Belva BA120PC

General Features:

• Shrinkage ratio is 2:1
• No need to crimp wire together
• Use a heat gun to evenly shrink the connectors together
• Self-solder heat shrink butt connector
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

What's Included

• 30 x White Connectors: Diameter 1.7 mm, able cross-section 0.25-0.34 mm² (A.W.G.:26-24)
• 40 x Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18)
• 40 x Blue Connectors: Diameter 4.5 mm, Cable cross-section 1.5-2.5 mm²(A.W.G.:16-14)
• 4.10 x Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²(A.W.G.:12-10)

How To Steps

1. Strip wire insulation with 1/3" on both wire ends. Twist the strands together
2. Heat the shrink tubing first to fix wires, then apply heat while continuously rotating wire to make connector evenly heated
3. Solder will melt and flow through the stripped wires. Allow the connector to cool down before use.