







Access exclusive offers, news and more.
Thanks for signing up. You'll be the first to receive updates about new collections, top brands, and exclusive products.
• Acoustically seals speakers for better sound performance
• Prevents front and rear wave cancellation
• Reduces panels vibrations
• Foldable design allows for varying depths
Choose from any of our many bundles that include this product for even more savings!
NVX XBAF65 Speaker Baffle Kit + Sound Damping + 6 Piece Panel Removal Kit
Speaker Baffles + Sound Damping + 6 Piece Panel Removal Kit
(195)
$48.97
NVX 6.5" Speaker Installation Kit
Silicone 6.5" Speakers Baffles, Sound Dampening, Roller, and Door Panel Removal Kit
(280)
$62.96
• Acoustically seals speakers for better sound performance
• Prevents front and rear wave cancellation
• Reduces panels vibrations
• Foldable design allows for varying depths
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
• Acoustically seals speakers for better sound performance
• Prevents front and rear wave cancellation
• Reduces panels vibrations
• Easy peel and stick installation
$29.99
• Universal Speaker Baffles
• Works for 5-1/4" & 6-1/2" Speakers
• Durable ABS Plastic Construction
• Protects the Back of the Speaker
• Reduces Panel Vibration
• Blocks Road Noise
• Creates a Tight Acoustic Seal
(25)
$18.99
• F.A.S.T. Ring Kit for 6" and 6.5" Speakers
• Includes 3 piece foam speaker rings
• Acoustically seals speakers for better sound performance
• Absorbs rear wave, prevents front and rear wave cancellation and reduces panels vibrations
(23)
$20.99
• Foam Speaker Baffles
• For 6" x 9" Speakers
• Made from a Waterproof Foam
• Greatly Enhances the Sound and Performance of the Speakers
• Reduces Panel Vibration
(34)
$14.99
• Large Frame Speaker Baffles
• For 6-1/2" Speakers • Made from a Waterproof Foam
• Greatly Enhances the Sound and Performance of the Speakers
• Reduces Panel Vibration
(28)
$14.49
Speaker Installation Kit Includes NVX FRING65 + Belva 6Piece Panel Removal Kit
• 2pc Foam Speaker Ring Kit for 6.5" Drivers with Egg Crate Foam Base
• Creates a tight seal around your speaker for optimum sound quality
• Egg crate foam base helps absorb unwanted echoes and reverberation
• Compatible with 6.5" speakers
• Reduce door panel vibration
• Panel Removal Kit not Pictured to size
(101)
$29.48
• Small Frame Speaker Baffles
• For 6-1/2" Speakers
• Made from a Waterproof Foam
• Greatly Enhances the Sound and Performance of the Speakers
• Reduces Panel Vibration
(22)
$13.99
• 6.5" Acoustic Speaker Baffles
• Sold in Pairs
• Enhances sound quality of speakers
• Protects Rear of Speakers From Rain, etc.
• Trim for Enhanced Bass Response
(9)
$9.99
• Large Frame Speaker Baffles
• Made from a Waterproof Foam
• Greatly Enhances the Sound and Performance of the Speakers
• Reduces Panel Vibration
(18)
$14.99
Internal Product ID:
165461
5 star |
|
82% |
4 star |
|
12% |
3 star |
|
3% |
2 star |
|
0% |
1 star |
|
2% |
Durability |
|
4.9 |
Value |
|
4.9 |
Features |
|
4.8 |
Design |
|
4.9 |
Usability |
|
4.8 |
Apparently, one size does not fit all 6.5" speakers...
Unfortunately, I cannot give a review on the product's performance as I was unable to use it in the manner for which it was manufactured due to incompatible size issues. The speakers I have are the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers. Pairing these speakers with the NVX XBAF65 Speaker Baffle Ring Kit spawned two issues:
1) The mounting depth for the baffles is 2-5/8" (2.625 inches), whereas the mounting depth for the speakers is 2.930 inches. This minor difference was seemingly insignificant until the second issue reared its ugly head.
2) The width of the baffles is much too small for my speakers. I can't seem to find information on the exact dimensions of the baffles as I have not yet contacted NVX. But the width (diameter) of my speakers is < 5.76 inches. This is obviously too wide for the baffle because the baffle would not go on without a fight. I pulled, tugged, stretched, and strained nearly damaging the speaker. I then decided to make a few modification cuts to the baffle to accommodate the sheer width of the speaker, but the result was a shredded baffle and a traumatized speaker.
Now I'm stuck with three unusable baffles because I bought two pair!
Regarding speaker width, the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers have unremovable hardware tabs attached to them that I can only assume are there to somehow protect the speaker leads. They stick out from the speaker basket making it impossible to properly install the baffle and, in turn, causing the magnet to protrude out of the base of the baffle a lot farther than it would have if the baffle were wide enough.
Regarding the attached photos, the unmodified baffle from the first pair was used to demonstrate the issue.
Attachment: Photos
**** VENDOR RESPONSE ****
The XBAF65 are made for nearly all 6.5" speakers. The Cerwin-Vega pro midrange seem to be the culprit as their depth and basket are atypical.
We will do our best to come out with a new, larger "oversized 6.5" version and name it XBAF675. It will take us some time to tool and come out with it, but hope you enjoy the feedback.
94
found this helpful.Foam vs Rubber
The best thing about these speaker baffles are the fact that they are rubber vs the easy to find foam. They definitely add a nice level of water resistance with the rubber. Not to mention the sound quality improvement. It's seriously a night and day difference. Trust me, just buy them!
85
found this helpful.Protect Your Purchase
I like these baffle rings because it gives that added protection for my mid-bass component from any water that may slip through the window sill. It also helps with reducing any unwanted vibration noise. The egg crate foam placed behind the speaker on the inner lining of the door helps absorb waves to add more decrease in vibration.
The silicone-rubber material is going to last a long time and can be easily trimmed for a custom fit.
71
found this helpful.But them a must have
I makes sound project forward and also gives piece of mind of some possible water resistance........ A must have for better sound quality
70
found this helpful.Work good, good product
they work well. just make sure your on the spot before you stick the foam on because it is sticky.
68
found this helpful.absolutely perfect!
highly recommend for a clean speaker install. helps keep from losing mid-range sound.
67
found this helpful.Helps doors
Great baffles to help the high powered door speakers bang
66
found this helpful.The best speaker baffles!
Love these baffles! The rubber makes it easy to mount, you could trim them but it wasn't necessary in my case. Love the little foam circle that goes with it! Improves your sound quality for sure! After I installed these baffles, all of the sounds are being directed back into the cab, its definitely louder now and adds a little more midbass.
65
found this helpful.Work great.
At the very least these create a really nice seal. The ends do fold so it will clear the door panel.
64
found this helpful.great protection
Recommend!
Gives speakers protection from rain which to me is the best part. It also helps the sound quality.
57
found this helpful.This item is frequently compared to these items
• Foldable Silicone with egg crate foam
• Creates a tight seal around your speaker for optimum sound quality
• Waterproof material
• The foam baffles from the competitors will deteriorate over time, while the rubber XBAF69's will last a lifetime
(39)
$22.99
• F.A.S.T. Ring Kit for 6" and 6.5" Speakers
• Includes 3 piece foam speaker rings
• Acoustically seals speakers for better sound performance
• Absorbs rear wave, prevents front and rear wave cancellation and reduces panels vibrations
(23)
$20.99