Hifonics Zeus ZXX-3200.1D 3200w RMS Mono Car Audio Amplifier+Amp Kit+Capacitor

Zeus Series Class-D Monoblock Bass Package

Hifonics
Shop all Hifonics
highlight-star-icon

• 800 Watts Peak x 1 @ 4 ohms
• 1600 Watts Peak x 1 @ 2 ohms
• 3200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 3200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 20" W x 10" L x 2.4" H

Learn more about the zxx32001d_bak02_cap4dr

We apologize

This item has been discontinued

Description


Hifonics

Authorized dealer

Hifonics ZXX-3200.1D

Zeus Series Class-D Monoblock 1-Ohm Stable Amplifier (3200W Peak)
Quantity: 1

Product Details:

  • Hifonics Zeus ZXX-1800.1D
  • Class-D 1-Ohm Stable Monoblock Amplifier
  • Peak Power Rating:
    • 4 ohms: 800 watts x 1 chan.
    • 2 ohms: 1600 watts x 1 chan.
    • 1 ohm: 3200 watts x 1 chan.
  • Total power output: 3200 watts
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Mono channel operation
  • Speaker-level (high-level) inputs
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Frequency Response: 40 - 300 Hz
  • Signal to Noise Ratio: >95 dB
  • Variable low-pass filter: 40 - 300 Hz, 12 dB/octave
  • Subsonic filter: 10 - 40 Hz , 12 dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
  • Fuse Rating: 70A x 2
  • 2 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 20"W x 10"L x 2.4"H
  • Also found as: ZXX184001D, ZXX-18001D, ZXX 1800-1D, ZXX 1800 1D, Zeus 1800W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the ZXX-3200.1D Owner's Manual

Cadence CAP4DR Capacitor

4 Farad Digital Capacitor, 12 Volt Stiffening Capacitor with 24 Volt Surge Capacity
Quantity: 1

General Features:

  • Digital 4 Farad Capacitor
  • Bright red LED voltage display, blue flashing charge and discharge LED
  • Lucite encased display and logic circuitry
  • IC controlled circuitry with negative polarity protection built-in
  • Includes lucite mounting brackets, mounting hardware and charging resistor with instructions
  • 12 Volt stiffening capacitor with 24 Volt surge capacity
  • Uses ring terminals for use with any gauge of power/ground cable
  • Color: Red
  • Dimensions: 4.25"W x 13"D x 7"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BAK02

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - RED
Quantity: 1

Product Details:

  • 1/0 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 2000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • ANL Fuse holder with a 150 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 1/0 gauge power wire
  2. 3 ft. (.91 meters) Black 1/0 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. One ANL Fuse Holder with a 150 amp ANL fuse
  6. One Black rubber firewall grommet
  7. Three 1/0 Gauge red chrome plated ring terminals
  8. One 1/0 Gauge chrome plated ring terminal
  9. One 18 Gauge red Spade terminal
  10. One 18 Gauge red butt connector
  11. Eight 6" Black zip ties

Product history:

Hifonics ZXX-3200.1D, BAK02, CAP4DR thumbnail
(newest, current model)
Hifonics ZRX3200.1D thumbnail
(previous model, replaced by Hifonics Zeus ZXX-3200.1D 3200w RMS Mono Car Audio Amplifier+Amp Kit+Capacitor)

Specifications & Details


Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
3200 watts
Maximum Input Gauge Size
2 AWG
Minimum Impedance Unbridged
1 ohms
Speaker Level Inputs
Yes
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
40 - 300 Hz
Subsonic Filter
10 - 40 Hz
Signal-to-Noise Ratio
>95 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
250A x 1 
CEA-2031 Compliant
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

ZXX-3200.1D, BAK02, CAP4DR

Weight:

21.10lbs

Internal SKU:

zxx32001d_bak02_cap4dr

Internal Product ID:

156471

Customer Ratings & Reviews



5 star
67%
4 star
23%
3 star
4%
2 star
7%
1 star
0%



Durability
4.7
Value
4.7
Features
4.5
Design
4.7
Usability
4.6

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

Good

The following review is for BAK02, which is a part of the bundle you are viewing.

This wire is very flexible and fit nicely in my 2000 nissan maxima. ring terminals were a little fussy, but that was operator error. very nice 150 amp fuse. Lots of wire crammed into it. Very inexpensive for the quality. I would recommend this to anyone looking for an upgrade.

By Blane on February 24, 2014

96

found this helpful.

Decent Amp Kit

The following review is for BAK02, which is a part of the bundle you are viewing.

I am a professional installer first of and my father is an electrician. Following the AWG- American Wire Gauge standards this is not 1/0 wire it's closer to 2AWG, please understand that true 1/0AWG copper wire will cost around $5-8 a foot.

That being said for the price it is an amazing kit but should be marketed as 2AWG.

When compare to Kicker and Memphis true to spec 1/0AWG wire there is a major difference in size and weigh over all. 5 feet of Memphis 1/0 Wire weigh the same as 17 feet of Belva 1/0AWG.

By josh on October 3, 2014

82

found this helpful.

Great

The following review is for BAK02, which is a part of the bundle you are viewing.

It is what it says it is.. no problems with install.

By PJ on September 17, 2013

78

found this helpful.

Great Wire

The following review is for BAK02, which is a part of the bundle you are viewing.

It's the size it says it is, and powers my 1400 watt system with no problems. For the price and ease of install, I couldn't be happier!

By Bay on May 18, 2014

77

found this helpful.

a great kit for the price

The following review is for BAK02, which is a part of the bundle you are viewing.

these are great for the money and would definitely buy again

By Joseph on February 6, 2014

77

found this helpful.

top quality

The following review is for BAK02, which is a part of the bundle you are viewing.

I got this kit on a deal with a amplifier I purchased thought it looked good turned out to be one of the best amp kits I have ever owned would of paid full price for it

By Drew on March 28, 2014

74

found this helpful.

Great deal

The following review is for BAK02, which is a part of the bundle you are viewing.

I got this kit because I got a deal on it with my amp...great starting kit...didn't have any problem with it when I installed it...The ground cable was to short for me but that is due to my custom box..All in all good 1/0 Guage kit

By Robert on August 8, 2014

73

found this helpful.

Huge

The following review is for BAK02, which is a part of the bundle you are viewing.

I have never ran 0 gauge before and when I got it and took it out I was surprised but the big wire didn't really hurt the install it is still hidden under the carpet and it's thick and flexible so it was easy to run through the firewall. Now I'm gonna get the Belva big 3

By Brennen on June 9, 2014

72

found this helpful.

True 0 AWG!

The following review is for BAK02, which is a part of the bundle you are viewing.

Pros:
This kit comes with everything you need for a 0 AWG amp install with RCA inputs.

Cons:
NONE

I would definitely recommend purchasing this kit if you need a quality 0 AWG kit at a fair price with super fast shipping!

By Michael on October 10, 2013

70

found this helpful.

good product

The following review is for BAK02, which is a part of the bundle you are viewing.

Good product, they give you plenty of length. Only complaint is that the o connectors are really hard to clamp down and the rcas are kinda cheesey but work

By Zach on September 12, 2013

68

found this helpful.

Add-ons


Similar Products


Best selling similar products

Alpine ILX-W650 with Backup Camera

• Double DIN Bluetooth Digital Multimedia Receiver
• 7" Capacitive Touchscreen Display Display
• Apple CarPlay and Android Auto Compatible
• 3 sets of 4 volts preamp outputs
• 9-Band Equalizer with Digital Time Correction
• SiriusXM Satellite Radio Ready
• Includes Backup Camera

(62)

$339.94

Alpine ILX-W650 Package with Backup Camera

• Premium Audio/Video (AV) System (No CD/DVD)
• Unique ultra-shallow installation
• Two-finger swipe user interface
• Works with Apple CarPlay® and Android Autoâ„¢
• Compatible with Google Assistant
• PowerStack Capability
• Built-in Bluetooth Hands-free

(80)

$324.95

Sony XAVAX8100 with Backup Camera

• Single DIN Bluetooth Digital Multimedia Receiver
• 9" Touchscreen Display Display
• Apple CarPlay and Android Auto Compatible
• 10-band graphic equalizer
• SiriusXM Satellite Radio Ready
• Includes Backup Camera

(9)

$517.99

Related Searches


ZXX-3200.1D, BAK02, CAP4DR small

Item added to your cart.

Price: $279.95

Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back