Sound Storm Labs (SSL) Car Amplifier Packages & Bundles

filter-icon Filters & Sort
Loading...
Filters

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

The lowest impedance the amplifier will handle when it is not bridged.
The lowest impedance the amplifier will handle when it is bridged.
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Sound Storm Labs (SSL) EVO4000.1 4000W Class D Amplifier + Amp Kit + Remote

4000W Max (3000W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included

BAK42BK,EVO4000.1 main
Go to item page

4000W Max (3000W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• 3000W RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Built-In Low Pass and Subsonic Filters
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 14.69" L x 2.3" H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

30
List $326.99
$264.94

In stock

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• 3000W RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Built-In Low Pass and Subsonic Filters
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 14.69" L x 2.3" H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EV1500M Amplifier + Belva 1/0 Gauge Amp Kit

1500W Max, Evolution Series Monoblock Class AB Power Car Amplifier

EV1500M, BAK02 main
Go to item page

1500W Max, Evolution Series Monoblock Class AB Power Car Amplifier

• 600W x 1 Chan. @ 4 Ohms
• 1500W x 1 Chan. @ 2 Ohms
• Speaker Short Protection
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

49
List $229.98
$149.99

In stock

• 600W x 1 Chan. @ 4 Ohms
• 1500W x 1 Chan. @ 2 Ohms
• Speaker Short Protection
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) CG30001D + Belva 4 Gauge Amp Wiring Kit

Charge 3000W Monoblock Full Range Class D Subwoofer Audio Amplifier

CG30001D, BAK42 main
Go to item page

Charge 3000W Monoblock Full Range Class D Subwoofer Audio Amplifier

• 563 Watts RMS x 1 @ 4 ohms
• 1125 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 3000 Watts
• CEA-2006 Compliant
• MOSFET Power Supply
• Dimensions: 6.5"W x 13.7"L x 2.5"H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

31
List $259.98
$175.99

In stock

Only 2 Left!

• 563 Watts RMS x 1 @ 4 ohms
• 1125 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 3000 Watts
• CEA-2006 Compliant
• MOSFET Power Supply
• Dimensions: 6.5"W x 13.7"L x 2.5"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
SSL EV2.1000 with Amplifier Wiring Kit

1000W Peak Evolution Series 2-Channel Full Range A/B Amplifier with Remote Subwoofer Level Control

EV2.1000, BAK42 main
Go to item page

1000W Peak Evolution Series 2-Channel Full Range A/B Amplifier with Remote Subwoofer Level Control

• RMS: 4 ohms: 200 watts x 2 chan
• Pulse Width Modulated MOSFET Power Supply
• Bass Remote Level Control Included
• Variable Bass Boost
• 2-Way System Protection Circuitry
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

45
List $184.98
$120.95

In stock

• RMS: 4 ohms: 200 watts x 2 chan
• Pulse Width Modulated MOSFET Power Supply
• Bass Remote Level Control Included
• Variable Bass Boost
• 2-Way System Protection Circuitry
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
SSL EV400.4 with Amplifier Wiring Kit

400W (75w RMS) Evolution Series 2 ohm Stable 4-Channel Class A/B Amplifier

EV400.4, BAK84 main
Go to item page

400W (75w RMS) Evolution Series 2 ohm Stable 4-Channel Class A/B Amplifier

• Power: 50W x 4 @ 4 ohms, 100W x 4 @ 2 ohms
• Total Peak Power: 400W
• Fixed Low and High Pass Filters
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

19
List $159.98
$79.99

In stock

• Power: 50W x 4 @ 4 ohms, 100W x 4 @ 2 ohms
• Total Peak Power: 400W
• Fixed Low and High Pass Filters
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EVO4000.1 + Belva 1/0 Amp Gauge Kit

4000W Max (3000W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included

EVO4000.1, BAK02 main
Go to item page

4000W Max (3000W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• 3000W RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Built-In Low Pass and Subsonic Filters
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 14.69" L x 2.3" H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

53
List $336.99
$271.03

In stock

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• 3000W RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Built-In Low Pass and Subsonic Filters
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 14.69" L x 2.3" H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
SSL EV4.1000 with Amplifier Wiring Kit

1000W 4 Channel Evolution Series Class A/B Amplifier

EV4.1000, BAK84 main
Go to item page

1000W 4 Channel Evolution Series Class A/B Amplifier

• 125 Watts RMS x 4 @ 4 ohms
• 200 Watts RMS x 4 @ 2 ohms
• 400 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• 4, 3 or 2 channel operation
• Includes Wired remote bass level control
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

18
List $192.99
$130.99

In stock

• 125 Watts RMS x 4 @ 4 ohms
• 200 Watts RMS x 4 @ 2 ohms
• 400 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• 4, 3 or 2 channel operation
• Includes Wired remote bass level control
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EVO2500.1 + Belva 1/0 Gauge Amp Kit

2500W EVOLUTION Series Monoblock Class A/B Car Amplifier

EVO2500.1, BAK02 main
Go to item page

2500W EVOLUTION Series Monoblock Class A/B Car Amplifier

• 1250W x 1 Chan. @ 4 Ohms
• 2500W x 1 Chan. @ 2 Ohms
• Peak Power: 2500W
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

59
List $263.99
$202.50

In stock

Only 1 Left!

• 1250W x 1 Chan. @ 4 Ohms
• 2500W x 1 Chan. @ 2 Ohms
• Peak Power: 2500W
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EV2500M + Belva 4 Gauge Amp Wiring Kit

2500W Evolution Series Class A/B Monoblock Car Amplifier

EV2500M, BAK42BK main
Go to item page

2500W Evolution Series Class A/B Monoblock Car Amplifier

• RMS Power: 1250W x 2 @ 4 ohms, 2500W x 1 @ 2 ohms
• Variable Bass Boost
• Mono Channel Operation
• 10"W x 15.5"L x 2.25"H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

32
List $236.98
$190.99

In stock

Only 1 Left!

• RMS Power: 1250W x 2 @ 4 ohms, 2500W x 1 @ 2 ohms
• Variable Bass Boost
• Mono Channel Operation
• 10"W x 15.5"L x 2.25"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EV5000D + Belva 4 Gauge Amp Wiring Kit

5000W Peak Evolution Series Class-D Monoblock 1-Ohm Stable Amplifier

EV5000D, BAK42BK main
Go to item page

5000W Peak Evolution Series Class-D Monoblock 1-Ohm Stable Amplifier

• RMS: 1800W x 1 @ 4 ohms, 2500W x 1 @ 2 ohms
• Peak: 2200W x 1 @ 4 ohms, 3500W x 1 @ 2 ohms, 5000W x 1 @ 1 ohm
• Wired Bass Level Remote
• Bass Boost: 0-18 dB
• DataLink Cable for Connecting Two Evolution Amps
• Dimensions: 10"D x 19-1/2"W x 2-3/8"H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

73
List $479.98
$309.99

In stock

Only 2 Left!

• RMS: 1800W x 1 @ 4 ohms, 2500W x 1 @ 2 ohms
• Peak: 2200W x 1 @ 4 ohms, 3500W x 1 @ 2 ohms, 5000W x 1 @ 1 ohm
• Wired Bass Level Remote
• Bass Boost: 0-18 dB
• DataLink Cable for Connecting Two Evolution Amps
• Dimensions: 10"D x 19-1/2"W x 2-3/8"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EVO2000.1 + Belva 4 Gauge Amp Wiring Kit

2000W Max (1500W RMS) EVO Series Class-A/B Monoblock 2 Ohm Stable Amplifier with Bass Knob Included

EVO2000.1, BAK42 main
Go to item page

2000W Max (1500W RMS) EVO Series Class-A/B Monoblock 2 Ohm Stable Amplifier with Bass Knob Included

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• Total Peak Power: 2000W
• Variable Low Pass Filter
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 12.1" L x 2.3" H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

30
List $229.99
$194.98

In stock

Only 2 Left!

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• Total Peak Power: 2000W
• Variable Low Pass Filter
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 12.1" L x 2.3" H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) CG1202 + Belva 4 Gauge Amp Wiring Kit

Charge 1200W 2 Channel Full Range Class A/B Subwoofer Audio Amplifier

CG1202, BAK42 main
Go to item page

Charge 1200W 2 Channel Full Range Class A/B Subwoofer Audio Amplifier

• 225 Watts RMS x 2 @ 4 ohms
• 450 Watts RMS x 2 @ 2 ohms
• Total Peak Power: 1200 Watts
• CEA-2006 Compliant
• MOSFET Power Supply
• Dimensions: 6.5"W x 11.7"L x 2.5"H

shipping truck icon
FREE 3-day shipping to VA. Get it Sat, Apr. 1

empty

30
List $209.98
$120.99

In stock

• 225 Watts RMS x 2 @ 4 ohms
• 450 Watts RMS x 2 @ 2 ohms
• Total Peak Power: 1200 Watts
• CEA-2006 Compliant
• MOSFET Power Supply
• Dimensions: 6.5"W x 11.7"L x 2.5"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EV4.1600 + Belva 4 Gauge Amp Wiring Kit

1600W Max, Evolution Series 4-Channel Class AB Car Amplifier with Remote Level Control

Go to item page

1600W Max, Evolution Series 4-Channel Class AB Car Amplifier with Remote Level Control

• 180W x 4 Chan. @ 4 Ohms
• 400W x 4 Chan. @ 2 Ohms
• 1600W Max Bridged
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

empty

16
List $329.98
$178.99

• 180W x 4 Chan. @ 4 Ohms
• 400W x 4 Chan. @ 2 Ohms
• 1600W Max Bridged
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EV3000D + Belva 4 Gauge Amp Wiring Kit

3000W Max Evolution Series Class D Monoblock Amplifier with Bass Remote

Go to item page

3000W Max Evolution Series Class D Monoblock Amplifier with Bass Remote

• 563 Watts RMS x 1 @ 4 ohms
• 1125 Watts RMS x 1 @ 2 ohms
• 2250 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 3000 Watts
• Variable Bass Boost: 0 to +18 dB bass boost at 50 Hz
• Large aluminum heatsink for excellent heat dissipation
• 12.688"L x 10"W x 2.3"H

empty

54
List $319.98
$204.99

• 563 Watts RMS x 1 @ 4 ohms
• 1125 Watts RMS x 1 @ 2 ohms
• 2250 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 3000 Watts
• Variable Bass Boost: 0 to +18 dB bass boost at 50 Hz
• Large aluminum heatsink for excellent heat dissipation
• 12.688"L x 10"W x 2.3"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) CG1501M + Belva BAK02

Charge 1500W Monoblock Full Range Class A/B Subwoofer Audio Amplifier + Belva 1/0 Gauge Amp Wiring Kit

Go to item page

Charge 1500W Monoblock Full Range Class A/B Subwoofer Audio Amplifier + Belva 1/0 Gauge Amp Wiring Kit

• 563 Watts RMS x 1 @ 4 ohms
• 1125 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1500 Watts
• CEA-2006 Compliant
• MOSFET Power Supply
• Dimensions: 6.5"W x 11.7"L x 2.5"H

empty

54
List $142.98
$138.98

• 563 Watts RMS x 1 @ 4 ohms
• 1125 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1500 Watts
• CEA-2006 Compliant
• MOSFET Power Supply
• Dimensions: 6.5"W x 11.7"L x 2.5"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
Sound Storm Labs (SSL) EV4000D + Belva 1/0 Gauge Amp Wiring Kit

4000W Max, Evolution Series Class D Monoblock Power Amplifier

Go to item page

4000W Max, Evolution Series Class D Monoblock Power Amplifier

• RMS: 750 x 1 @ 4 ohms
• Wired Bass Level Remote
• Bass Boost: 0-18 dB
• DataLink Cable for Connecting Two Evolution Amps
• Dimensions: 10"D x 15"W x 2-3/8"H

empty

81
List $419.98
$271.50

• RMS: 750 x 1 @ 4 ohms
• Wired Bass Level Remote
• Bass Boost: 0-18 dB
• DataLink Cable for Connecting Two Evolution Amps
• Dimensions: 10"D x 15"W x 2-3/8"H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
SSL EV200.2 with Amplifier Wiring Kit

200W 2-Channel Evolution Series Class A/B Mini Compact Amplifier

Go to item page

200W 2-Channel Evolution Series Class A/B Mini Compact Amplifier

• RMS: 50W x 2 @ 4 ohms
• Max: 100W x 2 @ 2 ohms
•Speaker-level (high-level) inputs
•Nickel-plated RCA low level inputs
• Includes Amplifier Wiring Kit

empty

64
List $97.99
$59.99

• RMS: 50W x 2 @ 4 ohms
• Max: 100W x 2 @ 2 ohms
•Speaker-level (high-level) inputs
•Nickel-plated RCA low level inputs
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
Sound Storm Labs (SSL) Evolution EV2.2000 + Belva 1/0 Gauge Amp Wiring Kit

2000W Max Evolution Series 2-Channel Class AB Car Amplifier with Remote Level Control

Go to item page

2000W Max Evolution Series 2-Channel Class AB Car Amplifier with Remote Level Control

• 350W x 2 Chan. @ 4 Ohms
• 1000W x 2 Chan. @ 2 Ohms
• 2000W Max Bridged
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

empty

68
List $289.98
$200.07

• 350W x 2 Chan. @ 4 Ohms
• 1000W x 2 Chan. @ 2 Ohms
• 2000W Max Bridged
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Sound Storm Labs (SSL) EVO5000.1 + Belva 4 Gauge Amp Wiring Kit

5000W Peak (3750W RMS) EVOLUTION Series Monoblock Class D 1-Ohm Stable Car Amplifier

Go to item page

5000W Peak (3750W RMS) EVOLUTION Series Monoblock Class D 1-Ohm Stable Car Amplifier

• 1750W x 1 Chan. @ 4 Ohms
• 3500W x 1 Chan. @ 2 Ohms
• 5000 x 1 Chan. @ 1 Ohms
• Peak Power: 5000W
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

empty

47
List $399.99
$319.99

• 1750W x 1 Chan. @ 4 Ohms
• 3500W x 1 Chan. @ 2 Ohms
• 5000 x 1 Chan. @ 1 Ohms
• Peak Power: 5000W
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
    clear all items
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?

    Add vehicle

    Save up to 10 different vehicles in your garage

    Loading...
    < Back