Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Kicker Store
  3. Discontinued Kicker Car Audio & Electronics
  4. Discontinued Kicker Car Amplifiers
  5. Discontinued Kicker Mini Car Amps

Discontinued Kicker Mini Car Amps

Compact and powerful – Kicker's mini amps are perfect for any space.

Filters
Kicker ✕
Clear Filters
Reset Done
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Kicker DXA 250.1 (43DXA2501) Open Box Complete

250W Max (125W RMS) DX-Series Monoblock Subwoofer Amplifier

43DXA2501 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker DXA 250.1 (43DXA2501) Open Box Complete

250W Max (125W RMS) DX-Series Monoblock Subwoofer Amplifier

• RMS Power: 125W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

3

• RMS Power: 125W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Kicker 2-Channel Amplifier - DXA125.2 (41DXA1252)

250W Peak (125W RMS) DX-Series Class-AB 2-Channel 2-Ohm Stable Speaker or Subwoofer Amplifier

41DXA1252 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 2-Channel Amplifier - DXA125.2 (41DXA1252)

250W Peak (125W RMS) DX-Series Class-AB 2-Channel 2-Ohm Stable Speaker or Subwoofer Amplifier

• RMS Power: 30W x 2 @ 4 ohm, 60W x 2 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006
• Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

1

• RMS Power: 30W x 2 @ 4 ohm, 60W x 2 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006
• Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Kicker KX1600.1 (40KX1600.1) Open Box Complete

1600W RMS KX Series Monoblock Class D Car Power Amplifier

KX1600.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX1600.1 (40KX1600.1) Open Box Complete

1600W RMS KX Series Monoblock Class D Car Power Amplifier

• RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H

2

• RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H

Kicker PXIBT100.2 (42PXiBT1002) Open Box Complete

200W Peak (100W RMS) 2-Channel Amplifier with Remote Level Control w/ Bluetooth and Bass Controller

PXiBT100.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXIBT100.2 (42PXiBT1002) Open Box Complete

200W Peak (100W RMS) 2-Channel Amplifier with Remote Level Control w/ Bluetooth and Bass Controller

• 25 Watts RMS x 2 @ 4 ohm
• 50 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 200 Watts
• Weather proof for motorcycle, ATV and classic car applications
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 3-7/16"W x 7"L x 1-5/8"H

2

• 25 Watts RMS x 2 @ 4 ohm
• 50 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 200 Watts
• Weather proof for motorcycle, ATV and classic car applications
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 3-7/16"W x 7"L x 1-5/8"H

Kicker Monoblock KX800.1 (40KX800.1) Open Box Complete

800W RMS KX Series Class D Monoblock High Efficiency Subwoofer Amplifier

KX800.1-OB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker Monoblock KX800.1 (40KX800.1) Open Box Complete

800W RMS KX Series Class D Monoblock High Efficiency Subwoofer Amplifier

• RMS: 400W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 9-9/16"L x 2-1/8"H

• RMS: 400W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 9-9/16"L x 2-1/8"H

Kicker PXIBT100.2 (42PXiBT1002) Open Box

200W Peak (100W RMS) 2-Channel Amplifier with Remote Level Control w/ Bluetooth and Bass Controller

PXiBT100.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXIBT100.2 (42PXiBT1002) Open Box

200W Peak (100W RMS) 2-Channel Amplifier with Remote Level Control w/ Bluetooth and Bass Controller

• 25 Watts RMS x 2 @ 4 ohm
• 50 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 200 Watts
• Weather proof for motorcycle, ATV and classic car applications
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 3-7/16"W x 7"L x 1-5/8"H

2

• 25 Watts RMS x 2 @ 4 ohm
• 50 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 200 Watts
• Weather proof for motorcycle, ATV and classic car applications
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 3-7/16"W x 7"L x 1-5/8"H

Kicker PXA300.4 / 42PXA3004 Damaged Packaging Only (New)

300W 4-Channel PXA-Series Powersports/ATV/Motorcycle/Car/Boat/Mini Amplifier

42PXA3004 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXA300.4 / 42PXA3004 Damaged Packaging Only (New)

300W 4-Channel PXA-Series Powersports/ATV/Motorcycle/Car/Boat/Mini Amplifier

• RMS: 50W x 4 @ 4 ohm, 75W x 4 @ 2 ohm, 150W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

5

• RMS: 50W x 4 @ 4 ohm, 75W x 4 @ 2 ohm, 150W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

Kicker PXA200.2 Compact 2-Channel Amplifier (42PXA2002) Open Box

200W RMS Ultra Compact PXA Series 2-Channel Full Range Mini Weatherproof Amplifier for Motorcycles, Side-by-Sides, ATV’s, and Cars (42PXA2002)

42PXA2002 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXA200.2 Compact 2-Channel Amplifier (42PXA2002) Open Box

200W RMS Ultra Compact PXA Series 2-Channel Full Range Mini Weatherproof Amplifier for Motorcycles, Side-by-Sides, ATV’s, and Cars (42PXA2002)

• RMS: 25W x 2 @ 4 ohm, 50W x 2 @ 2 ohm, 100W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

1

• RMS: 25W x 2 @ 4 ohm, 50W x 2 @ 2 ohm, 100W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

Kicker PXA300.4 (42PXA3004) Open Box

300W 4-Channel PXA-Series Powersports/ATV/Motorcycle/Car/Boat/Mini Amplifier

42PXA3004 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXA300.4 (42PXA3004) Open Box

300W 4-Channel PXA-Series Powersports/ATV/Motorcycle/Car/Boat/Mini Amplifier

• RMS: 50W x 4 @ 4 ohm, 75W x 4 @ 2 ohm, 150W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

4

• RMS: 50W x 4 @ 4 ohm, 75W x 4 @ 2 ohm, 150W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

Kicker KX1600.1 (40KX1600.1) - Open Box, Acceptable but Missing part(s) (Used)

1600W RMS KX Series Monoblock Class D Car Power Amplifier - Open Box, Acceptable but Missing part(s) (Used)

40KX1600.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX1600.1 (40KX1600.1) - Open Box, Acceptable but Missing part(s) (Used)

1600W RMS KX Series Monoblock Class D Car Power Amplifier - Open Box, Acceptable but Missing part(s) (Used)

• RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H

• RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H

Kicker KX2400.1 (40KX2400.1)

2400W RMS KX Series Monoblock Class D Car Power Amplifier (KX 2400.1)

40KX2400.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX2400.1 (40KX2400.1)

2400W RMS KX Series Monoblock Class D Car Power Amplifier (KX 2400.1)

• RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 15-1/2"L x 2-1/8"H

5

• RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 15-1/2"L x 2-1/8"H

Kicker DXA250.1 (43DXA2501)

500W Max (250W RMS) DX-Series Monoblock Subwoofer Amplifier

DXA250.1-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker DXA250.1 (43DXA2501)

500W Max (250W RMS) DX-Series Monoblock Subwoofer Amplifier

• RMS Power: 125W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Fail-Safe Integration Technology
• Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

3

• RMS Power: 125W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Fail-Safe Integration Technology
• Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Kicker PXA500.1 (42PXA5001)

500W RMS PXA Series Compact Monoblock Amplifier

42PXA5001 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXA500.1 (42PXA5001)

500W RMS PXA Series Compact Monoblock Amplifier

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Compact and Weather-resistant
• Class D 2 ohm Stable Monoblock Amplifier

2

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Compact and Weather-resistant
• Class D 2 ohm Stable Monoblock Amplifier

Prev 1 2

Items per page: 20 40 60

    Clear all

    Kicker Mini Car Amps Information

    Amplify your audio with Kicker min amps. These small but powerful amps can fit in tight spaces and provide enough power for your car audio system. Kicker has the knowledge and experience when it comes to mini amps.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2010 Lexus LX570

    2009 Audi A6

    2015 Kia K900

    2012 Mitsubishi Lancer

    1999 Volvo V70

    2020 Audi Q5 PHEV

    2016 Ford Transit-350

    2001 Acura NSX

    2003 Pontiac Sunfire

    2009 Kia Rio

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2010 LX570
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo