1200W 12" Power T2 Series Dual 4 ohm Subwoofer
• 2400W Peak
• 1200W RMS
• High Excursion Thermo-Rubber Surround
• Parabolic Triangular Cone Geometry Support System
• Removable And Reversible Screw Concealing Ring
• 2400W Peak
• 1200W RMS
• High Excursion Thermo-Rubber Surround
• Parabolic Triangular Cone Geometry Support System
• Removable And Reversible Screw Concealing Ring
The T2D412 Power Series 12" Subwoofer by Rockford Fosgate has a peak power rating of 2400 watts and a RMS rating of 1200 watts. With this much power you can rest assure that you will be the envy of your block, as you stroll down your street with some car rattling bass. Constructed with a hard anodized cone and dust cap for strength and durability the Power Series subs will keep going now matter how long your listening sessions last. Also equipped with Inductive Damping Heat Sink, that helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. If you are looking to take your car audio system to the next level, the T2D412 will not only overwhelm you but simply blow you away.
Aluminum Dust Cap & Cone
To increase the strength, weight, and thermal capacity of the subwoofer, a hard anodized cone and dust cap has been used. A Parabolic triangular cone support is used to reduce piston flex and cone distortion. The result is excellent heat transfer, reduced distortion, higher power handling, and a better sounding subwoofer!
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Reverse Mounting Compatible
The removable trim ring can be installed in the front or back side of the subwoofer. This enables the subwoofer to be mounted in either direction. No matter which way you install the subwoofer, it will still look great with a cosmetically finished look. Inverted mounting of the sub shows off the large magnet structure of this giant subwoofer.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Internal Product ID:
22591
I have 2 of these
I have these powered by a T2500 cp and it POUNDS! My windshield needs to be reinstalled because it blew the seal! These subs sound great and shake my neighbors house so bad he complained about stuff falling off his walls!
24
found this helpful.Amazing quality, Could not be happier!
Ordered a set of these for my '98 Cirrus. One of the main reasons I ordered these was the material and craftsmanship. My last set of subs also had an aluminum cone, and I adored them to no end! I could not bring myself to pay this kind of money for a sub with a paper cone (and yes, I know some brands make better subs with paper cones, they just aren't for me). When the subs finally came in, they were just as impressive looking as I had hoped! The build was fantastic! The spring terminals were very strong, no fear of the wires shaking loose! They are loud and proud even with only 500watts each! Can't wait to have my local shop build a custom box for em, and get a T1500 amp for these bad boys later on down the road!
24
found this helpful.not all that
I have a Rockford Fosgate 3000.1 BD amp. My Kicker l 5 blew, so I got the T2D412 thinking it would be better. I was wrong. If I could send it back, I would get the Kicker L7. The Rockford doesn't sound that good or that loud. I thought T2 would sound a lot better then they do. They also can't handle the amp that well. Sonic did a good job sending these to me, but they are not worth the money that I paid for.
24
found this helpful.Two T2D412 subs pound! Even better in a custom Rockford spec box!
I have these subs set at 3 on my gains on a T-2500bdcp and I haven't even budged it over 3 and at full volume they POUND no joke, your tonsils will be dancing and your passenger will be shocked at how loud these 12's will hit. Rockford all day, everyday!
22
found this helpful.T2
These are the best subs on the market!!!!! Don't let any other sub get your attention. If you wanna be the best, you have to have the best, and the best is the T2s. i have 2 of these in the trunk of my skyline. I have two T2500.1 running 1 for each sub, and no one has every beat me at a competition. Btw this is the second time I've had this set up. The first time I got these subs they were taken from me because I got 3 sound violations and they took my subs.
23
found this helpful.Slams
These subs will drop some lows for sure unfortunately my box and port is too small even with them inverted,it was built for my old (silver) T1D412's and isn't near enough for these subs full potential output. I'm currently looking into buying/building a proper sized box for them to get the most out of them. Powering 2 of these T2D412's with a RF T2500.1bdcp amp and it just hits crazy hard,just posted a review of that amp as well,great combination
21
found this helpful.Great buy
what can i say?really was a smart choice.i have one in a ported box tuned to 40hz and this sub gets down!as of right now im the only one where im from that has this sub. people freak out that this is a single sub cause it hits harder than two 12s. I've been through 20+ different sets of subs from kickers to jl audio to crossfire to RE Audio,the list goes on, and now im so happy i wanna sell this one and buy two brand new!
21
found this helpful.Monster in my trunk
The guys or so different from other subs. If you need something that makes your car shake then these are the beasts that you should have in the trunk. I prefer these in a bigger car cause putting these in small cars will screw your car up. By the way To make them sound better you need a bigger amp.
21
found this helpful.Crazy sub!!
I have one of these in a small chevy cobalt and, that thing pounds.. its alot louder than the 2 P3s i had before.. Im glad i put some dynamat in the trunk. If u get this sub u gonna need some dynamat..
20
found this helpful.the third review
i know about db levels and the guy that said he hits 198 or what ever bd level it is is full of crap. the world record is 182bds and that is with 8 15" subs. but these subs do hit extremely hard so i would recomend anyone to buy them
21
found this helpful.Best selling similar products
Kicker Solo-Baric L7S124 (44L7S124)
• Peak Power: 1,500 watts
• RMS Power: 750 watts
• Injection Molded Polypropylene - IMPP Cone
• Santoprene Rubber Surround
• Impedance: Dual 4 ohms
• Mount depth: 6-13/16"
• Sensitivity: 86.9 dB
(4)
$279.96
NVX VCW122 Version 3 (VCW122v3)
• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
(69)
$189.99
• Sensitivity: 85.64 dB
• Mounting depth: 5.40 "
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish
(39)
$169.99
• 800W Max / 400W RMS
• Injected Poly Light Rigid Cone
• 1" NBR Reinforced Rubber Surround
• One Piece Poly Cotton Spider
• Spade Style Speaker Terminals
• Chrome Stamped Steel Basket
(197)
$34.95
Rockford Fosgate Punch P3D2-12
• 1200W Peak
• 600W RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting
(64)
$219.99
Save up to 10 different vehicles in your garage