Discontinued Rockford Fosgate 2-Channel Amplifiers

50 watts RMS x 2 at 4 ohm • 100 watts RMS x 2 at 2 ohm • stereo or bridged mono output • variable high- and low-pass filters (40 - 400Hz at 12 dB/octave) • MOSFET power supply and output stages • CEA compliant • 4-ohm stable in bridged mode

TOPAZ eliminates ground loop noise • MOSFET power supplies and outputs • stereo or bridged mono output • NOMAD "intelligent" protection circuitry • variable high-/low-pass crossover (40-400 Hz, 12 dB/octave) • variable Punch Bass boost (0-18 dB at 45 Hz) with wired remote • requires an 8-gauge wiring kit — wiring and hardware not included with amplifier

Punch Series 2-Channel Class AB Car Amplifier • 50W x 2 chan. @ 4 ohm • 100W x 2 chan. @ 2 ohm • MOSFET power supply • RCA Pass-thru outputs

4 ohm: 60 watts x 2 • 2 ohm: 125 watts x 2 • Bridged, 4 ohm: 250 watts x 1 • CEA-2006 Compliant • Focused mass heatsink design • S/N ratio: >80 dB • Frequency Response: 20 Hz - 20 kHz

• 4 ohm: 200 watts x 2
• 2 ohm: 300 watts x 2
• Bridged, 4 ohm: 600 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

550W Punch Series 2-Channel Amplifier • 150W x 2 chan. @ 4 Ohm • 275W x 2 chan. @ 2 Ohm • mass heatsink design • specially designed MOSFETs • preamp inputs and outputs • CEA-2006 compliant

CEA compliant • 600 watts RMS x 1 at 4 ohm • 4-ohm stable in bridged mode • MOSFET power supplies and output stages • MEHSA transfers heat efficiently from the MOSFET devices to the heat sink for high performance • TOPAZ eliminates ground loop noise • variable Punch Bass boost (0-18 dB at 45 Hz) with remote

Punch Series 2-Channel Amplifier • 80W x 2 chan. @ 4 Ohm • 160W x 2 chan. @ 2 Ohm • focused mass heatsink design • special-design TO-247 MOSFETs • top mounted LED indicators • thermal sensing

200 watts, Punch Series 2-Channel Amplifier • 50W x 2 chan. @ 4 Ohm • 100W x 2 chan. @ 2 Ohm • mass heatsink design • specially designed MOSFETs • preamp inputs and outputs • CEA-2006 compliant

• 4 ohm: 120 watts x 2
• 2 ohm: 240 watts x 2
• Bridged, 4 ohm: 400 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

400 watts RMS x 1 bridged • variable high-pass/low-pass crossover • wired remote control of Punch Bass • preamp outputs

300 watts RMS x 1 bridged • variable high-pass/low-pass crossover • wired remote control of Punch Bass

'25 to LIFE' Special Edition 2-channel car amplifier • • 180 watts RMS x 1 bridged output at 4 ohm • wired remote bass boost • variable high- or low-pass filters • custom-designed TO-247 MOSFET power supply and output stage for more clean headroom

2-Channel Prime Series Class A/B Car Amplifier • 4 ohm: 40 watts x 2 chan. • 2 ohm: 65 watts x 2 chan. • Bridged, 4 ohm: 125 watts x 1 chan. • Pulse Width Modulated MOSFET Power Supply • 2 or Mono channel operation

500 watts RMS x 1 bridged • variable high-pass/low-pass crossover • wired remote control of Punch Bass

500 watt Power Series 2-Channel Amplifier • 75 watts x 3 chan. @ 4 Ohm • 150 watts x 2 chan. @ 2 Ohm • 250 watts x 2 chan. @ 1 Ohm • preamp inputs and outputs • CEA-2006 compliant

Punch Series 2-Channel Amplifier • 100W x 2 chan. @ 4 Ohm • 225W x 2 chan. @ 2 Ohm • focused mass heatsink design • TO-247 MOSFETs • removable connector cover • LED indicators • preamp inputs/outputs

800 watts RMS x 1 bridged • variable high-pass/low-pass crossover • wired remote control of Punch Bass

200 watts x 1 bridged • selectable high-pass/low-pass crossover • selectable Punch Bass boost

CEA compliant • MOSFET power supplies and output stages • MEHSA transfers heat efficiently from the MOSFET devices to the heat sink for high performance • TOPAZ eliminates ground loop noise • trans-ANA circuitry keeps preamp signal clean • Tri-way capable • 200 watts RMS x 2 at 4 ohm