


























200W Peak 6-1/2" 4-Ohm High SPL Midrange Speakers with Speaker Baffles, Sound Dampening and Heavy Duty Roller
• 6-1/2" Punch Series Speaker
• Mid-Range Driver
• 200W Max
• 100W RMS
• 4 ohm Impedance
• High Strength Paper Cone
• Treated Cloth Surround
• Oversize Magnet Structure
This highly efficient speaker uses technology developed for arena and stadium systems to fill your vehicle with warm midrange detail, regardless of volume. If your system's already strong in the highs and lows, a pair of these speakers in your ride will really fill out the sound.
Rockford Fosgate PPS4-6 Punch Pro (Sold Individually)
200W Peak (100W RMS) 6.5" Punch Pro Series 4-ohm Pro Audio Car Speaker
Quantity: 1
Priced Per Each Speaker
NVX SDBSK2 Premium Stealth Black
Premium Sound Damping (Sound Deadening) Speaker Kit, two 10" x 10" Sheets (91mil THICK)
Quantity: 1
Best selling similar products
Manufacturer:
Model Number:
PPS4-6, XBAF65, SDSK2, SDRLR1
Weight:
10.85lbs
Internal SKU:
pps46_xbaf65_sdsk2_sdrlr1
Internal Product ID:
192065
Apparently, one size does not fit all 6.5" speakers...
Unfortunately, I cannot give a review on the product's performance as I was unable to use it in the manner for which it was manufactured due to incompatible size issues. The speakers I have are the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers. Pairing these speakers with the NVX XBAF65 Speaker Baffle Ring Kit spawned two issues:
1) The mounting depth for the baffles is 2-5/8" (2.625 inches), whereas the mounting depth for the speakers is 2.930 inches. This minor difference was seemingly insignificant until the second issue reared its ugly head.
2) The width of the baffles is much too small for my speakers. I can't seem to find information on the exact dimensions of the baffles as I have not yet contacted NVX. But the width (diameter) of my speakers is < 5.76 inches. This is obviously too wide for the baffle because the baffle would not go on without a fight. I pulled, tugged, stretched, and strained nearly damaging the speaker. I then decided to make a few modification cuts to the baffle to accommodate the sheer width of the speaker, but the result was a shredded baffle and a traumatized speaker.
Now I'm stuck with three unusable baffles because I bought two pair!
Regarding speaker width, the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers have unremovable hardware tabs attached to them that I can only assume are there to somehow protect the speaker leads. They stick out from the speaker basket making it impossible to properly install the baffle and, in turn, causing the magnet to protrude out of the base of the baffle a lot farther than it would have if the baffle were wide enough.
Regarding the attached photos, the unmodified baffle from the first pair was used to demonstrate the issue.
Attachment: Photos
**** VENDOR RESPONSE ****
The XBAF65 are made for nearly all 6.5" speakers. The Cerwin-Vega pro midrange seem to be the culprit as their depth and basket are atypical.
We will do our best to come out with a new, larger "oversized 6.5" version and name it XBAF675. It will take us some time to tool and come out with it, but hope you enjoy the feedback.
94 found this helpful Helpful?
Foam vs Rubber
The best thing about these speaker baffles are the fact that they are rubber vs the easy to find foam. They definitely add a nice level of water resistance with the rubber. Not to mention the sound quality improvement. It's seriously a night and day difference. Trust me, just buy them!
85 found this helpful Helpful?
These play loud & handle power!
I purchased these for the midrange/midbass replacement in the front door of a Toyota Avalon. They bring the stage to the front & handle as much power as you can give them and still hear at the end of the day.
83 found this helpful Helpful?
Great quality & price
Clear, precise, mid range bass. Excellent value & fat shipping. Very pleased with purchase.
80 found this helpful Helpful?
Protect Your Purchase
I like these baffle rings because it gives that added protection for my mid-bass component from any water that may slip through the window sill. It also helps with reducing any unwanted vibration noise. The egg crate foam placed behind the speaker on the inner lining of the door helps absorb waves to add more decrease in vibration.
The silicone-rubber material is going to last a long time and can be easily trimmed for a custom fit.
71 found this helpful Helpful?
clear clean excellent choice
very pleased with this purchase. Perfect accompaniment to my JL sub. they are very clear distortion-free a must have.
76 found this helpful Helpful?
But them a must have
I makes sound project forward and also gives piece of mind of some possible water resistance........ A must have for better sound quality
70 found this helpful Helpful?
Solid product
Great mid driver respond well to high wattage without distortion when the amp is tuned properly. It is a beastly speaker for the price the magnet is nearly the same size as the cone! Well built product. Great option to fill in the hard to reproduce mids. Made my old mids look and sound stock.
74 found this helpful Helpful?
Satisfied!
Almost identical specs as my massive ck6 III drivers. One of the massives blew and the Rockford was a great replacement. I actually have slightly more mid bass than before. High quality construction and terminals. I would definitely recommend this driver if it fits your vehicle.
75 found this helpful Helpful?
Work good, good product
they work well. just make sure your on the spot before you stick the foam on because it is sticky.
68 found this helpful Helpful?