Boss Tweeters at Sonic Electronix

Boss Tweeters

Audio systems are not complete without the treble and highs Boss tweeters will provide.
Loading...
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
listview icon
gridview icon
Boss TW10

150W Peak (75W RMS) 1" Poly Dome Tweeters

TW10 main
Go to item page

150W Peak (75W RMS) 1" Poly Dome Tweeters

• 1" Poly Dome Tweeters
• 150 watts Max Power
• 4 ohm impedance
• Mounting: Surface or Angle
• Frequency Response: 5,000 - 20,000 Hz
• Sensitivity: 95 dB

6
Boss TW10

150W Peak (75W RMS) 1" Poly Dome Tweeters

In stock

$19.99 (40.02% off)
$11.99

PAIR

Boss TW30

3" Flush Mount Bullet Tweeters (TW-30)

TW30 main
Go to item page

3" Flush Mount Bullet Tweeters (TW-30)

In-line Crossover Network • 3-inches in diameter • 150 watts max per pair (75 watts RMS) • Frequency Response: 2000-25000Hz

17
Boss TW30

3" Flush Mount Bullet Tweeters (TW-30)

In stock

$39.99 (2.50% off)
$38.99

PAIR

Boss TW17

1" Micro Dome Tweeters (TW-17)

TW17 main
Go to item page

1" Micro Dome Tweeters (TW-17)

• Surface/Angle Micro Dome Tweeters

10
Boss TW17

1" Micro Dome Tweeters (TW-17)

Special order

Ships at Later Date

$49.99 (66.01% off)
$16.99

PAIR

(4) BOSS Audio TW-30 Bullet Dome Super Tweeters

3" 500W Flush Mount Bullet Tweeters (TW-30) Package

TW30,TW30 main
Go to item page

3" 500W Flush Mount Bullet Tweeters (TW-30) Package

In-line Crossover Network • 3-inches in diameter • 150 watts max per pair (75 watts RMS) • Frequency Response: 2000-25000Hz

34
(4) BOSS Audio TW-30 Bullet Dome Super Tweeters

3" 500W Flush Mount Bullet Tweeters (TW-30) Package

In stock

$79.98 (8.75% off)
$72.98

PAIR

(8) BOSS Audio TW-30 Super Tweeters

3" Flush Mount Bullet Tweeters (TW-30) Package

(2) TW30,(2) TW30 main
Go to item page

3" Flush Mount Bullet Tweeters (TW-30) Package

In-line Crossover Network • 3-inches in diameter • 150 watts max per pair (75 watts RMS) • Frequency Response: 2000-25000Hz

34
(8) BOSS Audio TW-30 Super Tweeters

3" Flush Mount Bullet Tweeters (TW-30) Package

In stock

Only 2 Left!

$159.96 (8.75% off)
$145.96

PAIR

Boss TW12

1" 400W Max Surface Flush Mount Dome Tweeters

TW12 main
Go to item page

1" 400W Max Surface Flush Mount Dome Tweeters

• .5" Car Tweeters
• Polyimide Dome Tweeter
• 200W Max
• 4 ohms Impedance
• Ferrite Magnet
• Surface/Flush Mountable

1
Boss TW12

1" 400W Max Surface Flush Mount Dome Tweeters

OUT OF STOCK

$17.98 (16.63% off)
$14.99

PAIR

Boss Tweeters Information

With improved clarity and high-temperature voice coils, Boss tweeters are a must-have for your audio system. With surface and flush mounting options available, these small speakers offer crisp sounds. When you think of tweeters, think of Boss.
    clear all items