300W Peak (100W RMS) 4x6" 2-Way N-Series Coaxial Car Speakers with 20mm Silk Dome Tweeters
• 150 watts Peak Each, 50 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
• Mounting Depth: 1.81"
• 150 watts Peak Each, 50 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
• Mounting Depth: 1.81"
Priced Per Pair
Check out the N-Series Coaxial Speakers Owner's Manual
Internal Product ID:
69256
| 5 star |
|
84% |
| 4 star |
|
16% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
good speakers
I got 2 sets for my 1988 silverado and they fit with no problem and they sound real good and they look good.
121
found this helpful.Great Speakers
I have a pair of these in my 2003 Cavalier, they bolted right into place, and they sound amazing! Running off headunit, these and my 6x9 NVX speakers in the back make a huge difference over the original speakers! Very impressed with NVX, and will continue to buy their products
119
found this helpful.Nice speakers for the price.
I bought these to replace the stock, blown dash speakers in a 94 Chevy 1500. They are a little too tall for the speaker grilles to sit flat (the tweeter sits above the speaker about 1/8"), and they slightly interfere with the passenger side defroster vent tube, but that's universal fit for you. They sound good considering they're powered by a stock 20 year old am/fm radio though. I would definitely recommend them as an upgrade from stock speakers.
113
found this helpful.Great sound!
They sound great in my 88 Pontiac Fiero Would purchase again.
113
found this helpful.Very Good Product!
These speakers fit perfectly, sound great, and is very affordable. I would highly recommend this product
110
found this helpful.Sound great
They really made a great replacement for the stock speakers that go in the dad of a 2000 chevy blazer, and they are cheap, which was a plus. They are also low watt so you can run them off just a head unit.
107
found this helpful.good for the money
They're not gonna blow you away, but they're nice replacement speakers for the money. Just don't expect them to keep the bass coming when you really crank em. Start to distort. Good sound quality at medium to low volume though. nvx (aka sonic elecronix[yes they own nvx]) makes pretty good stuff.
87
found this helpful.Nice!!
very easy to install, good bit of sound out of such a small speaker. I put these in my front doors of my 2004 Chevy cavalier. I would definitely recommend these speakers!!
78
found this helpful.Speakers sound good
They are clean and crisp they sound good for what I need them for
77
found this helpful.Perfect upgrade for 2001 Silverado
These 4×6 two way coaxial speakers are built with quality materials and sound great. They are a perfect fit in the B pillar.
32
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
$55.96
• 120 watts Peak Each, 40 watts RMS Each
• Edge-driven Silk Dome tweeters
• UV-resistant Polypropylene cone material
• Impedance: 3 ohms
• Sensitivity: 92 dB
$69.99
• 70 watts Peak Each, 35 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Injection-molded Mineral-filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$99.99
• 60 watts Peak Each, 20 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$59.99
• 90 watts Peak Each, 45 watts RMS Each
• 1" Aluminum Dome tweeters with polyurethane suspension
• Carbon Fiber & Polypropylene-injected cone material
• Impedance: 4 ohms
• Sensitivity: 85.5 dB
$129.99
• 275 watts Peak Each, 40 watts RMS Each
• 1" PEI black polypropylene balanced dome tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
$49.99
• 120 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
$53.96
Infinity Kappa 463XF (INFSPKKA463XFAM)
• 180 watts Peak Each, 60 watts RMS Each
• 1" Silk Dome tweeters with output level control
• Glass Fiber cone material with Plus One woofer cone architecture
• Impedance: 3 ohms
• Sensitivity: 93 dB
$129.95
• 100 watts Peak Each, 30 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Carbon-Polypropylene Hybrid cone material with diamond array pattern
• Impedance: 3 ohms
• Sensitivity: 86 dB
$74.00
Infinity REF467F (INFSPKRF467FUS)
• 135 watts Peak Each, 45 watts RMS Each
• 1/2" Textile Balanced Dome tweeters with output level control
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohms
• Sensitivity: 92 dB
$79.95
