6x9" 2-Way V-Series Coaxial Speakers with Speaker Baffles, Sound Dampening and Heavy Duty Roller
Product highlights
• 450W Max Each / 150W RMS Each
• 25mm Silk Soft Dome Tweeter
• Mounting Depth: 3-1/8"
• Lightweight Polypropylene Woofer Cone
• 4 Ohms Impedance
• Sensitivity: 90dB
NVX likes to provide their customers a high level of consistency when it comes to their products, especially when it comes to their speakers. When designing the V-Series Speakers, NVX had to keep the standards just as high as their X & N-Series. The V-Series Speakers met that and then some! With just the power from a standard head unit, these speakers lit up the interior of a demo car with brilliant highs and rich, powerful mids which really brought the music to life. They are confident that these speakers are legitimate contenders for high-quality aftermarket speakers.
This series is one of the most versatile speakers in NVX’s catalog. Not only do the V-Series Speakers come in 4”, 5.25”, 6”, 6.5”, 6x8”, & 6x9” coaxials, but they are also available in component sets as well. There is no one else on the market today that delivers this level of sound quality at this price point for component speakers. NVX stands by that. The component sets are available in both 5.25 in. and 6.5 in. configurations. Each set of components comes with the 25mm VSPTW tweeters and two crossover networks engineered to beautifully complete the natural roll-off from the tweeters to the mid-woofers.
Just like all of NVX’s other products, the V-Series Speakers are designed with long-lasting durability and high-quality sound in mind. Each cone is designed from a lightweight polypropylene material that provides your speakers with accurate mid and low notes. The Nitrile Butadiene rubber surround supports the linear movement for optimal accuracy for your speakers. The stamped steel basket is engineered for a sturdy foundation. The Y30 Ferrite motor structure maintains exceptional control over the driver for tight, crisp reproduction. The 1" 3/16 High-temperature TSV voice coil provides superior current distribution while effectively dissipating heat.
When it comes to designing the V-Series Speakers, NVX wanted to make sure they kept the same high-quality sound from their other speakers. NVX took the same silk-dome tweeter found in their N-Series speakers and improved upon them by increasing the surface area from 20mm to 25mm. This enhancement allows these speakers to directly compete with speakers 2-3 times the price. The tweeters deliver rich, warm treble with remarkable clarity and definition. Hear what all the noise is about with!
NVX VSP69
900W Peak (300W RMS) 6x9" V-Series 2-Way Coaxial Speakers with 25mm Silk Dome Tweeters
Quantity: 1
Priced Per Pair
NVX VSP69 owner’s manual 
NVX XBAF69
2 Piece Universal 6x9” Silicone Rubber Speaker Baffles with Self Adhesive Foam Base Pad
Quantity: 1
NVX SDBSK2 Premium Stealth Black
Premium Sound Damping (Sound Deadening) Speaker Kit, two 10" x 10" Sheets (91mil THICK)
Quantity: 1
NVX SDRLR2
Universal Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1
Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Five Piece Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs
Quantity: 1
Stop wrapping screwdrivers in electrical tape and hoping for the best. If you want to make your next installation smooth, and keep your interior immaculate, pick up a set of these Belva BTK105 Panel Removal Tools.
This set of nylon plastic tools make your job easier when it comes to pulling off those interior pieces, but it also keeps you from marring your finish. When you're done with the job, no one will know you ever pulled anything off in the first place. Make your next audio improvement a cinch with the Belva BTK105 Panel Removal Tools.
Manufacturer:
Model Number:
VSP69, XBAF69, SDSK2, SDRLR1, BTK106
Weight:
15.86lbs
Internal SKU:
vsp69_xbaf69_sdsk2_sdrlr1
Internal Product ID:
192779
| 5 star |
|
90% |
| 4 star |
|
8% |
| 3 star |
|
1% |
| 2 star |
|
1% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
nvx vsp69
I would recommend these speakers for everyone so much bass and so much clear sound out of them, just wish the warehouse would, you know ship them on time, and then when they show up 5 weeks later there defective and have to wait another 4 to get them, but after that, they are fantastic and worth every penny,
97
found this helpful.Great Value
Best speakers I have bought you will not be sorry
94
found this helpful.NVX VSP69
I was a little skeptical when I ordered these speakers, as NVX was a new and emerging brand that I had never heard of. I must say that I am extremely pleased with them! I put these in the back panels of my 2000 Nissan Xterra, with NVX VSP65 speakers in the front and a Kenwood DPX500BT head unit. The whole system sounds awesome, and I can only imagine what it would sound like in a smaller car!!
93
found this helpful.Recommended
I bought these along with the NVX 6.5 components with the tweeters. These speakers are super clear and I highly recommend putting them on a amplifier, just hooking them up to a head unit does not compliment them very well... I was actually a little worried I was going to lose some sound quality on these when I compared them to my pioneer 5 way 6x9's off the head unit power alone. They shine with an amp. Currently have them hooked up to a Jensen 760.4 and my car can only hold 13.8v.
88
found this helpful.I LOVE THESE SPEAKERS
I installed these with no amp and they still sound amazing. For the price it is an unbelievable amount of performance and qaulity
86
found this helpful.Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Good for the price, could be better, does what it’s supposed to
62
found this helpful.Nifty
Nice to have these to use instead of a screwdriver! So I don't mark up my doors, dash, or paint. A lot sturdier than they look as well.
Verified purchase
57
found this helpful.Works great.
Used these on the wife's van (multiple panels) and my 68 fastback. The tools work like a charm. No scratches or issues on my panels and no broken tools is a victory all the way around.
58
found this helpful.Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Great little tool kit worked great for what I needed.
Verified purchase
55
found this helpful.Don't go without it
This really helps with overall sound quality, especially mid-bass in my experience. NVX offers excellent quality at better prices are than other popular sound deadening brands.
Verified purchase
56
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
Deaf Bonce AP-M67AC with Sound Damping
• 600W Max
• 300W RMS
• Paper cone material
• Impedance: 4 ohms
• Sensitivity: 101.70 dB
• Mounting Depth: 3"
$204.89
Deaf Bonce APM61SE with Sound Damping
• 260W Max
• 130W RMS
• Paper cone material
• Impedance: 4 ohms
• Sensitivity: 101.5 dB
• Mounting Depth: 2.83"
$114.89
Deaf Bonce AP-M81AC with Speaker Installation Kit
• 600W Max
300W RMS
• Paper cone material
• Impedance: 4 ohms
• Sensitivity: 97 dB
• Mounting Depth: 3.5"
$207.36
JBL Stadium 52F (JBLSPKSD52FAM) with Sound Damping
• 180 watts Peak Each, 60 watts RMS Each
• 3/4" Textile Edge-driven Dome tweeters, with an allowed 270° rotation
• Glass Fiber cone material with Plus One woofer cone architecture
• Impedance: 3 ohms
• Sensitivity: 93 dB
$204.94
MB QUART PS1-213 with Sound Damping
• 120 watts Peak Each, 60 watts RMS Each
• 1" Magnesium Dome tweeters
• Lightweight Aerated Pop Paper with Mica Blend cone material
• Impedance: 4 ohms
• Sensitivity: 86.5 dB
$214.98
MTX Audio THUNDER61 with Sound Damping
• 90 watts RMS Each
• 1-3/8" Silk Soft Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$214.94
Kicker CSC693 (46CSC6934) with Sound Damping
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
$144.98
MTX TERMINATOR6 with Sound Damping
• 90 watts Peak Each, 45 watts RMS Each
• 1" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 86.8 dB
$64.94
JBL GX608C (GX608CAM) with Sound Damping
• 210 watts Peak Each, 70 watts RMS Each
• Edge Driven Dome tweeters
• Polypropylene cone material
• Impedance: 2.3 ohms
• Sensitivity: 92 dB
$92.99
Kicker ST7MR8 (49ST7MR8) with Sound Damping
• 500 watts Peak Each, 250 watts RMS Each
• Pressed Pulp Fiber square cone material
• Impedance: 8 ohms
• Sensitivity: 92 dB
$214.98
