See all parts that fit your 2013 4Runner
4-channel Load Sensing Adaptor for use with FiX-82
• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it
Install a new car stereo in select 1986-2024 vehicles from Toyota, Subaru, Scion
$6.99
List price $19.99
Single DIN or Double DIN Stereo Dash Kit for select 2010-2025 Toyota 4Runner (Charcoal High Grade)
$62.99
List price $79.99
7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto (SiriusXM Ready)
$299.95
List price $349.95
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$74.96
List price $119.99
7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto
$159.99
List price $179.99
Rockford Fosgate Punch P1 P1692
300W Peak (150W RMS) 6x9" Punch Series 2 Way Coaxial 4-ohm Speakers
$109.99
List price $109.99
360W Peak (120W RMS) 6.5" Club Series 2 Way Coaxial 3-ohms Speakers
$82.95
List price $139.95
6.8" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Wireless Apple CarPlay and Android Auto
$399.00
List price $449.00
450W Peak (170W RMS) 6x9" Club Series 2 Way Coaxial 3-ohm Speakers
$112.95
List price $179.95
• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it
The FiX-LSA-4 4-channel load sensing adapter fixes a common problem that some factory amplifiers have when working with the FiX-82. When it connects to the amp, the audio mutes. Why? Some factory amps have a load detection circuit that is looking for a low-impedance load to use the audio output. The FiX-82 has a high-impedance load at the input section. So when it connects to the factory amp, the audio stops.
The FiX-LSA-4 fixes this problem by providing a lower load impedance so the FiX-82 will work with most factory amplifiers. If you have this problem, the FiX-LSA-4 is the solution!
JL Audio Stealthbox® SB-T-4RNRG5/10TW3
Custom-Fit Loaded 10" Subwoofer Enclosure for select 2010-2024 Toyota 4Runner
$1,799.99
List price $1799.99
7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto (SiriusXM Ready)
$299.95
List price $349.95
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$74.96
List price $119.99
6.2" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay, Android Auto and Phone Mirroring
$89.99
List price $269.99
420W Peak (140W RMS) 6.5” GX Series 2 Way 2.3-ohm Component Speaker System
$149.95
List price $119.95
900W Peak (300W RMS) 6x9” CS Series 3 Way Coaxial 4-ohm Speakers with Integrated Midrange Speakers
$104.96
List price $159.99
360W Peak (120W RMS) 6.5" E-Series 2-Way Coaxial Speakers with 13mm PEI Dome Tweeters
$39.99
List price $53.99
6.8" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto (SiriusXM-Ready)
$289.99
List price $360.00
7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto
$159.99
List price $179.99
Best selling similar products
• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 20 Ohm input impedance
• 50 Watt maximum input voltage
$27.99
List price $44.00
• 5000 ohms / 0.05 watts / 5 percent load resistors
• Pack of 100
$3.99
List price $4.99
• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage
$39.00
List price $44.00
• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps
$32.99
List price $45.99
• Voltage converter stabilizer
• Input voltage: DC 9 volts - 36 volts
• Output voltage: DC 12 volts
• Maximum output current: 10 amps
$94.99
List price $119.99
• Interface For Smart Radios
• 25-ohm Load
• 4-Ch 20V Inputs
$59.99
List price $59.99
• 60-ohm Load Generators for Non-Chrysler Vehicles
• Upgrades factory speakers without distortion
• Includes (2) load generators in pack
$19.95
List price $29.95
• 20 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Works in select 2018-up Chrysler-built vehicles
• Sold as a pair
(3)
$14.99
List price $39.99
• 20 Ohm Load Resistor
• Designed to generate a load on factory wiring when removing OEM speakers
• Stabilizing signal from the OEM system
• Used in factory systems that mute or cause distortion when replacing OEM speakers
• Four Pairs, 8-Total
(3)
$59.96
List price $159.96
Manufacturer:
Model Number:
FiX-LSA-4
Weight:
0.25lbs
Internal SKU:
fixlsa4
Internal Product ID:
108429
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great value excellent product
Pros. Allows you to use the fix86 with a factory radio that requires a load for sensing speakers.Easy to use and Worked as advertised
Cons. None
25 found this helpful Helpful?
• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 2-output channels
• User adjustable 10-band graphic equalizer
• 30-second single button calibration
$449.99
List price $449.99
JBL CELEBRITY 100 (JBLCELEBRITY100)
Single DIN Digital Audio Receiver with Bluetooth
(2)
$44.95
List price $69.95
Cancel
