MTX WET75.2 | Wet Series 2-Channel Bridgeable Marine Amplifier

Description

Authorized dealer

MTX WET75.2 2-Channel Amplifier

The MTX WET75.2 2-Channel Amplifier is a compact amp perfect for marine or powersport use. The small chassis will make install easier by being able to place it in a convenient area of your vehicle. If you're worried about the circuitry getting messed up over time, MTX has you covered! The electronics are designed to resist vibration and moisture. The amplifier also has a lot of awesome features to control your audio. The weather resistant design, in accordance with IP55 rating, helps protect this amplifier from the elements. With over 40 years of audio experience, MTX Audio makes sure and knows how to create quality audio in their products, and the Thunder Marine Wakeboard Tower Speakers System is no exception!

Easy Mount and Weather-resistant

With the amplifier built in accordance with the IP55 rating, it is perfect for any marine or powersport application. The surface mount technology helps this amp resist vibrations and the Conformal Coated Circuit Board helps to resist moisture. The amp's small chassis makes it possible to mount the amplifier in the perfect and most convenient spot for your vehicle.

Audio Control

The WET75.2 2-Channel amplifier has a variable crossover for more control over your audio. The connections around the RCA connectors have a rubber gasket and the controls have a plastic cover to protect from the elements.

MTX Audio WET75-2

400W Peak (200W RMS) Wet Series Class AB Bridgeable 2-Channel Marine Amplifier
Quantity: 1

General Features:

Wet Series 2-Channel Class A/B Marine Amplifier
RMS Power Rating:

4 ohm: 75 watts x 2 chan.
2 ohm: 100 watts x 2 chan.
Bridged, 4 ohm: 200 watts x 1 chan.

Max power output: 400 watts x 1chan.
Weather Resistant in Accordance with IP55 Rating
Conformal coated circuit board
Surface mount technology
Plastic splash guard over control-adjustments
Rubber Gaskets Around RCA Connectors
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
2 or Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity: 200mV-5V
Frequency Response: 15 - 25,000 Hz
Total Harmonic Distortion (THD): <0.05%
Signal to Noise Ration: >78dB
Selectable crossover modes: LPF / FR / HPF
Variable crossover filter: 50 - 750 Hz, 12 dB/octave
Fuse Rating: 30A x 1 Recommended, Not Included
8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
Dimensions: 7.90"W x 6.40"L x 2.25"H
Authorized Internet Dealer
1-year Manufacturer's Warranty

MTX WET752 owner’s manual

NVX XLCA2X PRO

2-Channel Line Out Converter Digital Bass Enhancer with xBOOST, Impedance Matching, and Remote Level Control
Quantity: 1

Product Details:

Active 2-channel line output converter and line driver
Designed to work with factory and aftermarket audio systems
Speaker-level inputs handle up to 30V (225 watts RMS)
Low-level RCA inputs handle 150 mV - 2 Volts
RCA outputs Provides up to 9.5 Volts of output
Adjustable xBOOST corrects for bass roll-off
Auto turn-on via DC offset or Audio detection
Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down
12 Volt turn-on output for aftermarket amplifiers
Selectable Ground Isolation switch to eliminate ground and alternator noise
Molex terminals for speaker signal and power
Wired remote bass level control included
LED Clip indicator
Total Harmonic Distortion: 0.001%
Signal to Noise: >105 dB
Frequency Response: 10-25,000 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty

Belva BAK82BL

8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - BLUE
Quantity: 1

Product Details:

Complete 8 Gauge 2-Channel Amplifier Installation Kit
Designed for car audio systems up to 600 watts RMS
Premium Powerflex power and ground wire provides optimal power transfer
Belva CCA wire is made from 30% copper while the competition uses only 10%
Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
Complies to American Wire Gauge standards
Also available in Red
Authorized Internet Dealer
1-year Manufacturer's Warranty

Kit includes:

17 ft. (5.2 meters) Blue 8 gauge power wire
3 ft. (.91 meters) Black 8 gauge ground wire
17 ft. (5.2 meters) Gray 18 gauge remote lead wire
17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
20 ft. (6.1 meters) 16 Gauge Speaker cable
One MINI-ANL Fuse Holder with a 60 amp fuse
One Black rubber firewall grommet
One 8 Gauge Blue chrome plated ring terminals
One 8 Gauge Black chrome plated ring terminal
Three 18 Gauge Blue Spade terminal
Two 18 Gauge Black Spade terminal
One 18 Gauge Red butt connector
Ten 4" Black zip ties

Product history:

	MTX WET75.2 2-Channel Marine Amplifier + NVX Line-Output-Converter +Free Amp Kit (newest, current model)
	MTX Audio Thunder Marine TM452 (previous model, replaced by MTX WET75.2 2-Channel Marine Amplifier + NVX Line-Output-Converter +Free Amp Kit)

Similar Products

This product is temporarily out of stock. May we recommend...

NVX Audio Upgrade Kit – NPKG212 Bass Package with 6x9" & 6.5" Speakers

• 12" Loaded Dual Subwoofer Enclosure with Amplifier
• 500 watts RMS
• Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
• Includes 6.5 and 6x9 Coaxial Speakers and Damping Kits

(313)

$468.43

List price $681.43

NVX Audio Upgrade Kit – NPKG212 Bass Package with 2 Pair 6.5" Speakers

(310)

$459.43

List price $675.43

Sundown Audio SW-NSV612D1 + NVX XCA6K

• Peak Power: 7000 watts
• Sensitivity: RMS Power: 3000 watts
• Sensitivity: Impedance: Dual 1 ohm
• Sensitivity: Polypropylene Cone
• Sensitivity: Mega Roll V2 Surround
• Sensitivity: Mount depth: 12.75"
• Sensitivity: Sensitivity: 83.02 dB

(1)

$2779.97

List price $3599.97

Rockford Fosgate R500X1D 500W RMS + 4 Gauge Amp Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

(72)

$309.99

List price $369.98

NVX NPKG212 with Free BAK82BL Amp Kit

• 12" Loaded Dual Subwoofer Enclosure with Amplifier
• 500 watts RMS
• Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(41)

$359.99

List price $469.98

NVX XCW122 + XQA25001 + XKIT02

• One 12" XCW122 XC-Series 2000W RMS Subwoofer
• 5000W Peak (2500W RMS) Class D XQA25001 Monoblock Amplifier
• XKIT02 Complete 0 AWG Amplifier Wiring Kit
• 1-year Warranty from the Original Purchase Date

(39)

$1179.97

List price $1667.97

NVX Audio Upgrade Kit – QB12SPA with 2 Pair 6.5" Speakers

• 12" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
• Includes 6.5(2) Co-axial Speaker and Damping Kits

(304)

$360.43

List price $555.42

NVX Audio Upgrade Kit – QB10SPA with 2 Pair 6.5" Speakers

• 10" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
• Includes 6.5(2) Co-axial Speaker and Damping Kits

(304)

$342.43

List price $531.42

Sundown Audio ZV6 15" D2 + NVX XCA6K

• RMS Power: 2500 watts
• Impedance: Dual 2 ohm
• Mega Roll V2 Surround
• Mount depth: 12.93"
•Sensitivity: 86.57 dB

(1)

$2899.97

List price $3599.97

Alpine Full Audio Truck Package

• 600W RMS Dual Ported 8" Loaded Enclosure
• Modular Stackable Design
• Integrated Amplifier Tray
• Class D 8-Channel-Channel Amplifier
• 6"x9" Component Speakers
• 6.5" Coaxial Speakers

(11)

$1945.99

List price $2690.00

Specifications & Details

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

75 watts x 2 channel

RMS Power @ 2 ohms

100 watts x 2 channel

Bridged RMS Power

200 watts x 1 channel

Peak Power Output

400 watts x 1 channel

Amplifier Specifications

Amplifier Class

A/B

Number of Channels

2-Channel

Total Peak Power Output

400 watts

Total RMS Power Output

200 watts

Maximum Input Gauge Size

4 AWG

Minimum Impedance Unbridged

2 ohm

Minimum Impedance Bridged

4 ohms

THD at Rated RMS Power

<0.05%

Speaker Level Inputs

Preamp Outputs

1 pair

Built-in Crossover

Low-Pass (LP)
High-Pass (HP)
Full (AP)

High-Pass Crossover Frequency

50 - 750 Hz

Low-Pass Crossover Frequency

50 - 750 Hz

Signal-to-Noise Ratio

>78 dB

Remote bass/level controller

Fuse Rating

30A x 1

Total Fuse Rating

CEA-2031 Compliant

Sonic Certified Amplifier

Not Tested

Amp Bluetooth Connectivity

Hi-Res Certified

Warranty and Return Policy

Parts Warranty Duration

1 year

Labor Warranty Duration

1 year

Warranty Provider

Manufacturer

Customer Ratings & Reviews

MTX WET75.2 2-Channel Marine Amplifier + NVX Line-Output-Converter +Free Amp Kit thumbnail image

Rate or review product

Overall rating distribution

5 star		72%
4 star		23%
3 star		2%
2 star		0%
1 star		2%

Filter by Star Rating

Show only Verified Purchases

By feature average rating

Durability		4.6
Value		4.8
Features		4.7
Design		4.8
Usability		4.8

Customer Reviews

Sort by:

Cheap kit that did it's job

The following review is for BAK82BL, which is a part of the bundle you are viewing.

Inexpensive kit that works great for the 300 watt amp I'm running.

By Anonymous on November 6, 2019

73 found this helpful Helpful?

Report abuse

Belva BAK82BL (Blue) Review

The following review is for BAK82BL, which is a part of the bundle you are viewing.

Overall this was a pretty good kit for the money. The one downside was I was missing the following and had to go out and buy these to finish my install.
One black rubber firewall grommet
One 8 Gauge Blue chrome plated ring terminals
One 8 Gauge Black chrome plated ring terminal
Three 18 Gauge Blue Spade terminal
Two 18 Gauge Black Spade terminal
One 18 Gauge Red butt connector
Ten 4" Black zip ties

By t-man on January 13, 2018

70 found this helpful Helpful?

Report abuse

Great value

The following review is for BAK82BL, which is a part of the bundle you are viewing.

Worked great for the system I installed. It came with everything to complete the project. Sonic has great service and fast shipping.

By Mike on January 22, 2017 Checkmark Icon

Verified purchase

68 found this helpful Helpful?

Report abuse

No complaints

The following review is for BAK82BL, which is a part of the bundle you are viewing.

Good amp kit for the price. Not sure if it is true 8 gauge but at this price can't complain. Plus it is everything you need

By Chad on February 26, 2017 Checkmark Icon

Verified purchase

66 found this helpful Helpful?

Report abuse

Not worth it.

The following review is for BAK82BL, which is a part of the bundle you are viewing.

This wiring kit isn't worth your money. Just buy a decent one for $50 than wasting your time with this piece of crap.

By Ray on December 19, 2015 Checkmark Icon

Verified purchase

69 found this helpful Helpful?

Report abuse

Can't do a proper upgrade without it!!

The following review is for XLCA2X, which is a part of the bundle you are viewing.

Works great with factory HU's. Stops the annoying bass rolloff when upgrading. Night and day from the other LOC's I've used before.

By Dave on August 26, 2022

64 found this helpful Helpful?

Report abuse

Great deal

The following review is for BAK82BL, which is a part of the bundle you are viewing.

Worked great for a 240 watt amp powering 4 6x9's in a custom built enclosure

By Anonymous on October 31, 2019 Checkmark Icon

Verified purchase

66 found this helpful Helpful?

Report abuse

AMP. KIT

The following review is for BAK82BL, which is a part of the bundle you are viewing.

VERY GOOD QUILTY PRODUCT AND HAD ENOUGH WIRE FOR PROJECT

By Bobby on March 23, 2017

64 found this helpful Helpful?

Report abuse

Highly recommended, amazing sound quality!

The following review is for XLCA2X, which is a part of the bundle you are viewing.

It's basically the XLCA2 on steroids. It has everything you could possibly need if you plan on adding an aftermarket subwoofer amplifier to your factory stereo. If you don't have one, GET ONE!

By Edward on August 26, 2022

61 found this helpful Helpful?

Report abuse

Nice cabling

The following review is for BAK82BL, which is a part of the bundle you are viewing.

Product performs as advertised. Came with most of necessary hardware

By Anonymous on August 18, 2018

63 found this helpful Helpful?

Report abuse

See all 47 reviews

Add-ons