2017-2022 Tesla Model 3 - Custom Subwoofer Bass Package | NVX PBK-TM3-VSW10S2

Product Details:

• PATENT PENDING Custom designed bass enclosure Compatible with select 2017-2024 Tesla Model 3
• Hand-laid fiberglass shell
• Installs quickly and easily into the storage cubby on the left side of the trunk
• 10" Dual 4 Ohm VS Series Subwoofer
• Power Handling:
• RMS: 500 Watts
• Peak: 1500 Watts
• Impedance: Dual 4 ohms
• Pressed paper cone with woven fiber top
• Woofer surround type
• Custom high roll foam surround with nylon stitching
• 2.5" high temperature aluminum voice coil
• 127oz. triple stacked ferite magnet motor structure with protective rubber boot
• Frequency response: 20-220 Hz
• Sensitivity: 87dB
• Complete amplified bass system package available here
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Q&A

Q: Can you sell the box alone or empty?

A: No and there are multiple reasons. First, there is less than 1/4-inch between the magnet and the wall of the enclosure. We specifically created the enclosure to retain a maximum amount of trunk space. Second, the VS-series subwoofer is made to work great in a small sealed enclosure. Third, and related to the first two points, it would be very difficult to support individuals' specific questions regarding mounting and space. There are not many 500 watt RMS subwoofers that would fit. The VS performance and box were specifically matched during design and engineering.

Q: The VS-series sub and price seem unreal? Why is it so inexpensive on its own?

A: Many are fooled by the relatively low price of the VS-series, but it stacks up against other subs in its class that are 3x the price. NVX has disrupted the traditional sales channels and business model and offers a direct-to-consumer experience as our primary sales vehicle. There are no middlemen, dealers, reps, or distributors involved.

NVX BE-TM3-VSW10S2 owner’s manual

Product Details:

• Marine Certified 1-Channel Class D Car Amplifier
• Peak Power Rating: 1000 Watts
• RMS Power Rating:
• 4 ohms: 180 watts x 1 channel
• 2 ohms: 320 watts x 1 channel
• 1 ohm: 500 watts x 1 channel
• Cutting edge Micro Class D technology allows amplifier to be extremely compact
• LED power (blue) and protect (red) indicators
• Conformal Coated Marine grade circuit board
• Balanced Differential Inputs, to eliminate noise picked up by signal cables
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Input sensitivity: 0.2V-5V
• Variable low-pass filter (50-250 Hz)
• Bass Boost: 0 - +18dB boost @ 45Hz
• Frequency Range : 20 - 20KHz
• Total Harmonic Distortion: <0.3%
• CEA-2006 compliant amplifier
• Dimensions: 6.8"L x 3.3"W x 1.5"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
• Designed for car audio systems up to 800 watts RMS
• Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
• Tinned conductors for corrosion resistance
• Pre-installed black nylon mesh covering protects power wire from being damaged
• Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
• Pre-terminated seamless power and ground ring terminals provide reliable performance
• Full Spec cables meet or exceed the American Wire Gauge standards
• Strand Count: 735
• CEA-2015 and BC5W2 Compliant
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
2. 3 ft. (.91 meters) Frosted Black 8 gauge ground wire with seamless crimp ring terminal
3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
4. 40 ft. (12.2 meters) Frosted Black/Blue 16 gauge speaker wire
5. One 16 ft. (5 meters) 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Nickel Plated spade terminals
9. Four 18 Gauge Spade terminal
10. Two 18 Gauge Red butt connectors
11. Four 16 Gauge quick disconnect
12. Five 16 Gauge Nickel Plated spade terminals
13. Ten 6" Black zip ties

Product Details:

• Active 2-channel line output converter and line driver
• Designed to work with factory and aftermarket audio systems
• Speaker-level inputs handle up to 30V (225 watts RMS)
• Low-level RCA inputs handle 150 mV - 2 Volts
• RCA outputs Provides up to 9.5 Volts of output
• Adjustable xBOOST corrects for bass roll-off
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
• 12 Volt turn-on output for aftermarket amplifiers
• Selectable Ground Isolation switch to eliminate ground and alternator noise
• Molex terminals for speaker signal and power
• Wired remote bass level control included
• LED Clip indicator
• Total Harmonic Distortion: 0.001%
• Signal to Noise: >105 dB
• Frequency Response: 10-25,000 Hz
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty