Garage
Shop

MTX Audio reQ-5 (re-Q 5)

OEM Bass Restoration & Signal Processor (re-Q5, re-Q 5, reQ5)

MTX
Shop all MTX
highlight-star-icon

Bass Restoration & Signal Processor • Auxiliary input • Input Channels: FL, FR, RL, RR, Sub • Output Channels: FL, FR, RL, RR, Sub • Can be installed before or after stock amps

Learn more about the req5

We apologize

This item has been discontinued

Description


MTX brand icon

Authorized dealer

Authorized MTX Dealer
The re-Q5 restores bass audio signal quality from factory radio. This device will process compressed low frequencies and re-produce a signal that is far improved, resulting in great bass output at any volume level. It features 5-channel inputs and outputs, allowing an overall improved signal output from all channels in addition to bass restoration. The re-Q5 presents itself as the perfect solution for anyone who wants to enhance their system with aftermarket solutions while preserving the features of factory radios!

General Features:

  • Auxiliary input
  • Four channel 3-way summing
  • Ground Loop Isolator
  • Independent Gain controls
  • AC/DC Smart Engage to sense in any vehicle
  • Volume Sensing Bass Restoration
  • Subsonic and Low-Pass Crossovers
  • Remote output
  • Can be installed before or after stock amps
  • Authorized Internet Dealer
  • 1-year Manufacturer’s warranty

Input/Output Specifications:

  • Input Channels: FL, FR, RL, RR, Sub
  • Input Type: Differential Balanced
  • Input Range: 250mV - 30V
  • Output Channels: FL, FR, RL, RR, Sub
  • Output Type: Unbalanced RCA
  • Max Output Voltage: 2.5V RMS Full Range, 8V RMS Sub
  • Signal to Noise: >90dB (A-Weighted referenced to 1V out)
  • THD+N: <0.1% at 1V out (20Hz- 20kHz)

Miscellaneous Features:

  • Operating Voltage: 8V - 16V
  • Operating Current Draw: 150mA
  • Standby Current Draw: < 4mA
  • Recommended Fuse Value: 1A (Fast Blow)
  • Recommended Fuse Type: AGC
  • Dimensions: 7-1/8"L x 4-1/2"W x 1-1/2"H

Best selling similar products

XEQ7 small

NVX XEQ7

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 7 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

(51)

$49.99

List price $89.99

EQX7PRO small

DS18 EQX7PRO

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

$119.95

List price $143.99

HFEQ-2 small

Hifonics HFEQ-2

• 4 band-Band Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

(1)

$59.99

List price $99.99

EQL7 small

Memphis EQL7

• 7 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 8 volts max preamp outputs
• Subwoofer frequency and level control

(1)

$99.99

List price $159.95

EQ-4000BT v2 small

Earthquake Sound EQ-4000BT v2

• 4 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

$179.99

List price $199.99

EQP850 small

Cerwin-Vega EQP850

• 5-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Nickel-plated RCA level inputs

$139.99

List price $139.99

EQ-770 small

Cerwin-Vega EQ-770

• 7 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 7 volts max preamp outputs
• Subwoofer frequency and level control

(2)

$99.99

List price $115.99

EQX7 small

DS18 EQX7

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

$95.95

List price $95.95

eqx5 small

DS18 EQX5

• 5 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

(1)

$65.95

List price $65.95

Specifications & Details


Bass Reconstruction Processors Specifications
Width
4-1/2"
Height
1-1/2"
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

MTX

Model Number:

re-Q5

Weight:

1.50lbs

Internal SKU:

req5

Internal Product ID:

10834

Customer Ratings & Reviews


MTX Audio reQ-5 (re-Q 5) thumbnail image

5 star
33%
4 star
33%
3 star
22%
2 star
0%
1 star
11%



Durability
4
Value
4.2
Features
4.1
Design
4.1
Usability
3.8

Customer Reviews

Sort by:

Loading...

caused alternator whine

This allowed me to keep my factory BMW headunit and keep bass volume up but its causing unbearable alternator whine. When I disconnect the unit the whine goes away.

By eric on October 16, 2010

9 found this helpful


MTX Audio reQ-5

The reQ-5 by MTX makes adding amps to your factory radio easy. I have a 09 F-150 and an aftermarket radio and installation kit would be
out of my price range. The reQ-5 solved that problem at a fraction of the cost. Now I have super clear sound , tremendous bass and my dash is still factory. Well worth it.

By Tony Slick on November 2, 2009

7 found this helpful


Its what I needed

It allowed me to integrate aftermarket amps to my new car! No more plain factory sound!

By Anthony on April 29, 2009

7 found this helpful


Works well but a few issues

Works very well but has a couple of problems and the manual could use some attention. Installed in '07 Tundra driving Sony 4-channel and a sub amp. I'm not using the supplied aux input (yet).

One major issue is the 15-second off time on the auto-sensing trigger (to turn amps on/off). This is too short and will cause amps to turn off between songs when one song ends or starts quietly. Once level increases enough, ampt turn on but you miss part of the song. I ended up using accessory B+ and bypassing sensing circuit. This timer should be closer to a minute or two.

The supplied fuse holder is subject to poor connection (e.g. hitting road bumps) causing pops and amp shutdown - replace it with a better one.

Each channel has two inputs to the unit (8 total + a sub). With a "normal" factory HU, half of these are unused and clutter up the installation. I bridged the sub input as the manual suggested and clipped the unused wires at the connector.

There are two surface-mount red LEDs near the power-on LEDs. There is no explanation in the manual but they appear to be clipping indicators.

The "front/rear sub level" switches are poorly documented. I can't really tell what they do. Are they high-pass x-overs? Controlled by the sub x-over frequency? What frequency is the -3dB, -6dB at? Is it volume sensitive?

There's no info on MTX's web site and MTX has not responded to an email query about these issues. Since this is a new product, hopefully we'll see answers soon.

By MiCHAEL on January 23, 2008

8 found this helpful


Best oem upgrade

I bought this sound processor for my Cadillac upgrade and was very pleased with the sound upgrade .Thanks to the staff at sonic for all the support. It very good if you're adding a subwoofer

By Shawn on June 24, 2014

5 found this helpful


Great Product

Highly recommended, need some elec/mech skills to install. The manual sheet does not provide much info. Got additional info from a Google search. After 3 different configurations, finally settled on one. In a 2011 Sportage, used a 4 Chan Hifonics, 2 chan Sound Storm for 10" Sub with Polk 6.5s/tweeters in front and factory 6.5s in rear. After many days of listening and tweaking the bass and clarity are 100x better than the OEM amp/speakers. No more alternator/engine noise. The bass is not too loud or soft...just right. The remote out wire with the AC volt turn feature saved time because I did not need to locate the factory remote wire. Great product.

By King on July 8, 2011

6 found this helpful


Great product ! But...

This unit works very well and does what it is supposed to but, it amplified an alternator whine that was inaudible in the factory amplification. The sound was excellent until the vehicle was started! I attempted multiple fixes but no change other than the noise getting a bit lower in tone. I was able to return the unit and purchased a Kenwood DD screen from Sonic. Sonic provides GREAT service and has awsome pricing!

By Andrew on December 16, 2010

5 found this helpful


Warning: There's a reason this product is discontinued...

The MTX Re-Q is a terrible product. It worked fine for a year after purchase, but one summer later, the thing broke down. Every single time I turned my car off, the MTX Re-Q would send a LOUD signal to my sub for no reason. My sub would start shaking violently. The only way to stop this was to turn the Re-Q off or unplug the sub.

It isn't even good at bass restoration! After it broke, I replaced it with a simple Line-Out Converter to save money. The bass was actually more defined and clearer with the LOC!

All in all, MTX did not do a good job on this product. $20 LOC's beat this product.

By Unhappy Custy on July 23, 2012

4 found this helpful


Amazing Fix for Expedition factory Sub/plus I-pod Addition

Not one thing changed on my limited dvd,head unit,acc face plate rear.

I added the reQ-5 right off the factory sub out on rear sub unit,4wires and
just like a dream it performed perfect .

my sub was pounding the doors and windows and again the system from ford has not changed!

this is worth the price Very Happy!!!

the tech line on phone was very helpfull!!

By Rub on May 5, 2011

4 found this helpful


Related Searches


Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner's manual
  • Vehicle's insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver's side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon

Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

  • You see only parts engineered for your exact vehicle
  • You avoid incompatible radios, speakers, or wiring
  • Installation is smoother, faster, and frustration-free
  • You get the correct accessories the first time

Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.