Open Box, Great - JL Audio Slash 600/1v3 | 600W Class D Monoblock Amplifier

by JL Audio

About
Specs & Details
Reviews
Add-ons
Recently Viewed
Related Searches

JL Audio Slash 600/1V3 (Open Box, Complete) Image 1 — JL Audio Slash 600/1V3 (Open Box, Complete)

JL Audio Slash 600/1V3 (Open Box, Complete) Image 2 — JL Audio Slash 600/1V3 (Open Box, Complete)

JL Audio Slash 600/1V3 (Open Box, Complete) Image 3 — JL Audio Slash 600/1V3 (Open Box, Complete)

JL Audio Slash 600/1V3 (Open Box, Complete) Image 4 — JL Audio Slash 600/1V3 (Open Box, Complete)

JL Audio Slash 600/1V3 (Open Box, Complete) Image 5 — JL Audio Slash 600/1V3 (Open Box, Complete)

JL Audio Slash 600/1V3 (Open Box, Complete) Image 6 — JL Audio Slash 600/1V3 (Open Box, Complete)

JL Audio Slash 600/1V3 (Open Box, Complete) Image 7 — JL Audio Slash 600/1V3 (Open Box, Complete)

Product highlights

• Peak: 600W x 1 @ 4 ohm, 600W x 1 @ 3 ohm, 600W x 1 @ 2, 600W x 1 @ 1.5 ohm
• Total RMS Power: 600W
• R.I.P.S. Power Supply
• Parametric Bass EQ
• Fully Variable Infrasonic Filter
• Dimensions: 13.40"L x 9.25"W x 2.36"H

Learn more about the ls-6001v3-obc7

Description

Authorized dealer

Item Condition - Open Box, Great:

This product works like new, is well-cared-for and in great condition. May show limited signs of wear or use and may be missing non-essential parts, accessories or original packaging.

Item Condition - Like New:
A Open Box, Like New product is an apparently untouched product in perfect condition that includes all accessories and packaging. Original protective wrapping may be missing, but the original packaging is intact and pristine. There are absolutely no signs of wear on the item or installation. Instructions are included. Warranty details are included in the item description or comments. Item is suitable for presenting as a gift and savings should be abundant!

JL Audio Slash v3 Monoblock Class D Subwoofer Amplifier

The original Slash amplifier set new performance standards for automotive amplification and became the best-selling premium mobile amplifier in history. The new Slash v3 amplifier is built on this legendary pedigree and technology platform, enhancing it in a variety of key areas; like radically improved thermal performance, a beautiful new black look with powder-coated cast alloy heat sinks and dozens of tweaks aimed at improving performance, flexibility and reliability. JL Audio's Patented Class D output circuit utilizes a discrete control section and a unique feedback loop design that results in outstanding power regulation and a damping factor greater than 500 at 4 ohms (>250 at 2 ohms). This is vastly higher than other Class D designs and also higher than most Class A/B amplifiers. The benefit of this exclusive JL Audio technology is tight, clean bass reproduction with the efficiency advantage of Class D. Its these improvements that allow the v3 20% more power than the previous generation amplifiers.

With the proper utilization of the R.I.P.S System, the JL Audio Slash 600/1v3 offers a solid 600 watts RMS at any load between 1.5-Ohms to 4-Ohms with any voltage draw between 11V and 14.5V. To smooth out that power to your liking, the amplifier provides a very complete set of signal processing features, including a parametric bass EQ and fully variable infrasonic filter. There is no magic and no guesswork here... just pure technology, refined to the last detail.

Unparalleled Signal Processing

Highly advanced crossover filters and a full complement of signal processing features offer ultimate control and flexibility. Its this control and flexibility that sets the Slash v3 apart from heartless amplifiers that care only about putting out brute power. A variable low pass filter with selectable slope allows the user to tune the driver in perfectly to its environment and filter out any unwanted harmful frequencies. The highlight of the 600/1v3 is its Advanced Bass Control Section consisting of two primary components; a fully variable 24 dB per octave infrasonic filter and a parametric, single-band equalizer.

R.I.P.S. System

The 600/1v3 employs JL Audio’s exclusive Regulated, Intelligent Power Supply (R.I.P.S.) design. This sophisticated power supply allows the amplifier to produce its optimum power (600 watts x 1) over a wide range of speaker impedances. Unlike conventional amplifiers that require a specific impedance to produce optimum power, the R.I.P.S.-equipped 600/1v3 gives you the freedom to use a variety of subwoofer configurations without sacrificing power output or sound quality. The operation of the R.I.P.S. circuitry is entirely automatic and adjusts itself every time the amplifier is turned on according to the lowest impedance present at the speaker load.

600/1v3 Specifications:

Slash v3 Series Class D Monoblock Car Amplifier
RMS Power Rating (11V-14.5V):

4 ohm: 600 watts x 1 chan.
3 ohm: 600 watts x 1 chan.
2 ohm: 600 watts x 1 chan.
1.5 ohm: 600 watts x 1 chan.

High-Damping H-Bridge, Class D Mono Circuit
R.I.P.S. - Regulated, Intelligent Power Supply
Pulse width modulation-regulated switching power supply
LED power/thermal/low-impedance indicators
Differential-balanced input type with RCA jack inputs
Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
Single-band, fully parametric equalizer with "Q" and boost adjustment
Preamp RCA outputs w/ crossover filter options
Remote bass port input (JL Audio RBC-1 sold separately)
Input sensitivity:

Low level: 200mV-2V
High level: 800mV-8V

State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley LPF
Variable low-pass filter: 40 - 200 Hz
Fully variable, 24 dB/octave Butterworth HPF

Subsonic ("Infrasonic") Filter: 15 - 60 Hz
Advanced Bass Control:

"Q" Bandwidth Control: 0.5 - 4.3
Center Frequency: 20 - 85 Hz
EQ Boost Control: 0 - +15 dB

Selectable output frequency mode: LP / HP
Selectable output frequency slop: 12 dB / 24dB
Output filter cutoff frequency: 40 - 200 Hz
Total Harmonic Distortion: <0.05% @ 4Ω , 50 Hz
Signal to Noise Ration: >95 dB
Frequency response: 5 - 250 Hz (+0, -1 dB)
Damping Factor: >500 @ 4Ω/50 Hz, >250 @ 2Ω/50 Hz,
Inline 60A x 1 ANL or MaxiFuse Recommended
Dimensions: 13.40"L x 9.25"W x 2.36"H
4 gauge OFC power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
30 Day Sonic Electronix Warranty

Check out the JL Audio Slash 600/1v3 Owner's Manual

Product history:

	JL Audio Slash 600/1V3 (Open Box, Complete) (newest, current model)
	JL Audio Slash v2 500/1v2 (previous model, replaced by JL Audio Slash 600/1V3 (Open Box, Complete))
	JL Audio 500/1 (previous model, replaced by JL Audio Slash v2 500/1v2)

This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.

Specifications & Details

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms

600 watts x 1 channel

RMS Power @ 2 ohms

600 watts x 1 channel

RMS Power @ 1 ohm

600 watts x 1 channel at 1.5 ohms

Amplifier Specifications

Series

Slash v3 Series

Amplifier Class

Number of Channels

1 - Mono

Total RMS Power Output

600 watts

Maximum Input Gauge Size

4 AWG

Minimum Impedance Unbridged

1.5 ohm

Minimum Impedance Bridged

Not Bridgeable

THD at Rated RMS Power

0.05%

Speaker Level Inputs

Yes

Preamp Outputs

1 pair

Built-in Crossover

Low-Pass (LP)
Subsonic

Low-Pass Crossover Frequency

40 - 200 Hz

Subsonic Filter

15 - 60 Hz

Signal-to-Noise Ratio

95 dB

Bass Boost

0 - 15 dB

Remote bass/level controller

Optional (Accessory required and sold separately)

JL Audio RBC-1

Fuse Rating

60A X 1 In-Line Fuse Recommended

Strappable

Sonic Certified Amplifier

Not Tested

Amp Bluetooth Connectivity

Hi-Res Certified

What is in the box?

Paperwork

User manual

WITB: Amplifiers

Amplifier
Allen wrench

Warranty and Return Policy

Parts Warranty Duration

30 days

Labor Warranty Duration

30 days

Warranty Provider

Sonic Electronix

Customer Ratings & Reviews

JL Audio Slash 600/1V3 (Open Box, Complete) thumbnail image

Overall rating distribution

5 star		0%
4 star		0%
3 star		0%
2 star		0%
1 star		0%

Filter by Star Rating

Show only Verified Purchases

By feature average rating

Durability		0
Value		0
Features		0
Design		0
Usability		0

Customer Reviews

Sort by:

Sorry, no reviews found

Add-ons

NVX XKIT42

2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

(124)

$109.99

List price $143.99

Subscribe

Welcome to the Team!

JL Audio Slash 600/1V3 (Open Box, Complete)

We apologize

This item has been discontinued

Description

Unparalleled Signal Processing

R.I.P.S. System

600/1v3 Specifications:

Product history:

Specifications & Details

Item Details

Customer Ratings & Reviews

Customer Reviews

Related Searches

Are you sure you want to clear your garage?

This page was not designed for products.

Didn't find your car?

Account

Shopping help

Company

Everyday heroes

Brand stores

Useful links