Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Car Audio & Electronics
  3. Car Speakers
  4. 6.5" Component Speakers

6.5" Component Speakers for your 1989 Colt close

Exclamation Icon It’s a no-brainer.
 Get your speakers here.

Install kit discounts · Guaranteed fit · Full warranty
Filters
Reset Done
Show products that do not fit
Price Range
Speaker Location
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition
Availability

Your Vehicle

close
Checkmark Icon
Fits select locations in your 1989 Colt
Add vehicle details to confirm exact location or Update vehicle.
Update vehicle | Remove vehicle | Vehicle store

Shop the Category

filter-icon Filters & Sort
Limited time!

MB Quart PS1-216

240W Peak (120W RMS) 6.5" Premium Series 2-Way 4-ohm Component Speaker System

PS1-216 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

MB Quart PS1-216

240W Peak (120W RMS) 6.5" Premium Series 2-Way 4-ohm Component Speaker System

• 120 watts Peak Each, 60 watts RMS Each
• 1" Magnesium Dome tweeters
• Tunable waveguide tweeter housing
• Pop Paper-Mica Blend cone material
• Curvilinear cone design geometry
• Impedance: 4 ohm
• Sensitivity: 88.9 dB

Free Baffles with Select Speakers Shop deal
VIP Star Icon

VIP Product Get $17.06 in rewards to spend later

install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
List price $239.99
-29% $170.62 /set
Add to Cart

• 120 watts Peak Each, 60 watts RMS Each
• 1" Magnesium Dome tweeters
• Tunable waveguide tweeter housing
• Pop Paper-Mica Blend cone material
• Curvilinear cone design geometry
• Impedance: 4 ohm
• Sensitivity: 88.9 dB

Limited time!

Kenwood KFC-P710PS

560W Peak (160W RMS) 6.5" Performance Series 2-Way 4-ohm Component Speakers

KFC-P710PS big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Kenwood KFC-P710PS

560W Peak (160W RMS) 6.5" Performance Series 2-Way 4-ohm Component Speakers

• 280 watts Peak Each, 80 watts RMS Each
• 1" Soft Dome swivel tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB

Free Speaker Accessory at Checkout!
install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
1
List price $210.00
Save $68.50
-33% $141.50 /set
Notify Me

• 280 watts Peak Each, 80 watts RMS Each
• 1" Soft Dome swivel tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB

Limited time!

Massive Audio PK6S

1000W Peak (500W RMS) 6.5" PK Series 2-way 4-ohm Shallow Component Speaker System

PK6S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Massive Audio PK6S

1000W Peak (500W RMS) 6.5" PK Series 2-way 4-ohm Shallow Component Speaker System

• 500 watts Peak Each, 250 watts RMS Each
• 1" Aluminum Bullet tweeters
• Laminate-Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 100 dB

Free Baffles with Select Speakers Shop deal
install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
2
List price $214.99
-21% $169.99 /set
Notify Me

• 500 watts Peak Each, 250 watts RMS Each
• 1" Aluminum Bullet tweeters
• Laminate-Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 100 dB

Limited time!

Alpine HDZ-65CS

600W Peak (200W RMS) 6.5” Status Series Hi-Res 2-Way Component 4-ohm Shallow Speaker System

HDZ-65CS big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Alpine HDZ-65CS

600W Peak (200W RMS) 6.5” Status Series Hi-Res 2-Way Component 4-ohm Shallow Speaker System

• 300 watts Peak Each, 100 watts RMS Each
• Hi-Res Audio Certified
• 1" Carbon Composite Cone Tweeters
• Slim-fit shallow tweeter construction
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB

Free Speaker Accessory Kit at Checkout!
VIP Star Icon

VIP Product Get $72.00 in rewards to spend later

install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
List price $1080.00
Save $360.05
-33% $719.95 /set
Add to Cart

• 300 watts Peak Each, 100 watts RMS Each
• Hi-Res Audio Certified
• 1" Carbon Composite Cone Tweeters
• Slim-fit shallow tweeter construction
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB

Limited time!

JBL STAGE3 GEN2 68CF (STAGE368CF)

1520W Peak (190W RMS) 6.5" Stage3 Gen2 Series 2-Way Component Speaker System

STAGE368CF big Out of stock
Go to item page Right Arrow Icon of Right Arrow

JBL STAGE3 GEN2 68CF (STAGE368CF)

1520W Peak (190W RMS) 6.5" Stage3 Gen2 Series 2-Way Component Speaker System

• 760 watts Peak Each, 95 watts RMS Each
• 3/4" Silk Edge Driven Dome Tweeters
• Plus One Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

Free Speaker Accessory at Checkout!
install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
List price $129.95
-15% $109.95 /set
Add to Cart

• 760 watts Peak Each, 95 watts RMS Each
• 3/4" Silk Edge Driven Dome Tweeters
• Plus One Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

Rockford Fosgate PRIME R165-S (Open Box, Great)

160W Peak (80W RMS) 6.5" Prime Series 2-way 4-ohm Component Speaker System

R165-S big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate PRIME R165-S (Open Box, Great)

160W Peak (80W RMS) 6.5" Prime Series 2-way 4-ohm Component Speaker System

• 80 watts Peak Each, 40 watts RMS Each
• 1/2" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
25
List price $79.99
-15% $67.99 /set
Notify Me

• 80 watts Peak Each, 40 watts RMS Each
• 1/2" Mylar Balanced Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

Rockford Fosgate P165-SE (Open Box, Great)

240W Peak (120W RMS) 6.5" Punch Series 2-way 4-ohm Euro-Fit Component Speaker System

P165-SE big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate P165-SE (Open Box, Great)

240W Peak (120W RMS) 6.5" Punch Series 2-way 4-ohm Euro-Fit Component Speaker System

• 120 watts Peak Each, 60 watts RMS Each
• 1" treated PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB

install icon

Install kits available for most vehicles

additional information required
Fits select locations in your Colt.
Add vehicle details to confirm exact location.
8
List price $199.99
-15% $169.99 /set
Notify Me

• 120 watts Peak Each, 60 watts RMS Each
• 1" treated PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB

Prev 2 3 4 5 6

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in 6.5" Component Speakers

    6.5" Component Speakers Frequently Asked Questions (FAQ)
    6.5" component speakers are a type of car audio speaker system that separates the audio drivers (woofer and tweeter) into individual components. Unlike regular coaxial speakers, where the drivers are mounted together in one unit, component speakers provide better sound quality and more precise imaging. The woofer is typically installed in the door panel, while the separate tweeter can be mounted in a location that optimizes high-frequency performance. This design allows for improved sound staging and a more immersive listening experience.
    The main advantage of 6.5" component speakers is their ability to produce clearer and more detailed sound compared to coaxial speakers. By separating the woofer and tweeter, each driver can focus on its specific frequency range, resulting in better sound separation and reduced distortion. The result is enhanced clarity and imaging, making it easier to distinguish instruments and vocals within the music. Additionally, component speakers are often made with higher-quality materials, which can contribute to improved durability and overall audio performance.
    Most vehicles can accommodate 6.5" component speakers, but compatibility may vary depending on the make and model of your car. Before purchasing component speakers, it's crucial to check the available space in your vehicle's door panels or dashboard to ensure a proper fit. You may need mounting adapters or brackets to install the separate tweeters in a suitable location. If you are uncertain about compatibility, it's best to consult with a car audio specialist or use an online fitment tool to find speakers that are compatible with your specific car model.
    The installation of 6.5" component speakers can be more involved than that of coaxial speakers, especially if separate tweeters need custom mounting. While some experienced car audio enthusiasts may be comfortable with a DIY installation, others may prefer professional installation services. Proper installation is crucial for optimal sound performance and to prevent any damage to your vehicle's interior. Professional installers have the expertise and tools to ensure a secure fit and proper wiring, giving you peace of mind and saving time and effort.
    The power handling and sensitivity of 6.5" component speakers can vary depending on the brand and model. Power handling refers to the maximum amount of power a speaker can handle without getting damaged. It is usually expressed in watts (W) and comes in two measurements: RMS (continuous power) and peak power (maximum power for short bursts). Sensitivity, on the other hand, measures how efficiently a speaker converts power into sound. Higher sensitivity ratings (measured in decibels or dB) mean the speaker requires less power to produce the same volume as a lower sensitivity speaker. When selecting 6.5" component speakers, consider matching their power handling capabilities with your car audio system to ensure proper performance and avoid overdriving the speakers.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1989 Dodge Colt

    2017 Dodge Ram ProMaster 2500

    2011 BMW M3

    1996 Mercury Sable

    2004 Chevrolet Venture

    2019 Honda Pilot

    2017 Audi A3 Quattro

    2011 Saab 9-5

    2016 Dodge Viper

    2003 Audi A4

    Vehicle
    Store     Delete

    2015 Can-Am Commander E LSV SE

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1989 Colt
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo