Kicker 43DCWR102 COMPR10 Dual 10" 1600W Subwoofers+Vented Box+Amplifier+Amp Kit

Subwoofer Features:

• 10" 2 Ohm Impedance CompR Series Subwoofer
• Power Handling:
• Peak: 1600 watts
• RMS: 800 watts
• Recommended power range: 400 - 800 RMS
• Polypropylene Cone
• Ribbed Santoprene Surround
• Spiralead tinsel-lead technology
• Stamped Steel Basket
• Brass Spring-loaded Push Terminals
• Double Stacked Magnet
• Frequency Response: 25 - 500Hz
• Sensitivity: 96.5dB
• Authorized Internet Dealer
• 1-year Sonic Electronix Warranty

Enclosure Features:

• Extensive internal bracing
• MDF construction
• Custom Kicker embroidery
• Solid wood enclosure
• Front-facing port
• Box top depth: 14 1/2"
• Box bottom depth: 17 5/16"
• Box height: 14"
• Box Width: 28 7/16"

Product Details:

• CX Series Class D 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 300 watts x 1 channel
• 2 ohm: 600 watts x 1 channel
• 1 ohm: 800 watts x 1 channel
• Total RMS power output: 800 watts
• Wired bass level remote control with optional Kicker 46CXARCT
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 1 pair of pre-amp outputs
• Three-second turn-on/off delay to eliminate unwanted interference
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Small footprint for easier installation
• Accepts up to 40-volt input signal
• Vertical mounting hardware included for another unique look
• Input sensitivity:
• Low level: 125mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 25 - 200 Hz
• Total Harmonic Distortion (THD): 1%
• Signal to Noise Ratio: >95 dB
• Variable low-pass filter: 50 - 200 Hz
• Subsonic filter: 0 - 25 Hz
• Variable Bass Boost: 0 - 6 dB
• Fuse Rating: 80A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 8-1/8" L x 6-11/16" W x 2-5/16" H
• Authorized Internet Dealer
• 2 Year Manufacturer's Warranty
• MFR #: CXA800.1

Product Details:

• 4 Gauge 2-Channel Complete Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Made from 100% Copper-Clad Aluminum (CCA)
• Satin chromed Mini-ANL fuse holder offers ideal protection for high-powered systems
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• RCA Interconnect Cable
• Twisted-pair construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Gray 4 gauge power wire
2. 3 ft. Black 4 gauge ground wire
3. 17 ft. Gray 18 gauge remote lead wire
4. 20 ft. 16 gauge speaker wire
5. One 17 ft. 2-channel twisted-par construction RCA interconnect Cable
6. One Mini-ANL Fuse Holder with 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Chrome Plated ring terminals
9. Five 16 Gauge Spade terminal
10. One 18 Gauge Red butt connectors
11. Ten 4" Black zip ties