Kicker CX Series 1800W Mono Class D Mosfet Car Amplifier + Premium Amp kit

3600W Peak (1800W RMS) CX Series Monoblock Class D High-Efficiency Subwoofer Car Amplifier Package

Kicker
Shop all Kicker
highlight-star-icon

• 1800 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 3600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 13-5/8"L x 2-3/8"H

Learn more about the 43cxa18001_bak02

We apologize

This item has been discontinued

Description


Kicker

Authorized dealer

CXA1800.1


Mount a Kicker CX amp vertically to save space

The CX Series spans all kinds of systems, whether you're just trying to get a little more out of your factory radio or you're ready to blow the doors off with a completely aftermarket setup. Either way, the quality of your sound is at the heart of the CX Series. Sleek, simple styling and installation flexibility all round out the amplifiers' functionality.

Kicker makes your installation simple, but gives you plenty of options. Make it easy on yourself when plugging in with Kicker's KISL so you can take high-level signal from the headunit's speaker outputs straight into the amp's RCA input. Also, most models are just more than two inches thick and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.

CXA1800.1

The CXA1800.1 puts the thunder in your bass. This Class-D 2-ohm stable single channel amp is built to handle 1800 watts at 2 ohms for 1 channel, or 900 watts at 4 ohms.

Like most of the amps in the CX series, it's easy to control your bass output from the driver's seat. Pick up a Kicker CXARC wired remote bass level control, plug it in, and optimize your sound easily.

Under the hood

The CX Series has a lot of built-in technology to make sure your system just keeps going for the long haul. With litz-wound transformers to maximize power transfer while minimizing power loss, high current switching, buffered RCA outputs, these amps are built to put out lasting, quality power.

These amps also include their own crossovers and an adjustable KickEQ Bass Boost. A 3-second turn-on delay helps eliminate any additional interference that might affect your system.

Power a sub or a whole system with Kicker CX amps

But these amps also have Kicker's Failsafe Integration Technology inside. That means they can take signal from any audio source and run it straight into the amp. For you, it means no need for line-out converters, step down modules, processors or less conventional wiring to complete your system. Kicker's FIT eliminated the need for additional equipment that could introduce additional noise to your signal. It even works well with factory amplified systems from other premium brands.

For a potent, versatile power solution for your sound system, pick up as many CX Series amps as you need here at Sonic Electronix. Add one, or however many you need, to your cart today.

Kicker Authorized Dealer

General Features:

  • Kicker CX Series CXA1800.1
  • Class-D 2-Ohm Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 900 watts x 1 chan.
    • 2 ohms: 1800 watts x 1 chan.
  • Total power output: 3600 watts
  • Pulse Width Modulated MOSFET power supply
  • Kicker CXARC wired remote bass level control available and sold separately
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • Mono channel operation
  • Speaker-level (high-level) inputs via RCA
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Frequency Response: 25 - 200Hz
  • Signal to Noise Ration: >95dB
  • Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
  • Fixed Subsonic Filter @ 25hz, 24db/octave
  • 1/0 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 7-3/16"W x 13-5/8"L x 2-3/8"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
900 watts x 1 channel
RMS Power @ 2 ohms
1800 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
3600 watts
Total RMS Power Output
1800 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<1.00%
Speaker Level Inputs
Optional (Requires Accessory Adapter)
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
50 - 200 Hz
Subsonic Filter
25 Hz
Signal-to-Noise Ratio
>95 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Optional (Accessory required and sold separately)
CEA-2031 Compliant
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

43CXA18001 BAK02

Weight:

14.10lbs

Internal SKU:

43cxa18001_bak02

Internal Product ID:

155521

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...

Add-ons


Similar Products


Best selling similar products

NVX VAD27001

• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H

(27)

$279.99

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(33)

$164.95

JBL Stadium 600

• 380 Watts RMS x 1 @ 4 ohms
• 600 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1500 Watts
• CEA-2006 Compliant
• 0 to 9dB Bass Boost

$219.00

Kicker CXA1200.1 (46CXA12001T)

• 600 watts x 1 channel @ 4 ohms
• 1200 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier

(5)

$399.99

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(24)

$239.99

Related Searches


43CXA18001 BAK02 small

Item added to your cart.

Price: $459.95

Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back