Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Car Audio & Electronics
  3. Car Amplifiers
  4. All Car Amplifiers

All Car Amplifiers

Filters
Kenwood ✕
Belva ✕
Like New & Used ✕
Clear Filters
Reset Done
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition
Like New & Used,

Shop the Category

filter-icon Filters & Sort

Belva BB5000Dv2 (BB5000D v2) (Like New (Open Box))

5000W Max (3000W RMS) Class-D Monoblock BB Series Car Amplifier

BB5000Dv2 big
Go to item page Right Arrow Icon of Right Arrow

Belva BB5000Dv2 (BB5000D v2) (Like New (Open Box))

5000W Max (3000W RMS) Class-D Monoblock BB Series Car Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $899.99 Details
$203.96

In stock

Only 1 Left!

Add to Cart

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

Belva BXA15001 (Open Box, Great)

1500W Peak BX-Series Class-AB Monoblock Car Amplifier with Bass Remote

BXA15001 big
Go to item page Right Arrow Icon of Right Arrow

Belva BXA15001 (Open Box, Great)

1500W Peak BX-Series Class-AB Monoblock Car Amplifier with Bass Remote

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

1
Was $149.95 Details
$65.99

In stock

Add to Cart

Belva BXA15001 (Like New (Open Box))

1500W Peak BX-Series Class-AB Monoblock Car Amplifier with Bass Remote

BXA15001 big
Go to item page Right Arrow Icon of Right Arrow

Belva BXA15001 (Like New (Open Box))

1500W Peak BX-Series Class-AB Monoblock Car Amplifier with Bass Remote

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock

shipping truck icon
Fast 2-day shipping to OH. Get it Thu, Nov. 20

empty

1
Was $149.95 Details
$46.74

In stock

Only 1 Left!

Add to Cart

Belva BXA15001 (Open Box, Good)

1500W Peak BX-Series Class-AB Monoblock Car Amplifier with Bass Remote

BXA15001 big
Go to item page Right Arrow Icon of Right Arrow

Belva BXA15001 (Open Box, Good)

1500W Peak BX-Series Class-AB Monoblock Car Amplifier with Bass Remote

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

1
Was $149.95 Details
$59.99

In stock

Only 2 Left!

Add to Cart

Belva BXA5002 (Like New (Open Box))

500W Peak BX-Series Class A/B 2-Channel Car Audio Amplifier with Bass Remote

BXA5002 big
Go to item page Right Arrow Icon of Right Arrow

Belva BXA5002 (Like New (Open Box))

500W Peak BX-Series Class A/B 2-Channel Car Audio Amplifier with Bass Remote

• 125 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Bridged: 500 watts x 1 channel @ 4 ohm
• Total Peak Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel-Channel

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $189.95 Details
$50.96

In stock

Only 1 Left!

Add to Cart

• 125 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Bridged: 500 watts x 1 channel @ 4 ohm
• Total Peak Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel-Channel

Belva BB200ABv2 (Like New (Open Box))

500W Peak Class A/B Monoblock Amplifier

BB200ABv2 big
Go to item page Right Arrow Icon of Right Arrow

Belva BB200ABv2 (Like New (Open Box))

500W Peak Class A/B Monoblock Amplifier

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $75.99 Details
$65.99

In stock

Only 1 Left!

Add to Cart

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

Belva BXD3K (Open Box, Great)

3000W Peak BX-Series Class-D Monoblock Car Audio Amplifier with Bass Remote

BXD3K big
Go to item page Right Arrow Icon of Right Arrow

Belva BXD3K (Open Box, Great)

3000W Peak BX-Series Class-D Monoblock Car Audio Amplifier with Bass Remote

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 3000 watts x 1 channel @ 1 ohm
• Total Peak Power: 3000 watts
• Class D 1 ohm Stable Monoblock

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

1
Was $139.95 Details
$69.99

In stock

Only 3 Left!

Add to Cart

Belva BXA5002 (Open Box, Good)

500W Peak BX-Series Class A/B 2-Channel Car Audio Amplifier with Bass Remote

BXA5002 big
Go to item page Right Arrow Icon of Right Arrow

Belva BXA5002 (Open Box, Good)

500W Peak BX-Series Class A/B 2-Channel Car Audio Amplifier with Bass Remote

• 125 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Bridged: 500 watts x 1 channel @ 4 ohm
• Total Peak Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel-Channel

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $189.95 Details
$59.99

In stock

Only 1 Left!

Add to Cart

• 125 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Bridged: 500 watts x 1 channel @ 4 ohm
• Total Peak Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel-Channel

Belva BB200ABv2 (Open Box, Great)

500W Peak Class A/B Monoblock Amplifier

BB200ABv2 big
Go to item page Right Arrow Icon of Right Arrow

Belva BB200ABv2 (Open Box, Great)

500W Peak Class A/B Monoblock Amplifier

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $75.99 Details
$69.99

In stock

Only 2 Left!

Add to Cart

Belva BB200ABv2 (Open Box, Good)

500W Peak Class A/B Monoblock Amplifier

BB200ABv2 big
Go to item page Right Arrow Icon of Right Arrow

Belva BB200ABv2 (Open Box, Good)

500W Peak Class A/B Monoblock Amplifier

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $75.99 Details
$65.99

In stock

Add to Cart

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

Lowest price in 30 days

Kenwood eXcelon X803-5 (Open Box, Great)

1600W Peak (800W RMS) Class D eXcelon Series 5 Channel Car Amplifier with Bass Remote

X803-5 big
Go to item page Right Arrow Icon of Right Arrow

Kenwood eXcelon X803-5 (Open Box, Great)

1600W Peak (800W RMS) Class D eXcelon Series 5 Channel Car Amplifier with Bass Remote

• 50 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 5-Channel-Channel Amplifier

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

1
Was $600.00 Details
$349.99

In stock

Add to Cart

• 50 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 5-Channel-Channel Amplifier

Kenwood eXcelon XR1001-1 - New (Damaged Packaging, Product A+)

2000W Max (1000W RMS) XR Series 2-ohm Stable Class-D Monoblock Amplifier w/ Bass Knob Included

XR1001-1 big
Go to item page Right Arrow Icon of Right Arrow

Kenwood eXcelon XR1001-1 - New (Damaged Packaging, Product A+)

2000W Max (1000W RMS) XR Series 2-ohm Stable Class-D Monoblock Amplifier w/ Bass Knob Included

• 500 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2000 Watts
• CEA-2006 Compliant
• Bass Knob Included
• Aluminum Heatsink
• Dimensions: 12-5/8" W x 6-5/8" L x 2" H

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

1
Was $700.00 Details
$664.99

In stock

Add to Cart

Belva BXA6404 (Open Box, Great)

640W Peak BX-Series Class A/B 4-Channel Car Audio Amplifier

BXA6404 big
Go to item page Right Arrow Icon of Right Arrow

Belva BXA6404 (Open Box, Great)

640W Peak BX-Series Class A/B 4-Channel Car Audio Amplifier

• 80 watts x 4 channel @ 4 ohm
• 160 watts x 4 channel @ 2 ohm
• Bridged: 320 watts x 2 channel @ 4 ohm
• Total Peak Power: 640 watts
• Class A/B 2 ohm Stable 4-Channel-Channel

shipping truck icon
FREE 2-day shipping to OH. Get it Thu, Nov. 20

empty

Was $199.99 Details
$59.99

In stock

Only 1 Left!

Add to Cart
 
    Clear all

    FAQ Frequently asked questions in All Car Amplifiers

    A car amplifier is an electronic device designed to increase the power of audio signals sent to speakers. It plays a crucial role in enhancing the sound quality of your car audio system by providing additional power to drive the speakers effectively. When you add a car amplifier to your audio setup, you'll experience clearer sound, improved bass response, and overall better audio performance. Whether you're a music enthusiast or simply want to enjoy high-quality audio during your commute, a car amplifier is essential to achieving the best sound experience in your vehicle.
    Selecting the right car amplifier requires considering several factors. Firstly, determine the power requirements of your speakers and subwoofers to match them with an amplifier that provides adequate wattage. Consider the number of channels you need based on your speaker configuration (e.g., 2-channel for front speakers and a separate subwoofer channel). Pay attention to the amplifier's size and compatibility with your vehicle's space limitations. Also, look for features like high-level inputs, built-in crossovers, and adjustable gain controls for fine-tuning your audio output. Consulting with an expert or using online tools, like Sonic Electronix's AmpliFinder, can help you find the perfect match for your car audio needs.
    The ability to install a car amplifier yourself depends on your level of technical expertise and experience with car audio systems. While some enthusiasts with prior knowledge may successfully complete the installation, it's often recommended to seek professional installation for the best results. Professional installers have the expertise to ensure proper wiring, grounding, and secure mounting to prevent any potential damage to your vehicle. They can also optimize the amplifier settings to achieve the best sound quality and prevent any interference or noise issues. Professional installation ensures a safe and reliable setup, providing peace of mind and preserving your car's warranty.
    Yes, most multi-channel car amplifiers can be bridged to combine two channels into one, effectively doubling the power output to a single speaker or subwoofer. Bridging is beneficial in situations where you want to power a high-powered subwoofer with increased wattage. By bridging channels, you can achieve a mono output that drives the subwoofer with more power, resulting in stronger and deeper bass response. However, when bridging, it's crucial to follow the amplifier's guidelines and use the correct impedance load to avoid damaging the amplifier or speakers.
    In general, a car amplifier is not a significant drain on your car's battery when the vehicle is running. However, if you leave the amplifier powered on while the engine is off, it can slowly draw power from the battery, which may eventually lead to a dead battery if left unattended for an extended period. To prevent this, ensure that the amplifier is wired properly to a switched power source that turns off when the car is not in use. Additionally, using a high-quality car battery and monitoring its health regularly will help maintain optimum power delivery and prevent any issues related to battery drainage.

    All About All Car Amplifiers

    Finding The Right Amplifier For Your Car

    This category contains all of our car amps and you can use our guided browsing tools to find the exact wattage, number of channels or other features you care about.

    Mini amplifiers, marine amplifiers, amplifier packages & bundles, plus other audio accessories like amplifier installation equipment, equalizers, and processors are all available from Sonic Electronix to complete your vehicle's audio system. Browse high-quality amplifiers from industry leaders including NVX, JL Audio, Rockford Fosgate, Kicker, Alpine, Belva and more.

    ADVERTISEMENT
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage

    Add vehicle
    2 | Make
    3 | Model
    Where to find vehicle info | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    2 | Make
    3 | Model
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner’s manual
    • Vehicle’s insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver’s side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo