JL Audio Marine Audio & Electronics

• 3mm Neoprene Covers
• Each cover is laminated with dark gray spandex
• Marine-ready materials
• Protects against dust, grime and other environmental invaders
• Designed to work with any mounting clamp/application

• For JL Audio 7.7" wakeboard tower speakers
• UV-resistant Neoprene laminated
• Salt, Fog, and Sunlight Resistant
• Tiny laser cut holes allow moisture to escape
• High-quality #5 zippers

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Synthetic Rubber Surround
• Mount depth: 5.9"
• Sensitivity: 86.1 dB

• Custom Fit In-Dash Compact Marine Source Unit with Full-Color LCD
• 2.8" LCD Text Display
• 2sets of 4 volts preamp outputs
• AM/FM tuner with 18 presets across all tuners

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 1.00"
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• 2.25" Pipe Mounting Fixtures for VeX Marine Tower Speakers
• Fixed mounting fixtures for PS650-VeX models
• Anodized finish with UV corrosion-resistant
• Allows mount to a variety of roll cage diameters or flat surfaces

• Works with your JL Audio LED speakers
• Control lighting colors and the intensity of your lighting
• Compact system can be installed in almost any application
• Built-in over-current and short-circuit protection
• Built-in voltage and temperature monitoring

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Bluetooth Version 5.0 Digital Multimedia Receiver
• Smartphone Compatible
• 2 sets of preamp outputs
• IPX67 for Marine, Powersports, RV
• Mounting Depth: 2.36"

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.50 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 speaker models

• RMS Power: 200 watts
• Impedance: Single 4 ohm
• Injection Molded Polypropylene Cone
• Synthetic Rubber Surround
• Mount depth: 5.07"
• Sensitivity: 86.8 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.500"
• Color: Black

• 2 Speaker Audio Upgrade System
• Includes 6.5" coaxial speakers, 3-channel amplifier, and Bluetooth receiver
• Direct fit for select 2019 FB1800A WaveRunner FX Cruiser HO and FC1800 WaveRunner FX SVHO
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware

• 100 watts RMS Each
• 1" Silk Dome Tweeter
• Injection Molded Polypropylene Material
• Impedance: 4 ohm
• Sensitivity: 91 dB
• Mounting Depth: 3.32"

• Swivel mount clamp fixture for ETXv3 tower speakers
• Connects with swivel mount clamps (clamps not included)
• Designed for 2006-up OEM MasterCraft Tower
• Sold as pair (2 swivel mount clamp fixture)

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• JL Audio Tower Speaker Swivel Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers
• 334 Degrees of Total Swivel Capability

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.875"
• Color: Black

• 2 Speaker Audio Upgrade System
• Includes 6.5" coaxial speakers, 3-channel amplifier, and Bluetooth receiver
• Direct fit for select 2019 FC1800 WaveRunner FX SVHO and FB1800A WaveRunner FX Cruiser HO
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware