All Sound Storm Labs (SSL) Component Car Subwoofers

filter-icon Filters & Sort
Loading...
Filters
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Refers to the diameter of the subwoofer, measured in inches.
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
This is the color of the speaker's or subwoofer's cone.
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Sound Storm Labs (SSL) SS12

800W Peak (400W RMS) 12” 4 Ohm Single Voice coil Subwoofer

SS12 main
Go to item page

800W Peak (400W RMS) 12” 4 Ohm Single Voice coil Subwoofer

• Peak Power: 800 watts
• RMS Power: 400 watts
• Polypropylene Cone
• Foam Surround
• Impedance: Single 4 ohms
• Mount depth: 4-1/8"
• Sensitivity: 89 dB

shipping truck icon
Fast 2-day shipping to VA. Get it Tue, Mar. 28

empty

4
List $54.00
$39.99

In stock

Only 1 Left!

• Peak Power: 800 watts
• RMS Power: 400 watts
• Polypropylene Cone
• Foam Surround
• Impedance: Single 4 ohms
• Mount depth: 4-1/8"
• Sensitivity: 89 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Sound Storm Labs (SSL) SS8

400W Peak (200W RMS) 8" SS Series Single 4-Ohm Car Subwoofer

SS8 main
Go to item page

400W Peak (200W RMS) 8" SS Series Single 4-Ohm Car Subwoofer

• Peak Power: 400 watts
• RMS Power: 200 watts
• Injection Molded Polypropylene - IMPP Cone
• Foam Surround
• Impedance: Single 4 ohms
• Mount depth: 3.45"
• Sensitivity: 87 dB

shipping truck icon
Fast 2-day shipping to VA. Get it Tue, Mar. 28

empty

6
List $49.99
$29.99

In stock

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Sound Storm Labs (SSL) SS10

600W Peak (300W RMS) 10" SS Series Single 4-Ohm Car Subwoofer

SS10 main
Go to item page

600W Peak (300W RMS) 10" SS Series Single 4-Ohm Car Subwoofer

• Peak Power: 600 watts
• RMS Power: 300 watts
• Fiber Injection Cone
• Foam Surround
• Impedance: Single 4 ohms
• Mount depth: 4-1/8"
• Sensitivity: 88 dB

shipping truck icon
Fast 2-day shipping to VA. Get it Tue, Mar. 28

empty

8
List $44.00
$39.99

In stock

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Sound Storm Labs (SSL) CG12D

1,200W Peak (600W RMS) 12” 4 Ohm Dual Voice coil Subwoofer

CG12D main
Go to item page

1,200W Peak (600W RMS) 12” 4 Ohm Dual Voice coil Subwoofer

• 1200 watts Max
• 600 watts RMS
• Polypropylene Cone
• Foam Surround

shipping truck icon
FREE shipping to VA. Get it Fri, Mar. 31

empty

1
List $59.99
$52.99

Available

Ships in 10-14 days

• 1200 watts Max
• 600 watts RMS
• Polypropylene Cone
• Foam Surround

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
Sound Storm Labs (SSL) CG10D

1000W Peak (500W RMS) 10” Dual 4-Ohm Subwoofer

CG10D main
Go to item page

1000W Peak (500W RMS) 10” Dual 4-Ohm Subwoofer

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Polypropylene Cone
• Foam Surround
• Impedance: Dual 4 ohms
• Mount depth: 4.75"
• Sensitivity: 88 dB

shipping truck icon
FREE shipping to VA. Get it Fri, Mar. 31

empty

List $59.99
$49.99

Available

Ships in 10-14 days

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Polypropylene Cone
• Foam Surround
• Impedance: Dual 4 ohms
• Mount depth: 4.75"
• Sensitivity: 88 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Sound Storm Labs (SSL) CG8D

800W Peak (400W RMS) 8” Dual 4-Ohm Car Subwoofer

Go to item page

800W Peak (400W RMS) 8” Dual 4-Ohm Car Subwoofer

• Peak Power: 800 watts
• RMS Power: 400 watts
• Polypropylene Cone
• Foam Surround
• Impedance: Dual 4 ohms
• Mount depth: 3.75"
• Sensitivity: 87 dB

empty

List $49.99
$39.99

• Peak Power: 800 watts
• RMS Power: 400 watts
• Polypropylene Cone
• Foam Surround
• Impedance: Dual 4 ohms
• Mount depth: 3.75"
• Sensitivity: 87 dB

Item Added to Cart.

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
Six Function Digital Multimeter

Perfect addition to any toolbox

$8.99

Add
2 x Sound Storm Labs (SSL) SS12

2 x 800W 12" SS Series Single 4 ohm Subwoofers

Go to item page

2 x 800W 12" SS Series Single 4 ohm Subwoofers

• Pair of 12" Single 4 ohm SS Series Subwoofers
•Black poly injection cone
• Foam surround
• Foam surround
• 1.5" aluminum voice coil
• Top-mount depth: 4.875"
• Sensitivity: 89dB

empty

4
List $108.00
$79.98

• Pair of 12" Single 4 ohm SS Series Subwoofers
•Black poly injection cone
• Foam surround
• Foam surround
• 1.5" aluminum voice coil
• Top-mount depth: 4.875"
• Sensitivity: 89dB

Item Added to Cart.

50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$69.99

Add
    clear all items
    Related Categories

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?

    Add vehicle

    Save up to 10 different vehicles in your garage

    Loading...
    < Back