DS18 GFX-1.4K1 + Belva BAK02 1/0 Gauge Amp Kit

1400W RMS GFX Series Full-Range Class-D Monoblock Amplifier with Bass Remote

Shop all DS18
Out of stock

• 550 watts x 1 channel @ 4 ohms
• 950 watts x 1 channel @ 2 ohms
• 1400 watts x 1 channel @ 1 ohm
• Total RMS Power: 1400 watts
• Class D 1 Ohm Stable Monoblock Amplifier

Learn more about the gfx14k1_bak02
Was $249.94 Details
Thanks , You Pay:


 with warranty

Heads up

We confirm fitment and offer accessories for speakers. Please set your vehicle first if you would like to purchase more than one gfx14k1_bak02.

Set your vehicle or Return to product page
Out of stock - Order risk-free, cancel any time.
Brand new

No Credit Option

Flexible Lease Payments

Early Purchase Options

Quick Approval Decision

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7

For over 23 years, we've been your X-Factor – the team dedicated to having the biggest impact on your shopping experience!

Award-Winning Service
FREE Shipping Orders $49+
60-Day Easy Returns
Guaranteed Lowest Price
In-House Experts



Authorized dealer

DS18 GFX-1.4K1

1400W RMS GFX Series Full-Range Class-D Monoblock Amplifier with Bass Remote
Quantity: 1

Product Details:

  • GFX Series Class D 1 Ohm Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 550 watts x 1 channel
    • 2 ohms: 950 watts x 1 channel
    • 1 ohm: 1400 watts x 1 channel
  • Total RMS power output: 1400 watts
  • Compact Size and Wide Band Crossover for more applications
  • Specially designed for Mid-bass, Midrange or Driver speakers.
  • Level Knob Remote Control for dashboard included
  • Power / Protection / Clip LED indicator
  • Multiple ways of electronic protection (thermal, overload, short circuit, impedance, voltage, clipping)
  • Input sensitivity:
    • Low level: .5 - 8 volts
  • Frequency Response: 15 - 20,000 Hz
  • Total Harmonic Distortion (THD): 1%
  • Variable high-pass filter: 15 - 2,000 Hz
  • Variable low-pass filter: 50 - 20,000 Hz
  • Variable Bass Boost: 0 - 12 dB @ 35Hz - 70Hz
  • Fuse Rating: 140A
  • 2 AWG Gauge power and ground wiring is recommended for installation.
  • Dimensions: 4.52" W x 9.29" L x 2.83" H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BAK02

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - RED
Quantity: 1

Product Details:

  • 1/0 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 2000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • ANL Fuse holder with a 150 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 1/0 gauge power wire
  2. 3 ft. (.91 meters) Black 1/0 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. One ANL Fuse Holder with a 150 amp ANL fuse
  6. One Black rubber firewall grommet
  7. Three 1/0 Gauge red chrome plated ring terminals
  8. One 1/0 Gauge chrome plated ring terminal
  9. One 18 Gauge red Spade terminal
  10. One 18 Gauge red butt connector
  11. Eight 6" Black zip ties

Specifications & Details

Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
550 watts x 1 channel
RMS Power @ 2 ohms
950 watts x 1 channel
RMS Power @ 1 ohm
1400 watts x 1 channel
Amplifier Specifications
Amplifier Class
Number of Channels
1 - Mono
Total RMS Power Output
1400 watts
Maximum Input Gauge Size
Minimum Impedance Unbridged
1 Ohm
Minimum Impedance Bridged
Not Bridgeable
Frequency Response
15 - 20,000 Hz
THD at Rated RMS Power
Speaker Level Inputs
Preamp Outputs
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
15 - 2,000 Hz
Low-Pass Crossover Frequency
50 - 20,000 Hz
Bass Boost
0 - 12 dB
Remote bass/level controller
Fan Cooled
Total Fuse Rating
CEA-2031 Compliant
Amp Bluetooth Connectivity
Hi-Res Certified
Low-Level Input Sensitivity
.5 - 8 volts
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Item Details


Model Number:

GFX-1.4K1, BAK02



Internal SKU:


Internal Product ID:


Customer Ratings & Reviews

5 star
4 star
3 star
2 star
1 star


Customer Photos & Videos

Customer Reviews

Sort by:



The following review is for BAK02, which is a part of the bundle you are viewing.

This wire is very flexible and fit nicely in my 2000 nissan maxima. ring terminals were a little fussy, but that was operator error. very nice 150 amp fuse. Lots of wire crammed into it. Very inexpensive for the quality. I would recommend this to anyone looking for an upgrade.

By Blane on February 24, 2014


found this helpful.

Decent Amp Kit

The following review is for BAK02, which is a part of the bundle you are viewing.

I am a professional installer first of and my father is an electrician. Following the AWG- American Wire Gauge standards this is not 1/0 wire it's closer to 2AWG, please understand that true 1/0AWG copper wire will cost around $5-8 a foot.

That being said for the price it is an amazing kit but should be marketed as 2AWG.

When compare to Kicker and Memphis true to spec 1/0AWG wire there is a major difference in size and weigh over all. 5 feet of Memphis 1/0 Wire weigh the same as 17 feet of Belva 1/0AWG.

By josh on October 3, 2014


found this helpful.


The following review is for BAK02, which is a part of the bundle you are viewing.

It is what it says it is.. no problems with install.

By PJ on September 17, 2013


found this helpful.

Great Wire

The following review is for BAK02, which is a part of the bundle you are viewing.

It's the size it says it is, and powers my 1400 watt system with no problems. For the price and ease of install, I couldn't be happier!

By Bay on May 18, 2014


found this helpful.

a great kit for the price

The following review is for BAK02, which is a part of the bundle you are viewing.

these are great for the money and would definitely buy again

By Joseph on February 6, 2014


found this helpful.

top quality

The following review is for BAK02, which is a part of the bundle you are viewing.

I got this kit on a deal with a amplifier I purchased thought it looked good turned out to be one of the best amp kits I have ever owned would of paid full price for it

By Drew on March 28, 2014


found this helpful.

Great deal

The following review is for BAK02, which is a part of the bundle you are viewing.

I got this kit because I got a deal on it with my amp...great starting kit...didn't have any problem with it when I installed it...The ground cable was to short for me but that is due to my custom box..All in all good 1/0 Guage kit

By Robert on August 8, 2014


found this helpful.


The following review is for BAK02, which is a part of the bundle you are viewing.

I have never ran 0 gauge before and when I got it and took it out I was surprised but the big wire didn't really hurt the install it is still hidden under the carpet and it's thick and flexible so it was easy to run through the firewall. Now I'm gonna get the Belva big 3

By Brennen on June 9, 2014


found this helpful.

True 0 AWG!

The following review is for BAK02, which is a part of the bundle you are viewing.

This kit comes with everything you need for a 0 AWG amp install with RCA inputs.


I would definitely recommend purchasing this kit if you need a quality 0 AWG kit at a fair price with super fast shipping!

By Michael on October 10, 2013


found this helpful.

good product

The following review is for BAK02, which is a part of the bundle you are viewing.

Good product, they give you plenty of length. Only complaint is that the o connectors are really hard to clamp down and the rcas are kinda cheesey but work

By Zach on September 12, 2013


found this helpful.


Similar Products

This product is temporarily out of stock. May we recommend...

Alpine MRV-M500 with Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Includes Amplifier Wiring Kit



JL Audio JD1000/1 with Amplifier Wiring Kit

• NexD Switching Technology
• Differential-balanced Inputs
• 1000W Class D Mono-block
• Compact and Powerful
• Includes Amplifier Wiring Kit



NVX VAD17001 with Amplifier Wiring Kit

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Includes Amplifier Wiring Kit



NVX NBA201 Amplifier with Amplifier Wiring Kit

• 200 watts x 2 channel @ 4 ohms
• 350 watts x 2 channel @ 2 ohms
• Bridged: 1400 watts x 1 channel @ 4 ohms
• Total RMS Power: 700 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit



Kicker 46CXA4001 with Amplifier Wiring Kit

• 150 Watts RMS x 1 @ 4 ohms
• 300 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit



Related Searches

GFX-1.4K1, BAK02 small

Item added to your cart.

Price: $220.23

Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps



Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

< Back