Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Cadence Store
  3. Discontinued Cadence Car Audio & Electronics
  4. Discontinued Cadence Car Amplifiers
  5. Discontinued Cadence Monoblock Amplifiers

Discontinued Cadence Monoblock Amplifiers

Match Amps to Subs
Filters
Cadence ✕
Clear Filters
Reset Done
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Cadence Q3001D

300W RMS Q Series 1-ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

Q3001D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Q3001D

300W RMS Q Series 1-ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

• 140 Watts RMS x 1 @ 4 ohm
• 230 Watts RMS x 1 @ 2 ohm
• 300 Watts RMS x 1 @ 1 ohm
• Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 7.1" W x 11.9" L x 2.05" H

• 140 Watts RMS x 1 @ 4 ohm
• 230 Watts RMS x 1 @ 2 ohm
• 300 Watts RMS x 1 @ 1 ohm
• Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 7.1" W x 11.9" L x 2.05" H

Cadence Momentum CSA3000.1

1000W Monoblock Momentum CSA Series Class AB Amplifier

CSA3000.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Momentum CSA3000.1

1000W Monoblock Momentum CSA Series Class AB Amplifier

• RMS: 250W x 1 @ 4 ohm, 500W x 1 @ 2 ohm,
• Total Peak Power: 1000W
• High Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors for Smooth Audio Response
• Preamp RCA outputs to daisy chain multiple amps
• 8.00" W x 11.50" L x 2.00" H

• RMS: 250W x 1 @ 4 ohm, 500W x 1 @ 2 ohm,
• Total Peak Power: 1000W
• High Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors for Smooth Audio Response
• Preamp RCA outputs to daisy chain multiple amps
• 8.00" W x 11.50" L x 2.00" H

Cadence XAH300.1 (Orange)

600W, Xenith Series Class A/B Monoblock Amplifier with Orange Chassis

XAH300.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence XAH300.1 (Orange)

600W, Xenith Series Class A/B Monoblock Amplifier with Orange Chassis

Xenith Series Monoblock Class A/B Car Amplifier with Orange Chassis • 200W RMS x 1 Chan. @ 4 ohm • 300W RMS x 1 Chan. @ 2 ohm • Preamp RCA Outputs • MOSFET Power Supply • 4-Way System Protection Circuitry • Variable Low-Pass Crossovers • Selectable Bass Boost

Xenith Series Monoblock Class A/B Car Amplifier with Orange Chassis • 200W RMS x 1 Chan. @ 4 ohm • 300W RMS x 1 Chan. @ 2 ohm • Preamp RCA Outputs • MOSFET Power Supply • 4-Way System Protection Circuitry • Variable Low-Pass Crossovers • Selectable Bass Boost

Cadence Momentum CSA5000.1

2400W Monoblock Momentum CSA Series Class D Amplifier

CSA5000.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Momentum CSA5000.1

2400W Monoblock Momentum CSA Series Class D Amplifier

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2400W
• High Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors for Smooth Audio Response
• Preamp RCA outputs to daisy chain multiple amps
• 8.00" W x 10.70" L x 2.00" H

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2400W
• High Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors for Smooth Audio Response
• Preamp RCA outputs to daisy chain multiple amps
• 8.00" W x 10.70" L x 2.00" H

Cadence Q6000M

800W Monoblock Q Series Class A/B Car Amplifier

Q6000m big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Q6000M

800W Monoblock Q Series Class A/B Car Amplifier

• RMS: 300W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 800W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 10.9" L x 7.9" W x 2.4 H

• RMS: 300W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 800W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 10.9" L x 7.9" W x 2.4 H

Cadence Q8000M

1600W Monoblock Q Series Class A/B Car Amplifier

Q8000m big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Q8000M

1600W Monoblock Q Series Class A/B Car Amplifier

• RMS: 500W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• Total Peak Power: 1600W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 19.2" L x 7.9" W x 2.4 H

• RMS: 500W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• Total Peak Power: 1600W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 19.2" L x 7.9" W x 2.4 H

Cadence Q7000M

1200W Monoblock Q Series Class A/B Car Amplifier

Q7000m big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Q7000M

1200W Monoblock Q Series Class A/B Car Amplifier

• RMS: 400W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total Peak Power: 1200W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 13.7" L x 7.9" W x 2.4 H

• RMS: 400W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total Peak Power: 1200W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 13.7" L x 7.9" W x 2.4 H

Cadence Q9000M

2400W Monoblock Q Series Class D Car Amplifier

Q9000m big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Q9000M

2400W Monoblock Q Series Class D Car Amplifier

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 1200W x 1 @ 1ohm
• Total Peak Power: 2400W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 13.7" L x 7.9" W x 2.4 H

1

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 1200W x 1 @ 1ohm
• Total Peak Power: 2400W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• 24dB Crossover Circuitry
• BiPolar Professional Audio Grade Output Transistors
• 13.7" L x 7.9" W x 2.4 H

Cadence FXA1500.1

1500W Monoblock Flash (FXA) Series Class A/B Car Amplifier

FXA1500.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence FXA1500.1

1500W Monoblock Flash (FXA) Series Class A/B Car Amplifier

• RMS: 250W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 1500W
• High Speed MosFET Power Supply
• Monoblock Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 12.4" L x 9.1" W x 2.1 H

1

• RMS: 250W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 1500W
• High Speed MosFET Power Supply
• Monoblock Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 12.4" L x 9.1" W x 2.1 H

Cadence QRS 1.600GH

600W RMS QRS Series 2 ohm Stable Monoblock Class-GH Amplifier w/ Remote Bass Knob Included

QRS 1.600GH big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence QRS 1.600GH

600W RMS QRS Series 2 ohm Stable Monoblock Class-GH Amplifier w/ Remote Bass Knob Included

• 400 Watts RMS x 2 @ 4 ohm
• 600 Watts RMS x 2 @ 2 ohm
• Low Pass and Subsonic Filters
• 0-15dB Bass Boost
• Aluminum Heatsink
• Dimensions: 13.78" W x 7.56" L x 2.32" H

• 400 Watts RMS x 2 @ 4 ohm
• 600 Watts RMS x 2 @ 2 ohm
• Low Pass and Subsonic Filters
• 0-15dB Bass Boost
• Aluminum Heatsink
• Dimensions: 13.78" W x 7.56" L x 2.32" H

Cadence FXA2500.1D Open Box Complete

2500W Monoblock Flash (FXA) Series Class D Car Amplifier

FXA2500.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence FXA2500.1D Open Box Complete

2500W Monoblock Flash (FXA) Series Class D Car Amplifier

• Item Condition: Open Box Complete
• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 900W x 1 @ 1 ohm
• Total Peak Power: 2500W
• High Speed MosFET Power Supply
• Monoblock Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 11.7" L x 9.1" W x 2.1 H

• Item Condition: Open Box Complete
• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 900W x 1 @ 1 ohm
• Total Peak Power: 2500W
• High Speed MosFET Power Supply
• Monoblock Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 11.7" L x 9.1" W x 2.1 H

Cadence FXA2500.1D

2500W Monoblock Flash (FXA) Series Class D Car Amplifier

FXA2500.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence FXA2500.1D

2500W Monoblock Flash (FXA) Series Class D Car Amplifier

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 900W x 1 @ 1 ohm
• Total Peak Power: 2500W
• High Speed MosFET Power Supply
• Monoblock Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 11.7" L x 9.1" W x 2.1 H

Promo Savings Icon

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 900W x 1 @ 1 ohm
• Total Peak Power: 2500W
• High Speed MosFET Power Supply
• Monoblock Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 11.7" L x 9.1" W x 2.1 H

Cadence XAH400.1 (Orange)

850W, Xenith Series Class A/B Monoblock Amplifier with Orange Chassis

XAH400.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence XAH400.1 (Orange)

850W, Xenith Series Class A/B Monoblock Amplifier with Orange Chassis

Xenith Series Monoblock Class A/B Car Amplifier with Orange Chassis • 300W RMS x 1 Chan. @ 4 ohm • 4250W RMS x 1 Chan. @ 2 ohm • Preamp RCA Outputs • MOSFET Power Supply • 4-Way System Protection Circuitry • Variable Low-Pass Crossovers • Selectable Bass Boost

Xenith Series Monoblock Class A/B Car Amplifier with Orange Chassis • 300W RMS x 1 Chan. @ 4 ohm • 4250W RMS x 1 Chan. @ 2 ohm • Preamp RCA Outputs • MOSFET Power Supply • 4-Way System Protection Circuitry • Variable Low-Pass Crossovers • Selectable Bass Boost

Cadence Olympia

2000W RMS, United Series Class D Monoblock Car Amplifier

Olympia big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Olympia

2000W RMS, United Series Class D Monoblock Car Amplifier

United Series Monoblock Class D Car Amplifier • 500W RMS @ 4 ohm • 1000W RMS @ 2 ohm • 2000W RMS @ 1 ohm • Wired Bass Remote Included • Variable Low Crossover • RCA Preamp Line Output • Phase Control Switch • Variable Bass Boost • Exclusive "Peak Limiter Circuitry"

1

United Series Monoblock Class D Car Amplifier • 500W RMS @ 4 ohm • 1000W RMS @ 2 ohm • 2000W RMS @ 1 ohm • Wired Bass Remote Included • Variable Low Crossover • RCA Preamp Line Output • Phase Control Switch • Variable Bass Boost • Exclusive "Peak Limiter Circuitry"

Cadence XAM600.1

1200W Monoblock Xenith (XAM) Series Class D Car Amplifier

XAM600.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence XAM600.1

1200W Monoblock Xenith (XAM) Series Class D Car Amplifier

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total Peak Power: 1200W
• Cadence Tech Digital Amplifier
• Top Mount Backlit Plexiglass control area
• Aluminum Extruded Chassis
• 11.18" L x 5.00" W x 2.00" H

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total Peak Power: 1200W
• Cadence Tech Digital Amplifier
• Top Mount Backlit Plexiglass control area
• Aluminum Extruded Chassis
• 11.18" L x 5.00" W x 2.00" H

Cadence ZRS C1

4500W Peak (2250W RMS) ZRS Series Type C1 Class-D Monoblock 1-Ohm Stable Competition Amplifier

ZRS C1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence ZRS C1

4500W Peak (2250W RMS) ZRS Series Type C1 Class-D Monoblock 1-Ohm Stable Competition Amplifier

• RMS: 800W x 1 @ 4 ohm, 1400W x 1 @ 2 ohm, 2250W x 1 @ 1 ohm
• Total Peak Power: 4500W
• Twin Amp Bridgeable for 2x Power Output
• 16V Capable Power Supply
• Bipolar Japanese Sanken Outputs
• 11.6"W x 20"L x 2.7" H

• RMS: 800W x 1 @ 4 ohm, 1400W x 1 @ 2 ohm, 2250W x 1 @ 1 ohm
• Total Peak Power: 4500W
• Twin Amp Bridgeable for 2x Power Output
• 16V Capable Power Supply
• Bipolar Japanese Sanken Outputs
• 11.6"W x 20"L x 2.7" H

Cadence Dakota

2400W Peak (1200W RMS) United Series Class D 1-Ohm Stable Monoblock Car Amplifier

Dakota big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Dakota

2400W Peak (1200W RMS) United Series Class D 1-Ohm Stable Monoblock Car Amplifier

• United Series Monoblock Class D Car Amplifier
• 400W RMS @ 4 ohm
• 600W RMS @ 2 ohm
• 1200W RMS @ 1 ohm
• Wired Bass Remote Included
• Variable Low Crossover
• RCA Preamp Line Output
• Phase Control Switch
• Variable Bass Boost
• Exclusive "Peak Limiter Circuitry"

• United Series Monoblock Class D Car Amplifier
• 400W RMS @ 4 ohm
• 600W RMS @ 2 ohm
• 1200W RMS @ 1 ohm
• Wired Bass Remote Included
• Variable Low Crossover
• RCA Preamp Line Output
• Phase Control Switch
• Variable Bass Boost
• Exclusive "Peak Limiter Circuitry"

Cadence Phoenix

1200W RMS, United Series Class D Monoblock Car Amplifier

Phoenix big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence Phoenix

1200W RMS, United Series Class D Monoblock Car Amplifier

United Series Monoblock Class D Car Amplifier • 800W RMS @ 4 ohm • 1200W RMS @ 2 ohm • Wired Bass Remote Included • Variable Low Crossover • RCA Preamp Line Output • Phase Control Switch • Variable Bass Boost • Exclusive "Peak Limiter Circuitry"

2

United Series Monoblock Class D Car Amplifier • 800W RMS @ 4 ohm • 1200W RMS @ 2 ohm • Wired Bass Remote Included • Variable Low Crossover • RCA Preamp Line Output • Phase Control Switch • Variable Bass Boost • Exclusive "Peak Limiter Circuitry"

Cadence XaH1200D (Orange)

2400W, Xenith Series Class D Monoblock Amplifier with Orange Chassis

XAH1200D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence XaH1200D (Orange)

2400W, Xenith Series Class D Monoblock Amplifier with Orange Chassis

Xenith Series Monoblock Class D Car Amplifier with Orange Chassis • 300W RMS x 1 Chan. @ 4 ohm • 600W RMS x 1 Chan. @ 2 ohm • 1200W RMS x 1 Chan. @ 1 ohm • MOSFET Power Supply • 4-Way System Protection Circuitry • Variable Low-Pass Crossovers • Variable Bass Boost

1

Xenith Series Monoblock Class D Car Amplifier with Orange Chassis • 300W RMS x 1 Chan. @ 4 ohm • 600W RMS x 1 Chan. @ 2 ohm • 1200W RMS x 1 Chan. @ 1 ohm • MOSFET Power Supply • 4-Way System Protection Circuitry • Variable Low-Pass Crossovers • Variable Bass Boost

Cadence QRS 1.1800D

1800W RMS QRS Series 1 ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

QRS 1.1800D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cadence QRS 1.1800D

1800W RMS QRS Series 1 ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included

• 800 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• 1800 Watts RMS x 1 @ 1 ohm
• Low Pass and Subsonic Filters
• 0-15 Bass BOost
• Aluminum Heatsink
• Dimensions: 15.55" W x 7.56" L x 2.32" H

• 800 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• 1800 Watts RMS x 1 @ 1 ohm
• Low Pass and Subsonic Filters
• 0-15 Bass BOost
• Aluminum Heatsink
• Dimensions: 15.55" W x 7.56" L x 2.32" H

1 2 Next

Items per page: 20 40 60

    Clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2016 Chevrolet Equinox

    2015 Alfa Romeo 4C

    2004 Toyota Sequoia

    1986 Dodge Daytona

    2010 Mitsubishi Outlander

    1961 Chrysler Windsor

    1986 Jeep CJ7

    1985 Mazda RX-7

    2025 Toyota Corolla

    2009 Chrysler PT Cruiser

    Vehicle
    Store     Delete

    2007 Harley Davidson FXDC Super Glide Custom

    2007 Harley Davidson FLHTC Electra Glide Classic

    Vehicle
    Store     Delete

    2018 Can-Am Defender MAX HD8

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2016 Equinox
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo