Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Car Audio & Electronics
  3. Car Speakers
  4. All Car Speakers

All Car Speakers for your 2021 TrailBlazer close

Exclamation Icon It’s a no-brainer.
 Get your speakers here.

Install kit discounts · Guaranteed fit · Full warranty
Filters
Reset Done
Show products that do not fit
Product Type
Price Range
Speaker Location
Product Fitment Type
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition
Availability

Your Vehicle

close
Checkmark Icon
Fits select locations in your 2021 TrailBlazer
Add vehicle details to confirm exact location or Update vehicle.
Update vehicle | Remove vehicle | Vehicle store

Shop the Category

filter-icon Filters & Sort
Limited time!

Rockford Fosgate Prime R152-S

160W Peak (80W RMS) 5.25" Prime Series 2 Way Component 4-ohm Speakers

R152-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Prime R152-S

160W Peak (80W RMS) 5.25" Prime Series 2 Way Component 4-ohm Speakers

• 80 watts Peak Each, 40 watts RMS Each
• 1" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB

Free Speaker Accessory at Checkout!
install icon

Free or discounted install kits when available.

Fits select models only.
Add details to confirm fitment.
26
$79.99 /set
Notify Me

• 80 watts Peak Each, 40 watts RMS Each
• 1" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB

Limited time!

Rockford Fosgate Punch P1 P152-S

200W Peak (100W RMS) 5.52" Punch Series 2 Way Component 4-ohm Speaker System

P152-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch P1 P152-S

200W Peak (100W RMS) 5.52" Punch Series 2 Way Component 4-ohm Speaker System

• 100 watts Peak Each, 50 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB

Free Speaker Accessory at Checkout!
VIP Star Icon

VIP Product Get $16.00 in rewards to spend later

install icon

Free or discounted install kits when available.

Fits select models only.
Add details to confirm fitment.
16
$159.99 /set
Add to Cart

• 100 watts Peak Each, 50 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB

NVX - Worth the Envy - Direct to Consumer Car Audio

Kicker CSC67 (46CSC674) (Open Box, Great)

600W Peak (200W RMS) 6.75” CS Series 2 Way Coaxial 4-ohm Speakers

46CSC674 big
Go to item page Right Arrow Icon of Right Arrow

Kicker CSC67 (46CSC674) (Open Box, Great)

600W Peak (200W RMS) 6.75” CS Series 2 Way Coaxial 4-ohm Speakers

• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB

shipping truck icon Free shipping in USA. Provide zip for delivery date.
install icon

Install kits available for most vehicles

found car based on your search
Fits multiple locations in your TrailBlazer
  • Front Door
  • Rear Door
26
List price $119.99
-42% $69.99 /pair

In stock

Only 1 Left!

Add to Cart

• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB

Limited time!

Kenwood eXcelon KFC-X135

320W Peak (80W RMS) 5.25" eXcelon Series 2 Way Coaxial 4-ohm Car Speakers

KFC-X135 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Kenwood eXcelon KFC-X135

320W Peak (80W RMS) 5.25" eXcelon Series 2 Way Coaxial 4-ohm Car Speakers

• 160 watts Peak Each, 40 watts RMS Each
• 1" Soft Dome Tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB

VIP Star Icon

VIP Product Get $11.15 in rewards to spend later

install icon

Free or discounted install kits when available.

Fits select models only.
Add details to confirm fitment.
List price $180.00
Save $68.50
-38% $111.50 /pair
Add to Cart

• 160 watts Peak Each, 40 watts RMS Each
• 1" Soft Dome Tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB

Rockford Fosgate Punch P1675-S (Open Box, Great)

240W Peak (120W RMS) 6.75" Punch Series 2-way 4-ohm Component Speaker System

P1675-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch P1675-S (Open Box, Great)

240W Peak (120W RMS) 6.75" Punch Series 2-way 4-ohm Component Speaker System

• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome tweeters
• Injection molded Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

install icon

Install kits available for most vehicles

found car based on your search
Fits multiple locations in your TrailBlazer
  • Front Door
  • Rear Door
20
List price $159.99
-15% $135.99 /set
Notify Me

• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome tweeters
• Injection molded Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

Rockford Fosgate PRIME R1675-S (Open Box, Great)

160W Peak (80W RMS) 6.75” Prime Series 2-way 4-ohm Component Car Speakers

R1675-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate PRIME R1675-S (Open Box, Great)

160W Peak (80W RMS) 6.75” Prime Series 2-way 4-ohm Component Car Speakers

• 80 watts Peak Each, 40 watts RMS Each
• 1/2" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

install icon

Install kits available for most vehicles

found car based on your search
Fits multiple locations in your TrailBlazer
  • Front Door
  • Rear Door
16
List price $79.99
-15% $67.99 /set
Notify Me

• 80 watts Peak Each, 40 watts RMS Each
• 1/2" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

Rockford Fosgate Punch P152-S (Open Box, Great)

200W Peak (100W RMS) 5.52" Punch Series 2-way 4-ohm Component Speaker System

P152-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch P152-S (Open Box, Great)

200W Peak (100W RMS) 5.52" Punch Series 2-way 4-ohm Component Speaker System

• 100 watts Peak Each, 50 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB

install icon

Free or discounted install kits when available.

Fits select models only.
Add details to confirm fitment.
13
List price $159.99
-15% $135.99 /set
Add to Cart

• 100 watts Peak Each, 50 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB

Rockford Fosgate PRIME R152-S (Open Box, Great)

160W Peak (80W RMS) 5.25" Prime Series 2-way 4-ohm Component Speaker System

R152-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate PRIME R152-S (Open Box, Great)

160W Peak (80W RMS) 5.25" Prime Series 2-way 4-ohm Component Speaker System

• 80 watts Peak Each, 40 watts RMS Each
• 1" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB

install icon

Free or discounted install kits when available.

Fits select models only.
Add details to confirm fitment.
26
List price $79.99
-15% $67.99 /set
Notify Me

• 80 watts Peak Each, 40 watts RMS Each
• 1" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB

Limited time!

Kenwood KFC-ST01

320W Peak (80W RMS) 1" KFC Series PEI Balanced Dome Car Tweeters

KFC-ST01 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Kenwood KFC-ST01

320W Peak (80W RMS) 1" KFC Series PEI Balanced Dome Car Tweeters

• 13/16" KFC Series Balanced Dome Tweeters
• 160 watts Peak Each
• 40 watts RMS Each
• 4 ohm Impedance

install icon

Install kits available for most vehicles

Fits select models only.
Add details to confirm fitment.
18
List price $95.00
Save 38%
-38% $59.00 /pair
Notify Me

• 13/16" KFC Series Balanced Dome Tweeters
• 160 watts Peak Each
• 40 watts RMS Each
• 4 ohm Impedance

Pioneer TS-X210

200W Peak (100W RMS) 5.25" 3-way 4-ohm Surface Mount Coaxial Car Speakers

TS-X210 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Pioneer TS-X210

200W Peak (100W RMS) 5.25" 3-way 4-ohm Surface Mount Coaxial Car Speakers

• 100 watts Peak Each, 25 watts RMS Each
• 3/4" Piezo Dome tweeters
• Carbon Fiber Reinforced IMPP woofer cone material
• Cellulose fiber midrange cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB

VIP Star Icon

VIP Product Get $16.00 in rewards to spend later

install icon

Install kits available for most vehicles

Universal Icon
Universal – fits most vehicles.
Shop similar products or Update vehicle
25
List price $190.00
-16% $159.99 /pair
Add to Cart

• 100 watts Peak Each, 25 watts RMS Each
• 3/4" Piezo Dome tweeters
• Carbon Fiber Reinforced IMPP woofer cone material
• Cellulose fiber midrange cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB

Pioneer TS-A301TW

900W Peak (200W RMS) 3/4" A Series PEI Hard Dome Component Tweeters

TS-A301TW big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Pioneer TS-A301TW

900W Peak (200W RMS) 3/4" A Series PEI Hard Dome Component Tweeters

• 3/4" A Series Hard Dome Tweeters
• 450 watts Peak Each
• 100 watts RMS Each
• 4 ohm Impedance

install icon

Install kits available for most vehicles

Universal Icon
Universal – fits most vehicles.
Shop similar products or Update vehicle
1
List price $65.00
-15% $55.00 /pair
Add to Cart

• 3/4" A Series Hard Dome Tweeters
• 450 watts Peak Each
• 100 watts RMS Each
• 4 ohm Impedance

NVX - Worth the Envy - Direct to Consumer Car Audio
Prev 7 8 9 10 11

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in All Car Speakers

    Car Speakers Frequently Asked Questions (FAQ)
    Coaxial car speakers, also known as full-range speakers, combine multiple speaker elements in one unit. These elements typically include a woofer for low frequencies and a tweeter for high frequencies. Some coaxial speakers may also have a mid-range driver for enhanced sound quality. The key advantage of coaxial speakers is their simplicity and ease of installation, as all components are housed in a single unit, making them a popular choice for stock speaker replacements. In contrast, component speakers consist of separate speaker elements—woofers, tweeters, and sometimes mid-range drivers—allowing for greater customization and sound quality. Component systems offer better sound separation and imaging, making them a preferred choice for audiophiles and those seeking high-quality audio in their vehicles.
    Speaker sensitivity, measured in decibels (dB), indicates how efficiently a speaker converts power into sound. Higher sensitivity speakers produce more sound with less power, making them suitable for low-powered factory stereos or aftermarket head units. Lower sensitivity speakers may require more power to achieve the same volume level. When choosing car speakers, it's essential to consider sensitivity to match your stereo's power output. If you have a low-powered system, opt for high-sensitivity speakers to maximize sound output without distortion. Conversely, higher-powered aftermarket amplifiers can work well with lower sensitivity speakers. Balancing speaker sensitivity with your system's power output is crucial to achieving optimal audio quality and avoiding distortion.
    Speaker impedance, measured in ohms (Ω), represents the electrical resistance a speaker presents to an amplifier. Car speakers typically come in 4-ohm and 8-ohm versions, with 4-ohm being the most common. The speaker's impedance affects the amount of power it draws from the amplifier. In car audio systems, it's essential to match the speaker's impedance with the amplifier's minimum recommended load. Amplifiers are designed to work most efficiently within specific impedance ranges, and a mismatch can result in reduced power output and potential damage to the amplifier or speakers. Most car audio amplifiers are optimized for 4-ohm speakers, so choosing 4-ohm speakers is generally a safe choice. However, if you're connecting multiple speakers, it's crucial to calculate the total impedance to avoid overloading the amplifier.
    Upgrading factory car speakers with aftermarket speakers offers several advantages: Improved Sound Quality: Aftermarket speakers often feature better materials, construction, and design, resulting in clearer, more detailed sound. Enhanced Bass: Upgraded speakers typically provide deeper and more pronounced bass response. Greater Power Handling: Aftermarket speakers can handle more power, reducing the risk of distortion at higher volumes. Customization: Aftermarket speakers offer a wide range of sizes, styles, and features, allowing you to tailor your sound system to your preferences. Durability: Many aftermarket speakers are built to withstand the harsh conditions of automotive use, increasing their longevity. Overall, upgrading car speakers can transform your in-car audio experience, delivering higher fidelity and more enjoyable sound.
    2-way and 3-way car speakers differ in the number of driver elements they incorporate. A 2-way speaker consists of a woofer for low frequencies and a tweeter for high frequencies, while a 3-way speaker adds a mid-range driver for improved sound separation. The choice between 2-way and 3-way speakers depends on your audio priorities and budget. 2-way speakers are cost-effective and suitable for most users, providing good sound quality and clarity. They are ideal for replacing factory speakers or upgrading basic audio systems. 3-way speakers offer enhanced sound separation and improved mid-range performance. If you seek more detailed and balanced audio with better instrument and vocal reproduction, 3-way speakers are a worthy upgrade. However, they tend to be pricier than 2-way speakers. Ultimately, your choice should align with your audio preferences and budget, as both 2-way and 3-way speakers can significantly enhance your car's audio system compared to factory-installed speakers.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2021 Chevrolet TrailBlazer

    2016 Mercedes-Benz Sprinter Cargo

    2013 Ram 2500

    2018 Lexus RC350

    2020 Subaru Ascent

    1989 GMC R2500 Pickup

    2006 Acura TL

    2010 Pontiac Vibe

    1989 Mazda 626

    1988 Audi 5000 Quattro

    Vehicle
    Store     Delete

    2018 Polaris Ranger EV

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2021 TrailBlazer
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo