Includes: (2) 8" Dual 4 ohm Subwoofer, 2000W RMS Amplifier and Amp Wiring Kit
Product highlights
• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• 250 watts x 2 channel @ 4 ohms
• 550 watts x 2 channel @ 2 ohms
• 1000 watts x 2 channel @ 1 ohm
• Total RMS Power: 2000 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit
Refined and perfected to the nth degree, the NVX VCW84v3 subwoofer is a top-notch choice for those seeking the best subwooferto run a high-performance car audio system. With its powerful bass response, durable construction, and exceptional cooling and thermal management, this newest innovation in the V-series of subwoofers will provide you with years of enjoyable and reliable audio experience that rivals other subwoofers placed at 3x the price.
Solid form for solid bass
The NVX VCW84v3 subwoofer's exceptional combination of sound pressure level (SPL) and sound quality (SQ) is one of its defining characteristics. With a peak output of 1300 watts and an RMS power of 650 watts, this 8" dual 4-ohm VC-Series v3 design produces clean, distortion-free sound even when turned up to extremely loud levels.
The NVX VCW84v3's innovative carbon fiber-enhanced non-pressed paper cone expands the cone area by 31.17 in.2 and boosts the maximum excursion (Xmax) of 14mm, resulting in a more precise and potent high-bass response that will impress even the most discerning listeners. The subwoofer's custom high-roll foam surround with black nylon stitching increases its longevity, and its dual progressive roll bolt-on spiders with integrated flat braided tinsel leads provide excellent stabilization and support, letting the subwoofer deliver a powerful performance with no problems.
A chill powerhouse
The VCW84v3 is unparalleled in terms of scalability for long-running operations thanks to its improved all-around cooling system. The premium 3" 4-layer high-temperature black aluminum voice coil and optimized high-velocity pole vent provide superior cooling and thermal management, while the 6 vents around the voice coil in the die-cast aluminum vented basket further increase airflow and dissipate excess heat. The subwoofer's performance is bolstered by a 124 oz. triple stacked high energy Y35 grade ferrite magnet with a protective rubber boot, as well as by a one-piece T-Yoke with a vented magnet gap.
Carefully crafted, rigorously tested
With the VCW84v3, NVX has made it a priority to improve upon what was already a perfect combination of performance and quality in its V-series family. The latest subwoofer from the company has been developed and tested for months to ensure it is acoustically accurate for the most devoted fans who demand nothing less than the best.
NVX VCW84 Version 3 (VCW84v3)
1300 Watt Peak (650W RMS) 8” VC-Series v3 Dual 4-Ohm Car Subwoofer
Quantity: 2
NVX VCW84v3 owner’s manual
NVX XAD21
2000W RMS X-Series Full-Bridge Class D 1-Ohm Stable 2-Channel Amplifier
Quantity: 1
Check out the NVX X-Series 2-Channel Amplifier Owner's Manual
Belva BAK42
4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - RED
Quantity: 1
Manufacturer:
Model Number:
(2)VCW84v3, XAD21, BAK42
Weight:
38.60lbs
Internal SKU:
vcw84_2_xad21_bak42
Internal Product ID:
200164
| 5 star |
|
70% |
| 4 star |
|
19% |
| 3 star |
|
6% |
| 2 star |
|
5% |
| 1 star |
|
1% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Belva bak42
This item works okay, easy to install, and good for price.
185
found this helpful.impressed
I ordered this kit because it was fairly cheap but I have to say in very impressed with the quality of the wire as well as the thickness of the insulation. It was much thicker than I had anticipated and was pleasantly surprised.
185
found this helpful.good package
Great value and worth your money as far as what you would need for an amplifier/subs system setup. Quality wires.
182
found this helpful.Everything you need
This package comes with everything you need to install your amp and speakers. Great value.
175
found this helpful.Wiring kit
Very quality wires and very pliable. Will definitely buy again
177
found this helpful.best bang for your buck
hooked up to my amp with ease subs bump all day long no problems installing except finding a good ground the ground wire could be a little longer but not a major problem.
178
found this helpful.Not bad
It was pretty nice the wire was a little bigger than i thought (wire is about as fat as a sharpie marker just the wire not the insulation), the grommet that came with it was way to big for the wire so i didn't use it the fuse seems ok the connectors are good didn't have trouble crimping. I had to drill out the ring terminals a little but wasn't bad; wire insulation kind of soft and easy to puncture.
173
found this helpful.not enough
first the terminals are too small for the gauge wire for the power and ground and fuse. a lot of the things that came with the kit didn't seem to have a place with the wires e.g. butt end connectors, cable terminals, all were too small for gauge wire included. im having to run out and buy pieces from my local radioshack. the remote wire has nothing to even connect to my head unit making have to go out and buy more materials to complete my install.
177
found this helpful.Belva
Parts came fast, and seems to be a good quality for price.
172
found this helpful.Ok product
The product works. Not the best quality though. The cables are pretty lightweight. If I did it again I would spend a little more money and get a higher quality cable.
174
found this helpful.
Great amps need great wire at a great price. This amp kit has everything you need!
The reviews speak for themselves, this is awesome wire with everything you need!
NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
Features everything needed to upgrade factory power and ground wire.
Comes with everything you need to upgrade your power and ground wire.
Universal rubber roller to make it easy to install sound dampening.
Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs
Easy to locate tuning frequencies of passive radiators and ported enclosures
Best selling similar products
• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control
$199.99
MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier
• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting
$299.95
Rockford Fosgate Punch P300-10
• 10" Subwoofer 300 Watts RMS
• Rockford Fosgate Sealed Enclosure
• 300 Watt Class-D Mono Block
• Bass Remote Included
• Low And High level Inputs
$309.99
• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
$449.99
Belva BPKG212v2 Dual 12" Subwoofer and Amp Package with Box and Wiring Kit
• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit
$239.99
Rockford Fosgate Punch P300-12
• 12" Subwoofer 300 Watts RMS
• Rockford Fosgate Sealed Enclosure
• 300 Watt Class-D Mono Block
• Bass Remote Included
• Low And High level Inputs
$349.99
• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
$295.96
• 12" Amplified Loaded Subwoofer System
• 1000 watts RMS
• Built-In Class D Amplifier
• Variable bass boost
• Wired remote bass level control
$289.00
JL Audio MicroSub+ ACP110LG-TW1
• Built-in DCD Class D amplifier
• Automatic turn-on capable
• CNC-Cut High-Grade MDF
• Steel mesh grille mounted with driver
• Wrapped with Automotive-grade vehicle carpet
• Enclosure Dimensions: 6.625" D x 21.00" W x 13.50" H
$799.99
JL Audio MicroSub+ ACP108LG-W3v3
• 250W Single 8" Vented Subwoofer Enclosure with Built-In Amplifier
• 8" W3v3 Series Subwoofer(s)
• Built-in DCD Class D amplifier
• CNC-Cut High-Grade MDFConstruction w/ high-grade automotive carpet
• Enclosure Dimensions: 5.125" D x 18.500" W x 11.125" H
$599.99
