All Alpine Car Amplifiers at Sonic Electronix

All Alpine Car Amplifiers

Some of the best and most affordable car amplifiers on the market are produced by Alpine.
Filters
Loading...
Filters

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
The lowest impedance the amplifier will handle when it is not bridged.
The lowest impedance the amplifier will handle when it is bridged.
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
listview icon
gridview icon
Alpine MRV-M500

500W V-Power Series Class D Monoblock Digital Amplifier

SALE MRV-M500 main
Go to item page

500W V-Power Series Class D Monoblock Digital Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

28
Alpine MRV-M500

500W V-Power Series Class D Monoblock Digital Amplifier

In stock

$230.00 (17.41% off)
$189.95
Hide info
More info Item page
3 Special offers
  • Save 50% on a Universal Wetsounds Remote Controller
  • 50% Off NVX Universal Bluetooth Controller with Purchase!
  • 50% Off a 4 Gauge Installation Kit with Purchase!

Item Added to Cart

MRV-M500 small

500W V-Power Series Class D Monoblock Digital Amplifier

$189.95

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$249.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine MRV-M500.
Alpine BBX-T600

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

SALE BBX-T600 main
Go to item page

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

• 50 Watts RMS x 2 @ 4 ohms
• 70 Watts RMS x 2 @ 2 ohms
• 130 Watts RMS x 1 @ 4 ohms
• Total Peak Power: 600 Watts
• High and Low Pass Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.84" W x 9.44" L x 2" H

Alpine BBX-T600

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

In stock

$180.00 (33.36% off)
$119.95
Hide info
More info Item page
1 Special offer
  • FREE 4 Gauge Amp Kit with Purchase!

Item Added to Cart

BBX-T600 small

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

$119.95

Keep Shopping

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42BK Complete 4 Gauge Amplifier Wiring Kit

$54.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine BBX-T600.
Alpine BBX-F1200

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

BBX-F1200 main
Go to item page

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

• 50 Watts RMS x 4 @ 4 ohms
• 70 Watts RMS x 4 @ 2 ohms
• 130 Watts RMS x 2 @ 4 ohms
• Total Peak Power: 600 Watts
• High and Low Pass Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.4" W x 12.9" L x 2" H

6
Alpine BBX-F1200

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

In stock

$220.00 (13.66% off)
$189.95
Hide info
More info Item page
1 Special offer
  • Save 50% off a Belva 4-Channel Amp Kit with Purchase!

Item Added to Cart

BBX-F1200 small

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

$189.95

Keep Shopping

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$39.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine BBX-F1200.
Alpine S-A60M

S-Series Monoblock Class-D Amplifier (600W RMS)

S-A60M main
Go to item page

S-Series Monoblock Class-D Amplifier (600W RMS)

• Alpine S-Series Mono Power Amplifier - S-A60M
• 400W RMS x 1 (4ohm, 14.4V < 1% THD+N)
• 600W RMS x 1 (2ohm, 14.4V < 1% THD+N)
• Remote bass knob compatible

3
Alpine S-A60M

S-Series Monoblock Class-D Amplifier (600W RMS)

In stock

$280.00 (28.59% off)
$199.95
Hide info
More info Item page
2 Special offers
  • Get A Free $25 Dollar Gift Card With Purchase!
  • 50% Off a 4 Gauge Installation Kit with Purchase!

Item Added to Cart

S-A60M small

S-Series Monoblock Class-D Amplifier (600W RMS)

$199.95

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$249.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine S-A60M.
Alpine KTA-30MW

Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier

KTA-30MW main
Go to item page

Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier

• Class D Monoblock Weather Resistant Power Pack Amplifier
• Power Handling: 300W RMS x 1
• IP66 Weather Resistant Rating
• Dynamic Peak Power (DPP)
• Frequency Response: 20-400 Hz

Alpine KTA-30MW

Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier

Available

Ships in 1-2 weeks

$400.00 (7.51% off)
$369.95

Item Added to Cart

KTA-30MW small

Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier

$369.95

Keep Shopping

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$249.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine KTA-30MW.
Alpine BBX-T600 Amplifier + Free 4 Gauge Amp Kit

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

BBX-T600, bak42 main
Go to item page

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

• 50 Watts RMS x 2 @ 4 ohms
• 70 Watts RMS x 2 @ 2 ohms
• 130 Watts RMS x 1 @ 4 ohms
• Total Peak Power: 600 Watts
• High and Low Pass Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.84" W x 9.44" L x 2" H

136
Alpine BBX-T600 Amplifier + Free 4 Gauge Amp Kit

600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier

In stock

$229.99 (47.83% off)
$119.99
Alpine MRV-F300

300W 4-Channel Class D V-Power Series Compact Car Amplifier

MRV-F300 main
Go to item page

300W 4-Channel Class D V-Power Series Compact Car Amplifier

• RMS Power: 50W x 4-Chan. @ 4 ohms, 75W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Same Power in a 40% Smaller Chassis

15
Alpine MRV-F300

300W 4-Channel Class D V-Power Series Compact Car Amplifier

In stock

$280.00 (35.73% off)
$179.95
Hide info
More info Item page
2 Special offers
  • Save 20% off a 8-pack 8 gauge ferrule with heat shrink
  • Save 25% on an 8 Gauge Amp Kit with Purchase!

Item Added to Cart

MRV-F300 small

300W 4-Channel Class D V-Power Series Compact Car Amplifier

$179.95

Keep Shopping

Belva BAK84

Complete 8 Gauge Amplifier Wiring Kit with 4-Channel RCA Interconnects

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine MRV-F300.
Alpine PDX-V9

1600W Max, 5-Channel PDX Series Car Amplifier

PDX-V9 main
Go to item page

1600W Max, 5-Channel PDX Series Car Amplifier

• Full-Range RMS: 100W x 4 @ 4 ohms, 100W x 4 @ 2 ohms
• Subwoofer RMS: 500W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

10
Alpine PDX-V9

1600W Max, 5-Channel PDX Series Car Amplifier

In stock

 
$999.95
Hide info
More info Item page
3 Special offers
  • Get A Free $150 Dollar Gift Card With Purchase!
  • Get 25% Off an SMD CC-1 with Select Amplifiers
  • Get 25% Off DD-1 Distortion Detector!

Item Added to Cart

PDX-V9 small

1600W Max, 5-Channel PDX Series Car Amplifier

$999.95

Keep Shopping

Belva BAK46 6-Channel 4 Gauge Amplifier Installation Kit

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
AudioControl LC6i (Black)

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

$149.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine PDX-V9.
Alpine KTA-200M

200 watts RMS Class D Monoblock Subwoofer Amplifier

SALE KTA-200M main
Go to item page

200 watts RMS Class D Monoblock Subwoofer Amplifier

• Powerstack Capable
• Class D
• CTA-2006 Compliant
• fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver
• 100W x 1 RMS
• 200W x 1 RMS
• 400W x 1 DPP

Alpine KTA-200M

200 watts RMS Class D Monoblock Subwoofer Amplifier

In stock

$299.95 (33.34% off)
$199.95

Item Added to Cart

KTA-200M small

200 watts RMS Class D Monoblock Subwoofer Amplifier

$199.95

Keep Shopping

NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$249.99

Add
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine KTA-200M.
Alpine R-A90S

R Series 6/5/4/3 Channel Power Amplifier

R-A90S main
Go to item page

R Series 6/5/4/3 Channel Power Amplifier

• Class D Amplifier
• CTA-2006 Compliant

Alpine R-A90S

R Series 6/5/4/3 Channel Power Amplifier

In stock

 
$599.95

Item Added to Cart

R-A90S small

R Series 6/5/4/3 Channel Power Amplifier

$599.95

Keep Shopping

Stinger SI4612 4000 Series Interconnect Cable

12 ft. 6-Channel 4000 Series Audio Interconnect Cable

$19.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$29.99

Add
Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

$49.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine R-A90S.
Alpine MRV-M500 + Free Belva Amp Kit

Alpine MRV-M500 500 Watt RMS Class "D" Mono Car Amplifier + Amp Kit

BAK82,MRV-M500 main
Go to item page

Alpine MRV-M500 500 Watt RMS Class "D" Mono Car Amplifier + Amp Kit

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

58
Alpine MRV-M500 + Free Belva Amp Kit

Alpine MRV-M500 500 Watt RMS Class "D" Mono Car Amplifier + Amp Kit

In stock

$279.99 (30.37% off)
$194.95
Alpine X-A90M

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier

X-A90M main
Go to item page

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier

• 600 Watts RMS x 4 @ 4 ohms
• 900 Watts RMS x 4 @ 2 ohms
• CEA-2006 Compliant
• Low Pass and High Pass Filters
• 0 - 12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 11-3/4" W x 7-5/8" L x 2" H

2
Alpine X-A90M

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier

In stock

Only 1 Left!

 
$749.95
Hide info
More info Item page
5 Special offers
  • Get A Free $100 Dollar Gift Card With Purchase!
  • Receive 10% off the Alpine XW12D4 wit your purchase!
  • Get 25% Off DD-1 Distortion Detector!
  • Save 50% off True 4 Gauge Wiring Kit with Select Amps
  • 50% Off XCAP1F 1.0 Farad Capacitor with Amplifier Purchase

Item Added to Cart

X-A90M small

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier

$749.95

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$249.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine X-A90M.
Alpine PDX-M6

600W RMS PDX Series Monoblock Class-D Digital Car Amplifier

PDX-M6 main
Go to item page

600W RMS PDX Series Monoblock Class-D Digital Car Amplifier

• RMS: 600W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Total RMS Power: 600W
• CEA-2006 Compliant
• 6-Layer Glass Epoxy PC Board and Compact Size
• Thermal Protection Circuitry
• Dimensions: 7-9/16"D x 10-1/8"W x 2"H

40
Alpine PDX-M6

600W RMS PDX Series Monoblock Class-D Digital Car Amplifier

In stock

Only 1 Left!

$650.00 (0.01% off)
$649.95

Item Added to Cart

PDX-M6 small

600W RMS PDX Series Monoblock Class-D Digital Car Amplifier

$649.95

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine PDX-M6.
Alpine X-A90V

900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier

X-A90V main
Go to item page

900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier

• 600 Watts RMS x 5 @ 4 ohms (75W x 4, 300W x 1)
• 900 Watts RMS x 5 @ 2 ohms (100W x 4, 500W x 1)
• 900 Watts RMS x 5 @ 4 ohms, Bridged (200W x 2, 500W x 1)
• CEA-2006 Compliant
• Low Pass, High Pass and Subsonic Filters
• 0 - 12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 11-3/4" W x 7-5/8" L x 2" H

1
Alpine X-A90V

900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier

In stock

Only 2 Left!

 
$899.95
Hide info
More info Item page
4 Special offers
  • Get A Free $50 Gift Card With Purchase!
  • Get 25% Off an SMD CC-1 with Select Amplifiers
  • Get 25% Off DD-1 Distortion Detector!
  • FREE 4 Gauge 5/6 Channel Wiring Kit with Select Amps!

Item Added to Cart

X-A90V small

900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier

$899.95

Keep Shopping

NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$34.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$29.99

Add
Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

$49.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine X-A90V.
Alpine KTA-30FW

600W Max (300W RMS) KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier

KTA-30FW main
Go to item page

600W Max (300W RMS) KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier

• 75 Watts RMS x 4 @ 4 ohms
• 75 Watts RMS x 4 @ 2 ohms
• Total Peak Power: 600 Watts
• CEA-2006 Compliant
• Input/Output/Power Harness Included
• IP66 Weatherproof Rating

Alpine KTA-30FW

600W Max (300W RMS) KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier

Special order

Ships at Later Date

$400.00 (7.51% off)
$369.95
Hide info
More info Item page
1 Special offer
  • Get A Free $50 Gift Card With Purchase!

Item Added to Cart

KTA-30FW small

600W Max (300W RMS) KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier

$369.95

Keep Shopping

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add
NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$23.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine KTA-30FW.
Alpine MRV-F300 + Free Belva 8 Gauge Amplifier Kit

300W 4-Channel Class D V-Power Series Compact Car Amplifier

MRV-F300, BAK84 main
Go to item page

300W 4-Channel Class D V-Power Series Compact Car Amplifier

• RMS Power: 50W x 4-Chan. @ 4 ohms, 75W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Same Power in a 40% Smaller Chassis

30
Alpine MRV-F300 + Free Belva 8 Gauge Amplifier Kit

300W 4-Channel Class D V-Power Series Compact Car Amplifier

In stock

$329.99 (43.10% off)
$187.75

Item Added to Cart

MRV-F300, BAK84 small

300W 4-Channel Class D V-Power Series Compact Car Amplifier

$187.75

Keep Shopping

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add
NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$19.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine MRV-F300 + Free Belva 8 Gauge Amplifier Kit.
Alpine KCX-F200INT

Premium Audio System Interface for the X409-WRA-JL 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator System

KCX-F200INT main
Go to item page

Premium Audio System Interface for the X409-WRA-JL 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator System

• Retains the Alpine OEM Premium Amplifier in the NEW 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator
• Plug-and-Play installation with the X409-WRA-JL 9” Weather-Resistant Navigation System with Off-Road Mode
• Compact size for hidden installation

Alpine KCX-F200INT

Premium Audio System Interface for the X409-WRA-JL 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator System

In stock

Only 2 Left!

 
$149.95
Alpine KTA-200M + Alpine SBT-S10V SWT 10" Loaded Ported Subwoofer Package

200 watts RMS Class D Monoblock Subwoofer Amplifier + 10" Loaded Ported Subwoofer Enclosure

KTA-200M, SBT-S10V main
Go to item page

200 watts RMS Class D Monoblock Subwoofer Amplifier + 10" Loaded Ported Subwoofer Enclosure

• Alpine Power Stack Bass 10" Loaded Ported Subwoofer Package
• Powerstack Capable
• Class D
• CTA-2006 Compliant • 10" Single 2 Ohm SWT Series Subwoofer
• RMS: 350 Watts , Peak: 1000 Watts
• Frequency Response: 28-200 Hz
• Square Port Style
• Dimensions: 7"D x 22"W x 16"H

Alpine KTA-200M + Alpine SBT-S10V SWT 10" Loaded Ported Subwoofer Package

200 watts RMS Class D Monoblock Subwoofer Amplifier + 10" Loaded Ported Subwoofer Enclosure

In stock

Only 3 Left!

$599.95 (29.18% off)
$424.90

Item Added to Cart

KTA-200M, SBT-S10V small

200 watts RMS Class D Monoblock Subwoofer Amplifier + 10" Loaded Ported Subwoofer Enclosure

$424.90

Keep Shopping

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$109.99

Add
Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

$49.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine KTA-200M + Alpine SBT-S10V SWT 10" Loaded Ported Subwoofer Package.
Alpine BBX-F1200 Amplifier + (2-Pairs) Rockford 6.5" Speakers + Amp Kit

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

BBX-F1200, R165SX2, BAK44 main
Go to item page

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

• 50 Watts RMS x 4 @ 4 ohms
• 70 Watts RMS x 4 @ 2 ohms
• 130 Watts RMS x 2 @ 4 ohms
• Total Peak Power: 600 Watts
• High and Low Pass Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.4" W x 12.9" L x 2" H

70
Alpine BBX-F1200 Amplifier + (2-Pairs) Rockford 6.5" Speakers + Amp Kit

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

In stock

$535.95 (28.37% off)
$383.92

Item Added to Cart

BBX-F1200, R165SX2, BAK44 small

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

$383.92

Keep Shopping

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$39.99

Add
Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

$19.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Alpine BBX-F1200 Amplifier + (2-Pairs) Rockford 6.5" Speakers + Amp Kit.
Alpine X-A90M Amplifier + Free High Quality NVX Amp Kit

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier + NVX XKIT42

X-A90M, XKIT42 main
Go to item page

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier + NVX XKIT42

• 600 Watts RMS x 4 @ 4 ohms
• 900 Watts RMS x 4 @ 2 ohms
• CEA-2006 Compliant
• Low Pass and High Pass Filters
• 0 - 12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 11-3/4" W x 7-5/8" L x 2" H

80
Alpine X-A90M Amplifier + Free High Quality NVX Amp Kit

900 W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier + NVX XKIT42

In stock

Only 1 Left!

$764.99 (0.66% off)
$759.95

Items per page: 20 50 100

Related Categories


Alpine EQs, Signal & Sound Processors Alpine EQs, Signal & Sound Processors

Find a quality line output converter, digital sound processor, EQ, crossover or bass enhancer in here.

Alpine All Car Amplifiers Information

All car amplifiers from Alpine are built from highly durable materials and with quality in mind. With various power ratings and max power output, Alpine has a wide array of options to suit your system. When thinking of car amplifiers, think Alpine.
    clear all items