See all parts that fit your 2015 Ram C/V
20 Ohm Load Resistors - 4 Total
Product highlights
• 20 Ohm Load Resistor
• Designed to generate a load on factory wiring when removing OEM speakers
• Stabilizing signal from the OEM system
• Used in factory systems that mute or cause distortion when replacing OEM speakers
• Two Pairs, 4-Total
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
900W Peak (300W RMS) 6x9” CS Series 3 Way Coaxial 4-ohm Speakers with Integrated Midrange Speakers
$111.96
List price $159.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
280W Peak (90W RMS) 6x9” SXE Series 2-way 4-ohm Coaxial Speakers
$56.99
List price $71.99
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial 4-ohm Speakers
$49.99
List price $59.99
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
NVX VSLR20
20-Ohm Load Resistors for 2018-up Dodge/Chrysler/Jeep/RAM/Fiat vehicles with Non-Amplified Systems
Quantity: 2
Best selling similar products
• Load Generating Device and Signal Stabilizers
• Designed for non-amplified Dodge, Chrysler, Jeep and Maserati sound systems
• Generates load and stabilize signal from a non-amplified factory system
• Operating Impedance: 20 ohms
(1)
$29.99
List price $69.00
• 60 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Works in select 2018-up Chrysler-built vehicles
• Sold as a pair
$14.99
List price $39.99
• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps
$50.99
List price $56.99
• 39 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Sold as a pair
(2)
$14.99
List price $39.99
• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage
$34.99
List price $69.00
• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it
(1)
$44.99
List price $44.99
• 5000 ohms / 0.05 watts / 5 percent load resistors
• Pack of 100
$3.99
List price $4.99
• Interface For Smart Radios
• 25-ohm Load
• 4-Ch 20V Inputs
$59.99
List price $59.99
• Voltage converter stabilizer
• Input voltage: DC 9 volts - 36 volts
• Output voltage: DC 12 volts
• Maximum output current: 10 amps
$146.99
List price $163.99
• Interface For Smart Radios
• 25-ohm Load
• 2-Ch 40V Inputs
$59.99
List price $59.99
Manufacturer:
Model Number:
(2) VSLR20
Weight:
1.62lbs
Internal SKU:
vslr20_4
Internal Product ID:
197303
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Jeep JL necessity
If you are trying to add an aftermarket amp to your Jeep JL audio system. You need to have these put in line. I went crazy trying to figure out why my amp would not power on. Put these little magic devices in-line and it worked perfect!!! Great little devices!!!
Verified purchase
30 found this helpful
No issues with factory srereo
I waited a bit before writing this review to make sure they did what they’re supposed to do. I use them on my 22 Tundra and they have been flawless. At a fraction of the cost of other one sold here the value can’t be beat. No complaints.
Verified purchase
Rockford Fosgate Prime R169X2 with Sound Damping
260W Peak (130W RMS) 6x9" Prime Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
(97)
$114.98
List price $118.73
MTX Audio XThunderLink XTL110P
270W Peak (135W RMS) 10" Universal Fit Amplified Subwoofer Enclosure System
(2)
$199.95
List price $249.95
Double DIN Stereo Dash Kit for select 2004-2008 Pacifica
(2)
$22.99
List price $42.99
600W Peak (300W RMS) 6”x9” KS Series 3-way Coaxial Car Speakers
$161.96
List price $209.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
