Kicker Solo-Baric L7S122 (44VL7S122) + Amplifier & Amp Kit

General Features:

• 1500W Max Single12" Vented Subwoofer Enclosure
• Power Handling:
• Peak: 1500W
• RMS: 750W
• Final Impedance: 2ohm
• Preloaded with a single12" L7S Subwoofer
• Thick black carpet with blue Kicker logo embroidered on the top
• Enclosure Dimensions: 14-3/4" TD x 17-7/8" BD x 18-3/4" W x 16" H
• Authorized Internet Dealer
• 1-year Sonic Electronix Warranty

Subwoofer Features:

• Injection-molded polypropylene cone
• Ribbed Santoprene surround
• Frequency Response: 20-500 Hz
• Sensitivity: 86.9 dB

Enclosure Features:

• Thick MDF construction
• Thick black carpet finish with embroidered Kicker logo
• Subwoofer Mounting Depth: 6-13/16"
• Subwoofer Cutout Diameter(or Dimension): 11-1/16"

Check out the 44DL7S122 product manual

Product Details:

• CX Series Class D 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 300 watts x 1 channel
• 2 ohm: 600 watts x 1 channel
• 1 ohm: 800 watts x 1 channel
• Total RMS power output: 800 watts
• Wired bass level remote control with optional Kicker 46CXARCT
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 1 pair of pre-amp outputs
• Three-second turn-on/off delay to eliminate unwanted interference
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Small footprint for easier installation
• Accepts up to 40-volt input signal
• Vertical mounting hardware included for another unique look
• Input sensitivity:
• Low level: 125mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 25 - 200 Hz
• Total Harmonic Distortion (THD): 1%
• Signal to Noise Ratio: >95 dB
• Variable low-pass filter: 50 - 200 Hz
• Subsonic filter: 0 - 25 Hz
• Variable Bass Boost: 0 - 6 dB
• Fuse Rating: 80A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 8-1/8" L x 6-11/16" W x 2-5/16" H
• Authorized Internet Dealer
• 2 Year Manufacturer's Warranty
• MFR #: CXA800.1

Product Details:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Blue and Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Gray 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
6. One MINI-ANL Fuse Holder with a 80 amp fuse
7. One Black rubber firewall grommet
8. One 4 Gauge Blue chrome plated ring terminals
9. One 4 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties