Massive Audio Tweeters at Sonic Electronix

Massive Audio Tweeters

Audio systems are not complete without the treble and highs Massive Audio tweeters will provide.
Loading...
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
listview icon
gridview icon
Massive Audio T35

25.5mm Voice Coil 240W Max (120W RMS) Surface Mount Bullet Tweeters

T35 main
Go to item page

25.5mm Voice Coil 240W Max (120W RMS) Surface Mount Bullet Tweeters

• 25.5mm Voice Coil Car Tweeters
• Aluminum Bullet Tweeter
• 120W Max Each
• 60W RMS Each
• 4 ohms Impedance
• 18dB Crossover Recommended
• Field Replaceable Voice Coil
• High Grade Ferrite Magnet

2
Massive Audio T35

25.5mm Voice Coil 240W Max (120W RMS) Surface Mount Bullet Tweeters

In stock

$42.49 (17.65% off)
$34.99

PAIR

Hide info
More info Item page
1 Special offer
  • Get 50% off Sound Damping to stop the rattles/vibrations!
Massive Audio PAT 250 (Sold Individually)

140W Max (70W RMS) 1-3/8" Screw On PAT Series Pro Audio Midrange Driver

PAT 250 main
Go to item page

140W Max (70W RMS) 1-3/8" Screw On PAT Series Pro Audio Midrange Driver

• 140W Max Each, 70W RMS Each
• Field-replaceable voice coil
• Phenlonic diaphragm
• 8 ohms Impedance
• Sensitivity: 107dB
• Ferrofluid cooled

Massive Audio PAT 250 (Sold Individually)

140W Max (70W RMS) 1-3/8" Screw On PAT Series Pro Audio Midrange Driver

In stock

$42.49 (20.00% off)
$33.99
Massive Audio PAT 3 (Sold Individually)

60W Max (30W RMS) 1" Screw On PAT Series Pro Audio Compression Driver

PAT 3 main
Go to item page

60W Max (30W RMS) 1" Screw On PAT Series Pro Audio Compression Driver

• 120W Max Each, 60W RMS Each
• High Grade Ferrite Magnet
• Ferrofluid Cooled
• 8 ohms Impedance
• Sensitivity: 108dB
• Field-Replaceable Voice Coil

Massive Audio PAT 3 (Sold Individually)

60W Max (30W RMS) 1" Screw On PAT Series Pro Audio Compression Driver

In stock

$32.49 (16.93% off)
$26.99
Hide info
More info Item page
1 Special offer
  • Get 50% off Sound Damping to stop the rattles/vibrations!
Massive Audio CT 1a

1" (25mm) Aluminum Dome Tweeters

CT 1A main
Go to item page

1" (25mm) Aluminum Dome Tweeters

1" CT Series Dome Tweeters • 110W Max • 60W RMS • 1" Aluminum Dome Tweeter • 4 Ohms Impedance • Flexible Mounting Options • Neodymium Magnet • 12 dB Poly Switch Crossovers

1
Massive Audio CT 1a

1" (25mm) Aluminum Dome Tweeters

Special order

Ships at Later Date

$74.99 (20.00% off)
$59.99

PAIR

Massive Audio PAT250 (Open Box, Complete)

140W Max (70W RMS) 1-3/8" Screw On PAT Series Pro Audio Midrange Driver

PAT 250 main
Go to item page

140W Max (70W RMS) 1-3/8" Screw On PAT Series Pro Audio Midrange Driver

• 140W Max Each, 70W RMS Each
• Field-replaceable voice coil
• Phenlonic diaphragm
• 8 ohms Impedance
• Sensitivity: 107dB
• Ferrofluid cooled

Massive Audio PAT250 (Open Box, Complete)

140W Max (70W RMS) 1-3/8" Screw On PAT Series Pro Audio Midrange Driver

In stock

$42.49 (28.01% off)
$30.59
Massive Audio T40 (Sold Individually)

25.4mm Voice Coil 120W Max (60W RMS) Surface Mount Bullet Tweeter

T40 main
Go to item page

25.4mm Voice Coil 120W Max (60W RMS) Surface Mount Bullet Tweeter

• 25.4mm Voice Coil Car Tweeters
• Aluminum Ferrite Bullet Tweeter
• 120W Max
• 60W RMS
• 4 ohms Impedance
• 18dB Crossover Recommended
• Field Replaceable Voice Coil
• High Grade Ferrite Magnet

Massive Audio T40 (Sold Individually)

25.4mm Voice Coil 120W Max (60W RMS) Surface Mount Bullet Tweeter

In stock

$49.99 (14.00% off)
$42.99
Hide info
More info Item page
1 Special offer
  • FREE Sound Damping Kit to stop the rattles/vibrations!
Massive Audio T50 (Sold Individually)

44.4mm Voice Coil 120W Max (60W RMS) Flush Mount Bullet Tweeter

T50 main
Go to item page

44.4mm Voice Coil 120W Max (60W RMS) Flush Mount Bullet Tweeter

• 44.4mm Voice Coil Car Tweeter
• Aluminum Bullet Tweeter
• 120W Max
• 60W RMS
• 8 ohms Impedance
• 18dB Crossover Recommended
• Field Replaceable CCAW Voice Coil
• High Grade Ferrite Magnet

Massive Audio T50 (Sold Individually)

44.4mm Voice Coil 120W Max (60W RMS) Flush Mount Bullet Tweeter

In stock

$59.99 (25.00% off)
$44.99
Hide info
More info Item page
1 Special offer
  • FREE Sound Damping Kit to stop the rattles/vibrations!
Massive Audio MT1 (Sold Individually)

4" 700W Max Flush Mount Bullet Tweeter

MT1 main
Go to item page

4" 700W Max Flush Mount Bullet Tweeter

• 4" Car Tweeters
• Aluminum Bullet Tweeter
• 350W Max
• 175W RMS
• 4 ohms Impedance
• 18dB Crossover Recommended
• Ferrofluid Cooled CCAW Voice Coil
• Neodymium Magnet

Massive Audio MT1 (Sold Individually)

4" 700W Max Flush Mount Bullet Tweeter

In stock

Only 1 Left!

$89.99 (22.22% off)
$69.99
Hide info
More info Item page
1 Special offer
  • Get 50% off Sound Damping to stop the rattles/vibrations!
Massive Audio PAT 400 (Sold Individually)

800W Max (200W RMS) 2" Bolt On PAT Series Pro Audio Compression Driver

PAT 400 main
Go to item page

800W Max (200W RMS) 2" Bolt On PAT Series Pro Audio Compression Driver

• 800W Max Each, 200W RMS Each
• Ferrofluid Cooled
• Field Replaceable Voice Coil
• 8 ohms Impedance
• Sensitivity: 116dB
• High Grade Ferrite Magnet

Massive Audio PAT 400 (Sold Individually)

800W Max (200W RMS) 2" Bolt On PAT Series Pro Audio Compression Driver

Special order

Ships at Later Date

$189.99 (21.05% off)
$149.99
Massive Audio PAT 300 (Sold Individually)

500W Max (100W RMS) 2" PAT Series Bolt On Pro Audio Compression Driver

PAT 300 main
Go to item page

500W Max (100W RMS) 2" PAT Series Bolt On Pro Audio Compression Driver

• 500W Max Each, 100W RMS Each
• Ferrofluid Cooled
• Field Replaceable Voice Coil
• 8 ohms Impedance
• Sensitivity: 111dB
• High Grade Ferrite Magnet

Massive Audio PAT 300 (Sold Individually)

500W Max (100W RMS) 2" PAT Series Bolt On Pro Audio Compression Driver

In stock

Only 2 Left!

$134.99 (22.22% off)
$104.99
Massive Audio MA (Open Box, Complete)

44.4mm Voice Coil 120W Max (60W RMS) Surface Mount Bullet Tweeter

T50 main
Go to item page

44.4mm Voice Coil 120W Max (60W RMS) Surface Mount Bullet Tweeter

• 44.4mm Voice Coil Car Tweeter
• Aluminum Bullet Tweeter
• 120W Max
• 60W RMS
• 8 ohms Impedance
• 18dB Crossover Recommended
• Field Replaceable CCAW Voice Coil
• High Grade Ferrite Magnet

Massive Audio MA (Open Box, Complete)

44.4mm Voice Coil 120W Max (60W RMS) Surface Mount Bullet Tweeter

In stock

$59.99 (32.51% off)
$40.49

Massive Audio Tweeters Information

With improved clarity and high temperature voice coils, Massive Audio tweeters are a must have for your audio system. With surface and flush mounting options available, these small speakers offer crisp sounds. When you think of tweeters, think of Massive Audio.
    clear all items