Find car audio that fits your 2020 Porsche Macan

---

• Rear & Front View Camera Inputs
• Optional coding of Park Assist to retrofit factory PDC
• Automatically switches screen to Rear-view when Reverse gear is engaged and to Front camera view when gear is engaged to drive
• Manual activation of the front camera using the steering wheel control button
• Plug & Play Installation
• Video in Motion function
• Dimension: 5" L x 2.5" W x 8.8" H

• Adds front and backup camera inputs plus an extra video input
• Uses the steering wheel control buttons or radio buttons to toggle between the inputs.
• Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics
• Interactive parking guide lines with calibration function. – Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines
• Built-in on-screen display and setup.
• Factory Audio Aux Input is required if video input will be used for AV sources
• Dimension: 5" L x 2.5" W x 8.8" H

• Rear-view Integration Interface to install a backup camera
• backup camera included
• Switches to rear-view camera when car is in reverse
• Plug and play installation
• Dimension: 5" L x 2.5" W x 8.8" H

• Plug-n-Play Backup Camera Interface Module
• Compatible with Select 2011 and Up Porsche Vehicles
• Allows Aftermarket Backup Camera to Integrate with the PCM3.1 Model Radios

• Radio to Antenna Adapter
• select 1998-2025 vehicles from BMW, Ford, Chevrolet Vehicles
• Factory radio with mini-style plug to universal antenna

• select 1998-2025 vehicles from Ford, BMW, Chevrolet Vehicles
• Aftermarket Antenna Female (Motorola Plug) to Factory Radio Male (Proprietary Plug)

• Rear-View Integration for Porsche Vehicles
• Compatible with Select Porsche Vehicles
• Plug and Play Installation

•Activates Reverse camera input in Audi, Porsche and Volkswagen vehicles with MIB2 systems.
• Rear-view camera input with timed deactivation setting
• Front camera input with timed activation/deactivation setting.
• HDMI and A/V Inputs.
• On-screen display and setup
• Dimension: 5" L x 2.5" W x 8.8" H

• Rear & Front View Camera Inputs
• Optional coding of ParkAssist to retrofit factory PDC
• Automatically switches screen to Rear-view when Reverse gear is engaged and to Front camera view when gear is engaged to drive
• Manual activation of the front camera using the steering wheel control button
• Plug & Play Installation
• Dimension: 5" L x 2.5" W x 8.8" H

• Provides 12-Volt accessory power (RAP)
• Compatible with non-amplified audio systems
• Retains the factory backup camera
• Pre-wired AXSWC harness (AXSWC sold separately)
• Micro-B USB Updatable

• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB

• 90 watts Peak Each, 45 watts RMS Each
• 1/2" Piezo pole-mounted Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 240 watts Peak Each, 80 watts RMS Each
• Hi-Res Audio-certified
• 1" Cloth Dome tweeters
• Polypropylene, Glass Fiber and Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB

• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 330 watts Peak Each, 110 watts RMS Each
• 3/4" Aluminum Edge Driven Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB

• 50 watts RMS Each
• 1" Silk Dome Tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• Peak Power: 150 watts Each
• RMS Power 75 watts Each
• 1" PEI (Polyetherimide) Dome tweeters
• Injection Molded Polypropylene cone
• Impedance: 4 ohm
• Sensitivity:

• 100 watts Peak Each, 50 watts RMS Each
• 1" Silk Dome tweeters
• Polypropylene cone material with reinforced stamped pattern
• Impedance: 4 ohm
• Sensitivity: 87 dB

• 110 watts Peak Each, 55 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material with Vertical Attach Surround Technique (VAST)
• Impedance: 4 ohm
• Sensitivity: 88 dB

• 100 watts Peak Each, 50 watts RMS Each
• PEI (Polyetherimide) Dome multi-direction pivot tweeters
• Graphite Reinforced Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB