All Sony Component Car Subwoofers

Loading...
Filters
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Refers to the diameter of the subwoofer, measured in inches.
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
This is the color of the speaker's or subwoofer's cone.
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Shop the Category
filter-icon Filters & Sort

Sony XSW124GS

1800W Peak (420W RMS) 12“ XS Series Single 4-ohm Subwoofer

XSW124GS main
Go to item page

1800W Peak (420W RMS) 12“ XS Series Single 4-ohm Subwoofer

• Peak Power: 1800 watts
• RMS Power: 420 watts
• Paper Cone with Polypropylene Cap
• Rubber Surround
• Impedance: Single 4 ohms
• Mount depth: 5-3/4"
• Sensitivity: 83 dB

shipping truck icon
FREE 3-day shipping to VA. Get it Tue, Oct. 3

empty

Was $149.99 Details
$148.00

In stock

Only 2 Left!

• Peak Power: 1800 watts
• RMS Power: 420 watts
• Paper Cone with Polypropylene Cap
• Rubber Surround
• Impedance: Single 4 ohms
• Mount depth: 5-3/4"
• Sensitivity: 83 dB

XSW124GS small

Item added to your cart.

Price: $148.00

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Single 12" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$69.99

$69.99

Add to cart
Single 12" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$79.99

$84.95

Add to cart
NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$49.99

$29.99

Add to cart
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$9.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Stinger RKXTK

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

$209.00

$79.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$14.99

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart

Sony XSW104GS

1500W Peak (350W RMS) 10" XS Series Single 4-ohm Subwoofer

XSW104GS main
Go to item page

1500W Peak (350W RMS) 10" XS Series Single 4-ohm Subwoofer

• Peak Power: 1500 watts
• RMS Power: 350 watts
• Paper Cone with Polypropylene Cap
• Rubber Surround
• Impedance: Single 4 ohms
• Mount depth: 5-3/8"
• Sensitivity: 86 dB

shipping truck icon
FREE 3-day shipping to VA. Get it Tue, Oct. 3

empty

Was $139.99 Details
$138.00

In stock

Only 2 Left!

• Peak Power: 1500 watts
• RMS Power: 350 watts
• Paper Cone with Polypropylene Cap
• Rubber Surround
• Impedance: Single 4 ohms
• Mount depth: 5-3/8"
• Sensitivity: 86 dB

XSW104GS small

Item added to your cart.

Price: $138.00

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Dual 10" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$149.99

$99.99

Add to cart
Single 10" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$99.99

$99.99

Add to cart
Dual 10" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$109.99

$109.99

Add to cart
Single 10" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$109.99

$69.99

Add to cart
Single 10" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$89.99

$89.99

Add to cart
NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

$64.99

$39.99

Add to cart
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$9.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Stinger RKXTK

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

$209.00

$79.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$14.99

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart
    clear all

    FAQ Frequently asked questions in All Sony Component Car Subwoofers


    Component car subwoofers are specialized speakers designed to reproduce low-frequency sound, commonly known as bass, in a car audio system. Unlike full-range speakers, component subwoofers are dedicated solely to producing deep and powerful bass tones, enhancing the overall audio experience by providing rich and impactful low-end frequencies.
    Component car subwoofers work by moving air to create low-frequency sound waves. When an electrical signal is sent to the subwoofer's voice coil, it generates a magnetic field that interacts with the fixed magnet, causing the voice coil to move back and forth. This movement, in turn, pushes and pulls the subwoofer's cone, creating air pressure variations that produce bass sound waves.
    Using component car subwoofers offers several benefits. They enhance the audio system's bass performance, adding depth and impact to music, movies, and other audio content. Subwoofers allow you to experience the full range of frequencies in your favorite tracks, making the listening experience more immersive and enjoyable. They also relieve the main speakers from producing bass frequencies, which can result in cleaner and more accurate sound reproduction overall.
    Choosing the right component car subwoofer involves considering factors like your vehicle's available space, your preferred bass level, and the type of music you enjoy. Pay attention to the subwoofer's size, power handling, and sensitivity ratings, which influence its performance. Match the subwoofer's power handling with your amplifier's capabilities to avoid underpowering or overpowering. Reading user reviews, consulting online resources, and seeking advice from car audio professionals can help you select the appropriate component subwoofer that suits your audio preferences and vehicle setup.
    Installing component car subwoofers can vary in complexity based on your vehicle's wiring, enclosure design, and your familiarity with car audio installation. If you're comfortable with basic car electronics and following instructions, you may be able to handle the installation yourself. However, if the installation involves custom enclosures, complex wiring, or if you're not experienced with these tasks, seeking assistance from a professional car audio installer is recommended. Professionals can ensure proper installation, wiring connections, and acoustic tuning, ensuring that your component subwoofers deliver optimal bass performance while preserving your vehicle's interior integrity.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?

    Add vehicle

    Save up to 10 different vehicles in your garage

    Loading...
    < Back