(2) Kicker 44CVX102 CVX 10" 2400w Comp VX Car Subwoofers+Mono Amplifier+Amp Kit

Product Details:

• 10" Dual 2 ohms CompVX Subwoofer
• Power Handling:
• Peak: 1,200 watts
• RMS: 600 watts
• Polypropylene Cone
• Santoprene Rubber Surround
• Oversized Suspension System
• Perimeter Venting for Thermal Management
• Cast Aluminum Basket
• High Temperature Voice coil
• .64 mm Xmax
• Massive Ceramic Magnet
• Frequency Response: 24 - 500 Hz
• Resonance Frequency (Fs): 35.4 Hz
• Sensitivity: 85.7 dB
• Sealed box volume: .8 cubic feet
• Ported box volume: 1.25 cubic feet
• Top-mount depth: 5-15/16"
• Cutout diameter: 9-3/16"
• Authorized Internet Dealer
• 1-year Sonic Electronix Warranty



Priced Individually

Product Details:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Blue and Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Gray 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
6. One MINI-ANL Fuse Holder with a 80 amp fuse
7. One Black rubber firewall grommet
8. One 4 Gauge Blue chrome plated ring terminals
9. One 4 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties

General Features:

• Autotek Super Sport SS5000.1D
• Class-D 1-Ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohms: 875 watts x 1 chan.
• 2 ohms: 1750 watts x 1 chan.
• 1 ohm: 3500 watts x 1 chan.
• Total power output: 3500 watts
• CEA-2006 Compliant Amplifier
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Mono channel operation
• Speaker-level (high-level) inputs
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• Frequency Response: 20 - 250 Hz
• Signal to Noise Ratio: >98 dB
• Variable low-pass filter: 40 - 300 Hz, 12 dB/octave
• Subsonic filter: 10 - 40 Hz , 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
• Fuse: 30 A x 2
• 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 10.5"W x 10.25"L x 2"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty