















600 Watt Peak (300W RMS) CX Series 4-Channel Bridgeable Class D Car Amplifier
• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit
The CX Series spans all kinds of systems, whether you're just trying to get a little more out of your factory radio or you're ready to blow the doors off with a completely aftermarket setup. Either way, the quality of your sound is at the heart of the CX Series. Sleek, simple styling and installation flexibility all round out the amplifiers' functionality.
Kicker makes your installation simple, but gives you plenty of options. Make it easy on yourself when plugging in with Kicker's KISL so you can take high-level signal from the headunit's speaker outputs straight into the amp's RCA input. Also, most models are just more than two inches thick and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.
The CXA300.4 will make sure your cabin speakers have all the power they need. This Class-D 2-ohm stable 4-channel amp is built to handle 75 watts at 2 ohms for 4 channels, 40 watts at 4 ohms on 4 channcels, or 150 watts at 4 ohms for 2 channels when bridged, and the subwoofer channel can pump out 300 watts at 2 ohms.
With a total power output at 600 watts, 3-way protection circuitry and a pulse width modulated power supply, the CXA300.4 will power your speakers for the long haul.
The CX Series has a lot of built-in technology to make sure your system just keeps going for the long haul. With litz-wound transformers to maximize power transfer while minimizing power loss, high current switching, buffered RCA outputs, these amps are built to put out lasting, quality power.
These amps also include their own crossovers and an adjustable KickEQ Bass Boost. A 3-second turn-on delay helps eliminate any additional interference that might affect your system.
But these amps also have Kicker's Failsafe Integration Technology inside. That means they can take signal from any audio source and run it straight into the amp. For you, it means no need for line-out converters, step down modules, processors or less conventional wiring to complete your system. Kicker's FIT eliminated the need for additional equipment that could introduce additional noise to your signal. It even works well with factory amplified systems from other premium brands.
For a potent, versatile power solution for your sound system, pick up as many CX Series amps as you need here at Sonic Electronix. Add one, or however many you need, to your cart today.
Belva BAK84
8 Gauge Premium (CCA) Copper Clad Aluminum Complete 4-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED
Quantity: 1
Best selling similar products
Manufacturer:
Model Number:
BAK84,46CXA3604T
Weight:
8.90lbs
Internal SKU:
ampcombo11
Internal Product ID:
151651
Really Good Amp!!
The sound of the music is so crisp and clean. It truly is one of the cleanest and clearest amps that I've heard in a long time. Thank you Kicker for another great product.
301
found this helpful.Great value
Fast shipping works great with no problems. I would order other if i ever needed it
84
found this helpful.Ok starter Kit
It's a ok kit to buy but check the RCA jacks my kit came defective one pair of RCA jacks failed. When I finished completely installing it in my truck and turned on the head unit only to fine out 3 of my 4 channel amp was working had to take out the multimeter tested the Amp then uninstall all the head unit tested RCA jacks and one pair was defective I would assume that they would work they are New. So save time and test the RCA jacks for continuity.
80
found this helpful.Great value!
Fast shipping and I recommend it for anyone. Everything u see in the picture is what u get.
81
found this helpful.Good Value Kit!
Everything I needed and good quality wire, not like some other cheap thin gauge wire you get in similarly priced kits elsewhere.
79
found this helpful.Works as said
Everything needed for a 4 ch amp install. Better quality than other cca kits I have used before. Nice thick strands.
80
found this helpful.Great deals
I recommend this to anyone. The shipping is fast and you always get a good deal.
77
found this helpful.Great value
Included in a bundle package for the price well worth it
75
found this helpful.Awesome Buy
It was everything I needed one package for a great price
74
found this helpful.Works as said
Works good and is high quality cca wiring, better than many others I have used. Fine for about a 400 watt rms 4 ch amp set up. Larger go with 4ga to be safe.
74
found this helpful.