Marine Lighting

• 3 music modes : LED lighting reacts with the beat of the music
• Controller can be connected to a marine receiver or smartphone
• 5 pre-programmed color changing modes
• Can power up to 10 meters of LED lighting per controller
• Choose your favorite single color to match your boat
• Built-in dimmer control
• Remembers last mode when turned off and on
• Range: 20-30 meters
• Wireless frequency: 433.92 mHz
• Ooutput: 2 channels (RGB)
• 12-volt, 7.5A input

• Blue LED Accent Lighting
• Injection Molded Acrylic Ring
• LEDs operate off of standard 12v Power
• Compatible with Wet Sounds 65 & 650 Series Speakers

• Input Voltage: 10-30V DC
• Wattage: 240 W (80-3W CREE LEDs)
• Raw Lumens: 19200
• LUX at 10M: 780
• Color Temperature: 6000K
• Combo/Flood 90 degrees
• Spot 8 degrees

• Input Voltage: 10-30V DC
• Wattage: 12W (4-3W CREE LEDs)
• Raw Lumens: 960
• Color Temperature: 6000K
• Beam Pattern: 90 deg Flood

• Input Voltage: 10-30V DC
• Wattage: 180 W (60-3W CREE LEDs)
• Raw Lumens: 14400
• LUX at 10M: 625
•Color Temperature: 6000K

• Wattage: 60 Watt High Beam – 40 Watt Low Beam
• 2800LM Low Beam – Draws 2.9a at 13.8v
• 3450LM High Beam – Draws 4.3a at 13.8v
• LED Color: 6500k
• Lens: polycarbonate
• Housing: Die-cast aluminum

• Fits most Harley Davidson®
• Stainless steel mount
• H4 style plug pre-wired harness
• Accepts 5.75" (5.6") headlight
• Includes retaining ring

• Operates off of standard 12 volt power
• Compatible with Wet Sounds RF-RGB-MC V2 RF controller
• Flexible for custom installs
• Color: Red, Green or Blue

• 3" x 3.25" Driving Light
• 4 LED CREE Spotlights
• Aluminum Housing with PMMA Lens
• 90° Beam Pattern
• Adjustable Stainless Steel Mounting Bracket

• Dynamic Modes 20
•Static Colors 20
•Direct Preset Colors 7
•Brightness Levels 8
•Dynamic Speed Levels 10

• Expertly crafted from premium materials
• Designed to match rigorous quality standards
• Compatible with HD factory alarm
• Compatible with HD factory alarm
• Stops hyper flashing when adding LED turning lights
• Plug-n-play, no cutting and splicing required

• Blue LED Accent Lighting
• Injection Molded Acrylic Ring
• LEDs operate off of standard 12v Power
• LED Ring for a XS/SW Series 10" subwoofer

• LED Light Rings
• For Use with Wet Sounds 10" REV Series Tower Speakers
• Color: Red, Green or Blue

• 6-Pin Connectors for LED/RGB Wiring
• Includes Pair of TC3 Swivel Clamps
• Required for Adding LED Lights to REV Speakers

• Compatible with HD factory alarm
• Stops hyper flashing when adding LED turning lights
• Plug-n-play, no cutting and splicing required
• Warning! Gets extremely HOT. Do not mount on plastic and make sure it’s not touching any wires

• RGB LED Lighting for 6.5" Wet Sounds Coaxial Speakers
• Color: Red, Green or Blue
• Requires Wet Sounds RGB Controller

• RGB Expansion Amplifier
• Requires RGB Music Controller
• add an Additional 5 Meter LED Spool to Your Boat

• RGB LED light rings (pair)
• 16 differnet colors
• designed for 8" MB Quart's Nautic marine speakers
• Effect modes including Flash, Strobe, Fade, and Smooth
• Dimensions: Inside diameter: Inside diameter: 7.1", Outside diameter: 8.44"

• RGB LED light ring (single)
• 16 differnet colors
• designed for 10" MB Quart's Nautic marine speakers
• Effect modes including Flash, Strobe, Fade, and Smooth
• Dimensions: Inside diameter: 5.85" x 8.7", Outside diameter: 6.85" x 9.7"

• RGB LED light rings (pair)
• 16 differnet colors
• designed for 6 x 9" MB Quart's Nautic marine speakers
• Effect modes including Flash, Strobe, Fade, and Smooth
• Dimensions: Inside diameter: 9.2", Outside diameter: 10.8"