Deaf Bonce 10" Car Subwoofers

filter-icon Filters & Sort
Loading...
Filters
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Refers to the diameter of the subwoofer, measured in inches.
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
This is the color of the speaker's or subwoofer's cone.
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Deaf Bonce ML-10R D2

1000W Peak (500W RMS) 10” Machete Series Dual 2-Ohm Subwoofer

ML-10R D2 main
Go to item page

1000W Peak (500W RMS) 10” Machete Series Dual 2-Ohm Subwoofer

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 2 ohms
• Mount depth: 4.91"
• Sensitivity: 86.00 dB

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Apr. 5

empty

$84.90

In stock

Only 2 Left!

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 2 ohms
• Mount depth: 4.91"
• Sensitivity: 86.00 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Deaf Bonce ML-10S D2

600W Peak (300W RMS) 10” Machete Series Dual 2-Ohm Subwoofer

ML-10S D2 main
Go to item page

600W Peak (300W RMS) 10” Machete Series Dual 2-Ohm Subwoofer

• Peak Power: 600 watts
• RMS Power: 300 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 2 ohms
• Mount depth: 5.6"
• Sensitivity: 84 dB

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Apr. 5

empty

2
$69.90

In stock

• Peak Power: 600 watts
• RMS Power: 300 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 2 ohms
• Mount depth: 5.6"
• Sensitivity: 84 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Deaf Bonce DB-SA2510 D1

1600W Peak (800W RMS) 10” Apocalypse Series Dual 1-Ohm Subwoofer

DB-SA2510 D1 main
Go to item page

1600W Peak (800W RMS) 10” Apocalypse Series Dual 1-Ohm Subwoofer

• Peak Power: 1,600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 1+1
• Mount depth: 5.95"
• Sensitivity: 85.20 dB

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Apr. 5

empty

$209.90

In stock

Only 2 Left!

• Peak Power: 1,600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 1+1
• Mount depth: 5.95"
• Sensitivity: 85.20 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Deaf Bonce DB-SA2510 D2

1600W Peak (800W RMS) 10” Apocalypse Series Dual 2-Ohm Subwoofer

DB-SA2510 D2 main
Go to item page

1600W Peak (800W RMS) 10” Apocalypse Series Dual 2-Ohm Subwoofer

• Peak Power: 1,600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 2+2
• Mount depth: 5.19"
• Sensitivity: 85.4 dB

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Apr. 5

empty

$209.90

In stock

Only 1 Left!

• Peak Power: 1,600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 2+2
• Mount depth: 5.19"
• Sensitivity: 85.4 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Deaf Bonce MF-10S D4

1600W Peak (800W RMS) 10” Machete Series Dual 4-Ohm Subwoofer

MF-10S D4 main
Go to item page

1600W Peak (800W RMS) 10” Machete Series Dual 4-Ohm Subwoofer

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 2+2
• Mount depth: 5.63"
• Sensitivity: 84.00 dB

shipping truck icon
FREE shipping to VA. Get it Fri, Apr. 7

empty

$129.90

In stock.

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 2+2
• Mount depth: 5.63"
• Sensitivity: 84.00 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Deaf Bonce MF-10S D2

1600W Peak (800W RMS) 10” Machete Series Dual 2-Ohm Subwoofer

Go to item page

1600W Peak (800W RMS) 10” Machete Series Dual 2-Ohm Subwoofer

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 2+2
• Mount depth: 5.63"
• Sensitivity: 84.00 dB

empty

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: 2+2
• Mount depth: 5.63"
• Sensitivity: 84.00 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
    clear all items
    Related Categories

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?

    Add vehicle

    Save up to 10 different vehicles in your garage

    Loading...
    < Back