Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Precision Power Store
  3. Discontinued Precision Power Car Audio & Electronics
  4. Discontinued Precision Power Car Amplifiers
  5. Discontinued Precision Power Monoblock Amplifiers

Discontinued Precision Power Monoblock Amplifiers

Experience deep, impactful bass with Precision Power (PPI)'s Monoblock Amplifiers.

Match Amps to Subs
Filters
Precision Power ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Precision Power (PPI) i650.1

650W RMS Class D iON Series Monoblock Car Amplifier

i650.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power (PPI) i650.1

650W RMS Class D iON Series Monoblock Car Amplifier

• 400 watts x 1 channel @ 4 ohm
• 650 watts x 1 channel @ 2 ohm
• Total RMS Power: 650 watts
• Class D 2 ohm Stable Monoblock Amplifier

VIP Star Icon

VIP Product Get $14.00 in rewards to spend later

15

• 400 watts x 1 channel @ 4 ohm
• 650 watts x 1 channel @ 2 ohm
• Total RMS Power: 650 watts
• Class D 2 ohm Stable Monoblock Amplifier

Precision Power (PPI) PC1000.1D

1000W RMS Class D Vertical PowerClass Series Monoblock Car Amplifier with Bass Remote

PC1000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power (PPI) PC1000.1D

1000W RMS Class D Vertical PowerClass Series Monoblock Car Amplifier with Bass Remote

• 300 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

VIP Star Icon

VIP Product Get $21.00 in rewards to spend later

• 300 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

Precision Power ICE1300.1D

1300W Max Black Ice Series 1-Ohm Stable Class-D Monoblock Amplifier

ICE1300.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power ICE1300.1D

1300W Max Black Ice Series 1-Ohm Stable Class-D Monoblock Amplifier

• 300 Watts RMS x 1 @ 4 ohm
• 450 Watts RMS x 1 @ 2 ohm
• 650 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1300 Watts
• Variable low-pass filter: 40 - 220 Hz, 24 dB/octave
• Subsonic filter: 20 - 50 Hz , 24 dB/octave
• Dimensions: 5"W x 10"L x 5"H

Promo Savings Icon
2

• 300 Watts RMS x 1 @ 4 ohm
• 450 Watts RMS x 1 @ 2 ohm
• 650 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1300 Watts
• Variable low-pass filter: 40 - 220 Hz, 24 dB/octave
• Subsonic filter: 20 - 50 Hz , 24 dB/octave
• Dimensions: 5"W x 10"L x 5"H

Precision Power PPI ICE5000.1D

5000W Peak (2500W RMS) Black Ice Series Class-D Strappable Monoblock 1-Ohm Stable Amplifier

ICE5000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI ICE5000.1D

5000W Peak (2500W RMS) Black Ice Series Class-D Strappable Monoblock 1-Ohm Stable Amplifier

• 1200 Watts RMS x 1 @ 4 ohm
• 1700 Watts RMS x 1 @ 2 ohm
• 2500 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 5000 Watts
• Variable low-pass filter: 40 - 220 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 12 dB/octave
• Dimensions: 5"W x 17"L x 5"H

• 1200 Watts RMS x 1 @ 4 ohm
• 1700 Watts RMS x 1 @ 2 ohm
• 2500 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 5000 Watts
• Variable low-pass filter: 40 - 220 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 12 dB/octave
• Dimensions: 5"W x 17"L x 5"H

Precision Power TRAX1.1200D

1200W Max (600W RMS) Trax Series 2-ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

TRAX1.1200D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power TRAX1.1200D

1200W Max (600W RMS) Trax Series 2-ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

• 400 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1200 Watts
• Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.75" W x 15" L x 2.5" H

5

• 400 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1200 Watts
• Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.75" W x 15" L x 2.5" H

Precision Power ICE2600.1D

2600W Max Black Ice Series 1-Ohm Stable Class-D Monoblock Amplifier

ICE2600.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power ICE2600.1D

2600W Max Black Ice Series 1-Ohm Stable Class-D Monoblock Amplifier

• 600 Watts RMS x 1 @ 4 ohm
• 900 Watts RMS x 1 @ 2 ohm
• 1300 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2600 Watts
• Variable low-pass filter: 40 - 220 Hz, 24 dB/octave
• Subsonic filter: 20 - 50 Hz , 24 dB/octave
• Dimensions: 5"W x 12"L x 5"H

11

• 600 Watts RMS x 1 @ 4 ohm
• 900 Watts RMS x 1 @ 2 ohm
• 1300 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2600 Watts
• Variable low-pass filter: 40 - 220 Hz, 24 dB/octave
• Subsonic filter: 20 - 50 Hz , 24 dB/octave
• Dimensions: 5"W x 12"L x 5"H

Precision Power TRAX1.3000D

3000W Max (1500W RMS) Trax Series 2 ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

