for your audio setup. With their compact size, high efficiency, and versatility, Class D amplifiers offer a compelling solution for various audio applications, delivering powerful and clear sound performance with minimal heat output.

    All About Discontinued Class-D Amplifiers

    Class D Amplifier Information

    Class D Amplifiers are highly efficient with their power and sound signals..At at least 90 percent efficiency, these amplifiers don’t fall prey to frequent heat sinks so less power is drawn from your car’s charging system and overall smaller internal pieces.

    Onboard circuits in the amp create high frequency pulses of DC  current. The width of this current is modified by the input signal. Through pulse width modulation (PWM), the amp can create a bigger singal with a wider pulse for a high power output. 

    Before the final sound output, the signal is run through a transistor that’s either on or off, then through a low-pass filter to smooth out the PWM carrying frequency. This removes move interference and distortion before the music reaches the speakers.

    Sonic Electronix Learning Center: Amplifier Classes

    If you're searching for the best quality class D amplifiers that deliver superior power and efficiency, you've come to the right place. Our extensive collection features only the most reputable brands and models, ensuring that you can find the perfect class D amplifier to elevate your car audio experience.

    Class D amplifiers have revolutionized the world of car audio with their cutting-edge technology and exceptional advantages. These amplifiers are known for their incredible efficiency, converting nearly all of the input power into amplified output. Unlike traditional class AB amplifiers, class D amplifiers produce minimal heat, making them more energy-efficient and reducing the strain on your vehicle's electrical system. With increased efficiency, you can enjoy powerful and dynamic sound without worrying about excessive power consumption.

    One of the main advantages of having a class D amplifier is its compact size and lightweight design. Due to their high efficiency, class D amplifiers can be made smaller and lighter than their counterparts, making them easy to install in limited spaces within your vehicle. Whether you have a compact car or a custom-built audio system, a class D amplifier will seamlessly fit into your setup, providing incredible audio performance without compromising on space.

    In addition to their efficiency and compact size, class D amplifiers deliver outstanding audio quality. Thanks to advancements in technology, modern class D amplifiers can produce pristine sound reproduction across all frequencies, providing crisp highs, punchy mids, and powerful bass. Whether you enjoy smooth jazz, heart-pounding rock, or booming hip-hop, a class D amplifier will ensure that every note is delivered with clarity and precision.

    At Sonic Electronix, we are committed to helping you find the best class D amplifiers for your car audio needs. Our team of audio experts is here to offer personalized assistance throughout your shopping journey. If you have any questions or need guidance on choosing the perfect class D amplifier, don't hesitate to contact us at 1-502-200-8010. Our knowledgeable staff is eager to provide the information you need and help you make an informed decision that will elevate your car audio experience.

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2003 Audi A4

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2003 A4
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo