8000W RMS X-Series Full-Bridge Class D 1-Ohm Stable Monoblock Amplifier
Product highlights
• 3000 watts x 1 channel @ 4 ohm
• 5100 watts x 1 channel @ 2 ohm
• 8000 watts x 1 channel @ 1 ohm
• Total RMS Power: 8000 watts
• Frequency Response: 10 - 300 Hz
• CEA-2006 Compliant Amplifier
The NVX XAD12 is a fully bridged Class D amplifier. Consumers who seek high-power outputs in their amplifiers consider these fully bridged amplifiers to meet those needs. A full-bridge converter consists of two legs of the half-bridge converter and is preferred over the half-bridge in higher power ratings. With the same DC input voltage, the maximum output voltage of the full-bridge converter is twice that of the half-bridge converter. This Class D amp is able to boast a strong wattage output. Class D amplifiers operate as electronic switches rather than linear gain switches in other amplifiers. Furthermore, The Class D amplifier can be more efficient than its linear gain amplifier counterparts, with less power dissipated as heat in the active device. As a result, Class D amplifiers do not require large heat sinks, resulting in lighter-weight amplifiers.
The NVX XAD16 is equipped with a Metal-oxide-semiconductor field-effect transistor. The most common transistor in electronics offers a key advantage. It requires almost little to no input current to control the load current. In addition, MOSFET transistors can be scaled down to a much smaller size and produced at a higher yield making them the premier transistor of choice in almost all electronics, therefore, the XAD16 yields a high output in a more compact size. With such high power output, one would assume that a three-way protection circuitry (thermal, overload, and speaker short protection). Protect your amplifier and your speakers by offering a number of different protections including thermal, overload, and speaker short protection. These help ensure the longevity of the amplifier and your system as a whole.
The XAD16 is a fully bridged 1-ohm stable amplifier. This means that this amp will be capable of operating at a lower impedance or resistance. Since they encounter less resistance at 1-ohm these amps are able to output more power than a similar 2-ohm stable amplifier. The XAD16 also has the capability to be bridged down to 2-ohm’s. This allows the amplifier to take your sound to the next level by generating an astounding 8000W RMS power output. Because XAD16’s are 1-Ohm Stable, they are a perfect piece to add to your sound system if you are looking to get the most out of your subwoofers. The XAD16’s are guaranteed to make your sound system produce the best bass possible. This means that it is possible to wire one dual voice coil 2-ohm sub to 1-ohm or two single voice coil 2-ohm subs to 1-ohm.
NVX XAD16
8000W RMS X-Series Full-Bridge Class D 1-Ohm Stable Monoblock Amplifier
Quantity: 1
Check out the X-Series Monoblock Amplifiers Owner's Manual
NVX XKIT02
Full Spec 1/0 Gauge 100% (OFC) Oxygen Free Copper Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 4000 Watts
Quantity: 1
Best selling similar products
Kicker 46CXA3604 + 6.5" Coaxial Speakers (2-Pairs)
•65 watts x 4 channel @ 4 ohm
•90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
•Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier
• Includes Two Pairs of 6.5" Series Coaxial Speakers
(121)
$349.88
List price $449.97
Kicker 46CXA1200.1T with Amp Kit and 3 Year Warranty
• 600 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Amplifier wiring kit included
(27)
$409.92
List price $609.98
Rockford Fosgate R500X1D Amplifier + Free Belva BAK42BK 4 Gauge Amp Kit
• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
(76)
$309.99
List price $369.98
Pioneer GM-D1004 with Amplifier Wiring Kit
• RMS Power: 45W x 4 @ 4 ohm, 45W x 4 @ 2 ohm
• Total Peak Power: 400W
• CEA-2006 Compliant
• Dimensions: 7-1/8" W x 2-1/2" D x 1-1/2" H
(45)
$179.95
List price $269.99
Alpine R2-A60F with Two Pairs of 6.5" Coaxial Speakers
• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier
• Includes Two Pairs of 6.5" Series Coaxial Speakers
(13)
$1199.85
List price $1450.00
Kicker CXA660.5 (46CXA6605T) with NVX 4 Gauge Amp Kit
• 65 watts x 4 channel + 150 watts x 1 channel @ 4 ohm
• 90 watts x 4 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 660 watts
• Class A/B 2 ohm Stable 5-Channel Amplifier
• Includes Amplifier Wiring Kit
(44)
$495.45
List price $659.98
Kicker CXA360.4 (46CXA3604) with 6.5" + 6x9” Coaxial Speakers
•65 watts x 4 channel @ 4 ohm
•90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
•Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier
• Includes 6.5" + 6x9” Sports Series Coaxial Speakers
(152)
$383.88
List price $499.97
Pioneer GM-DX874 with Amplifier Wiring Kit
• 100 Watts RMS x 4 @ 4 ohm
• 150 Watts RMS x 4 @ 2 ohm
• 125 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• CTA-2006 Compliant/Preamp Outputs/LPF
• Hi-Res Audio
• Gold-plated RCA connections
• Includes Amplifier Wiring Kit
• 10-3/8"W x 2-3/8"H x 7-7/8"D
(75)
$299.99
List price $429.99
Rockford Fosgate R500X1D 500W RMS + 4 Gauge Amp Kit
• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables
(72)
$309.99
List price $369.98
Kicker CWR102 (48CWR102) with Amp and Wire Kit
• 10” CompR Series Dual 2-ohm Subwoofer
• CX-Series Class-D Monoblock Amplifier
• RCA for Amplifiers
• 8 Gauge Premium (CCA) Copper Clad Aluminum Complete 4-Channel Amplifier Wiring Kit
(42)
$334.91
List price $449.97
Manufacturer:
Model Number:
XAD16, XKIT02
Weight:
25.88lbs
Internal SKU:
xad16_xkit02
Internal Product ID:
194453
| 5 star |
|
96% |
| 4 star |
|
4% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
NVX XKIT02
This is a nice wiring kit no doubt about it. Very sturdy and flexible, easy to work with. It is definitely true 1/0 cable and seems to be pushing the Hifonics BRX2000 amp I have with more than enough power. Rca's are also pretty nice and seem to be working as stated (no feedback or humming). I also like the fact that the battery side of the power cable is pre-sleeved and has the ring terminal already installed for you with heat shrinks as well. Same on the ground cable. Over all its a nice kit, might be a little pricey compared to other kits, but you pay for quality. Well worth the money in my opinion.
105
found this helpful.Awesome Kit!
Came With Everything described in kit. If Your looking to push that power to your system, This kit will do it! Worth Every Penny!!
101
found this helpful.fuccin aye
Well worth the money, go hard or go home!!! Only mess with the best
99
found this helpful.Nothing but the best!
A little heavy but my stereo system sounds great! Would buy this again!
99
found this helpful.Fine Wire
Wires seem accurate. They transfer plenty power but I do have to upgrade battery to turn amp up more only running it at .25(1/4) and even then my lights dim front to back.
95
found this helpful.Good kit
Comes with everything except rca cables, includes some terminals and boots, look for the bundle and save a lot
90
found this helpful.premiun
Very good quality and fast shipping, i recommended buy nvx products
86
found this helpful.Awesome
I got this kit to wire a boss 2600 watt amp. The wires were huge there was no way I could run it to my amp. The quality was so great that instead of returning it I used it to upgrade my battery cables and my chassis ground. I only wish it came with more ground wire as I need a few more feet to finish my chassis ground upgrade.
Verified purchase
72
found this helpful.great kit
nice kit good quality but says in description 300a fuse but only comes with 150a fuse
----
NOTE FROM SONIC ELECTRONIX:
300A Fuse sent to customer due to typo on our behalf. We also updated the description.
74
found this helpful.Super Value
I've owned wiring kits before but this NVX kit put in great work, it has oxygen free copper that is flexable and put clean power to your amp. You will not be dissapointed this is a good value product.
64
found this helpful.
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper
1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps
(85)
$99.99
List price $114.99