TRAX1.3000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power TRAX1.3000D

3000W Max (1500W RMS) Trax Series 2 ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

• 1000 Watts RMS x 1 @ 4 ohm
• 1500 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 3000 Watts
• Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.75" W x 16.5" L x 2.5" H

• 1000 Watts RMS x 1 @ 4 ohm
• 1500 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 3000 Watts
• Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.75" W x 16.5" L x 2.5" H

Precision Power TRAX1.2000D

2000W Max (700W RMS) 2-ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

TRAX1.2000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power TRAX1.2000D

2000W Max (700W RMS) 2-ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

• 700 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2000 Watts
• Subsonic and Low Pass Filters
• 0-12dB Bass BOost
• Aluminum Heatsink
• Dimensions: 9.75" W x 14" L x 2.5 "H

2

• 700 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2000 Watts
• Subsonic and Low Pass Filters
• 0-12dB Bass BOost
• Aluminum Heatsink
• Dimensions: 9.75" W x 14" L x 2.5 "H

Precision Power PPI P1000.1

1000W RMS Phantom Series Class D Full Range Monoblock Amplifier

P1000.1-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI P1000.1

1000W RMS Phantom Series Class D Full Range Monoblock Amplifier

• RMS: 580W x 1 @ 4 ohm, 725W x 1 @ 2 ohm 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 12-15/16" L x 6-3/4" W x 2" H

28

• RMS: 580W x 1 @ 4 ohm, 725W x 1 @ 2 ohm 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 12-15/16" L x 6-3/4" W x 2" H

Precision Power PPI BA5000.1D

5000W Black Ice Series Monoblock Class D Car Amplifier

BA5000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI BA5000.1D

5000W Black Ice Series Monoblock Class D Car Amplifier

• RMS Power: 1200W x 1 @ 4 ohm, 1700W x 1 @ 2 ohm, 2500W x 1 @ 1 ohm
• Total Peak Power: 5000W
• Variable 12dB High, Low, & Subsonic Crossovers
• Dimensions: 8.6"W x 17"L x 2.3"H

7

• RMS Power: 1200W x 1 @ 4 ohm, 1700W x 1 @ 2 ohm, 2500W x 1 @ 1 ohm
• Total Peak Power: 5000W
• Variable 12dB High, Low, & Subsonic Crossovers
• Dimensions: 8.6"W x 17"L x 2.3"H

Precision Power PPI ICE7000.1D

7000W Peak (2300W RMS) Black Ice Series Class-D Strappable Monoblock 1-Ohm Stable Amplifier

ICE7000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI ICE7000.1D

7000W Peak (2300W RMS) Black Ice Series Class-D Strappable Monoblock 1-Ohm Stable Amplifier

• 1000 Watts RMS x 1 @ 4 ohm
• 1500 Watts RMS x 1 @ 2 ohm
• 2300 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 7000 Watts
• Variable low-pass filter: 40 - 220 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 12 dB/octave
• Dimensions: 5"W x 21"L x 5"H

2

• 1000 Watts RMS x 1 @ 4 ohm
• 1500 Watts RMS x 1 @ 2 ohm
• 2300 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 7000 Watts
• Variable low-pass filter: 40 - 220 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 12 dB/octave
• Dimensions: 5"W x 21"L x 5"H

Precision Power PPI BA7000.1D

7000W Black Ice Series Monoblock Class D Car Amplifier

Get bigger discounts with our bundled Savings:
View All Deals!

BA7000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI BA7000.1D

7000W Black Ice Series Monoblock Class D Car Amplifier

• RMS Power: 1000W x 1 @ 4 ohm, 1500W x 1 @ 2 ohm, 2300 x 1 @ 1 ohm, 3500W x 1 @ 0.5 ohm
• Total Peak Power: 7000W
• Variable 12dB High, Low, & Subsonic Crossovers
• Dimensions: 8.6"W x 21"L x 2.3"H

Promo Savings Icon

Get bigger discounts with our bundled Savings:
View All Deals!

8

• RMS Power: 1000W x 1 @ 4 ohm, 1500W x 1 @ 2 ohm, 2300 x 1 @ 1 ohm, 3500W x 1 @ 0.5 ohm
• Total Peak Power: 7000W
• Variable 12dB High, Low, & Subsonic Crossovers
• Dimensions: 8.6"W x 21"L x 2.3"H

Precision Power PPI PDX-10K (Rare Competition Amplifier)

10,000W RMS, Monoblock Class D PDX Series Car Amplifier

PDX-10K big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI PDX-10K (Rare Competition Amplifier)

10,000W RMS, Monoblock Class D PDX Series Car Amplifier

• RMS: 3700W x 1 @ 2 ohm, 6100W x 1 @ 1 ohm, 10000W x 1 @ 0.5 ohm
• Total RMS Power: 10000W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• Class D Circuitry
• Dimensions: 12-5/8"W x 23-1/4"L x 2-3/4"H

7

• RMS: 3700W x 1 @ 2 ohm, 6100W x 1 @ 1 ohm, 10000W x 1 @ 0.5 ohm
• Total RMS Power: 10000W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• Class D Circuitry
• Dimensions: 12-5/8"W x 23-1/4"L x 2-3/4"H

Precision Power PPI S2000.1D

2000W RMS Sedona Series Class D Monoblock Amplifier

S2000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI S2000.1D

2000W RMS Sedona Series Class D Monoblock Amplifier

• RMS: 750W x 1 @ 4 ohm, 1300W x 1 @ 2 ohm, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 19"L x 9-1/2"W x 2-3/8"H

5

• RMS: 750W x 1 @ 4 ohm, 1300W x 1 @ 2 ohm, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 19"L x 9-1/2"W x 2-3/8"H

Precision Power PPI S850.1D

850W RMS Sedona Series Class D Monoblock Amplifier

S850.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI S850.1D

850W RMS Sedona Series Class D Monoblock Amplifier

• RMS: 350W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 850W x 1 @ 1 ohm
• Total RMS Power: 850W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 13-1/2"L x 9-1/2"W x 2-3/8"H

10

• RMS: 350W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 850W x 1 @ 1 ohm
• Total RMS Power: 850W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 13-1/2"L x 9-1/2"W x 2-3/8"H

Precision Power PPI S1300.1D

1300W RMS, Sedona Series Class D Monoblock Amplifier

S1300.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI S1300.1D

1300W RMS, Sedona Series Class D Monoblock Amplifier

• RMS: 520W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1300W x 1 @ 1 ohm
• Total RMS Power: 1300W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 16-3/8"L x 9-1/2"W x 2-3/8"H

4

• RMS: 520W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1300W x 1 @ 1 ohm
• Total RMS Power: 1300W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 16-3/8"L x 9-1/2"W x 2-3/8"H

Precision Power PPI BA2600.1D

2600W Black Ice Series Monoblock Class D Car Amplifier

BA2600.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI BA2600.1D

2600W Black Ice Series Monoblock Class D Car Amplifier

• RMS Power: 600W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1300W x 1 @ 1 ohm
• Total Peak Power: 2600W
• Variable 12dB High, Low, & Subsonic Crossovers
• Dimensions: 8.6"W x 12"L x 2.3"H

3

• RMS Power: 600W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1300W x 1 @ 1 ohm
• Total Peak Power: 2600W
• Variable 12dB High, Low, & Subsonic Crossovers
• Dimensions: 8.6"W x 12"L x 2.3"H

Precision Power PPI D3000/1

3000W Max, Class D Monoblock Car Amplifier

D3000/1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI D3000/1

3000W Max, Class D Monoblock Car Amplifier

3000W Class D MonoBlock Amplifier • 495W x 1 chan. @ 4 Ohm • 1000W x 1 chan. @ 2 Ohm • QBASS • PWM power supply • gold plated RCA connectors • CEA-2006 compliant

5

3000W Class D MonoBlock Amplifier • 495W x 1 chan. @ 4 Ohm • 1000W x 1 chan. @ 2 Ohm • QBASS • PWM power supply • gold plated RCA connectors • CEA-2006 compliant

Precision Power PPI BK1800.1D

1800W RMS Monoblock Class D Black Ice Series Car Amplifier

BK1800.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI BK1800.1D

1800W RMS Monoblock Class D Black Ice Series Car Amplifier

• RMS: 700W x 1 @ 4 ohm, 1100W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total RMS Power: 1800W
• Remote Bass Knob Included!
• Switchable Bass Boost (0, +6, or +12 dB)
• Balanced Signal Input for Noise Rejection
• Dimensions: 19-3/4"L x 8-1/4"W x 2"H

14

• RMS: 700W x 1 @ 4 ohm, 1100W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total RMS Power: 1800W
• Remote Bass Knob Included!
• Switchable Bass Boost (0, +6, or +12 dB)
• Balanced Signal Input for Noise Rejection
• Dimensions: 19-3/4"L x 8-1/4"W x 2"H

Precision Power PPI S270.1

270W Max, Sedona Series 1-Channel Monoblock Class AB Amplifier

S270.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI S270.1

270W Max, Sedona Series 1-Channel Monoblock Class AB Amplifier

• RMS: 170W x 1 @ 4 ohm, 270W x 1 @ 2 ohm
• Total RMS Power: 270W
• Brushed Aluminum Finish
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 13-1/3L x 9-1/2W x 2-1/3H

4

• RMS: 170W x 1 @ 4 ohm, 270W x 1 @ 2 ohm
• Total RMS Power: 270W
• Brushed Aluminum Finish
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 13-1/3L x 9-1/2W x 2-1/3H

1 2 3 Next

Items per page: 20 40 60

    Clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2017 Toyota Prius C

    2001 Kia Optima

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2017 Prius C
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo