2 Pairs Kicker Speakers (KSC65, KSC69) + NVX VADM4 v2 w/ Free Amp Install Kit

Product Details:

• 6-1/2" KS Series 2-way Coaxial Car Speakers
• Power Handling:
• Peak: 400 watts per pair / 200 watts each
• RMS: 200 watts per pair / 100 watts each
• Polypropylene cone material
• Rubber speaker surround
• 3/4" Silk Dome tweeters with neodymium magnets
• Neodymium magnet motor structure
• Thin-mount design to fit factory grilles
• Top-mount Depth: 1-13/16"
• Cutout Dimensions: 4-13/16"
• Impedance: 4 ohm
• Frequency Response: 43 - 21000 Hz
• Sensitivity: 90 dB
• 2 speaker grilles included
• Authorized Internet Dealer
• MFR #: 51KSC6504
• 2 Year Manufacturer's Warranty



Priced Per Pair

Product Details:

• 6" x 9" KS Series 2-way Coaxial Car Speakers
• Power Handling:
• Peak: 600 watts per pair / 300 watts each
• RMS: 300 watts per pair / 150 watts each
• Polypropylene cone material
• Rubber speaker surround
• 1" Silk Dome tweeters
• Neodymium magnet motor structure
• Thin-mount design easily fits behind factory grilles
• Top-mount Depth: 3-3/16"
• Cutout Dimensions: 5-11/16 x 8-7/16 
• Impedance: 4 ohm
• Frequency Response: 30 - 21000 Hz
• Sensitivity: 92 dB
• Two speaker grilles included
• Authorized Internet Dealer
• MFR #: 51KSC6904
• 2 Year Manufacturer's Warranty



Priced Per Pair

Product Details:

• V Series Micro Class D 2 ohm Stable 4-Channel Amplifier
• RMS Power Rating:
• 4 ohm: 80 watts x 4 channel
• 2 ohm: 125 watts x 4 channel
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total power output: 500 watts
• LED Power/Protect Light
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 4-way protection circuitry (thermal, overload, speaker short protection and DC offset)
• Balanced differential inputs eliminate noise picked up by signal cables
• Selectable crossover modes: FULL / HPF / LPF
• Input sensitivity:
• Low level and High level: 0.2 - 10 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): 0.1%
• Signal to Noise Ratio: >96 dB
• Variable high-pass filter: 40 - 400 Hz
• Variable low-pass filter: 40 - 400 Hz
• 8 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 6.49" L x 3.3" W x 1.48" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: VADM4v2

Product Details:

• 8 Gauge 4-Channel X-Series Complete Amplifier Installation Kit
• Designed for car audio systems up to 800 watts RMS
• Made from 100% Oxygen-Free Copper (OFC)
• Tinned conductors for corrosion resistance
• Pre-installed black nylon mesh covering protects the power wire from damage
• Solid brass and satin chromed ANL/Mini-ANL fuse holder offers ideal protection for high-powered systems
• Pre-terminated seamless power and ground ring terminals provide reliable performance
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• CEA-2015 and BC5W2 compliant
• V-Series RCA Interconnect Cable
• Shielded noise-rejecting coaxial construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Twisted-pair construction featuring two conductors per channel
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Frosted Blue 8 gauge power wire with seamless crimp ring terminal
2. 3 ft. Frosted Black 8 gauge ground wire with seamless crimp ring terminal
3. 17 ft. Clear 18 gauge remote lead wire
4. 20 ft. Frosted Black/Blue 16 gauge speaker wire
5. One 16.4 ft. 4-channel dual twisted construction RCA interconnect Cable (NVX XIV45)
6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 8 Gauge Nickel Plated spade terminals
9. Four 18 Gauge Spade terminal
10. Two 18 Gauge Red butt connectors
11. Four 16 Gauge quick disconnect
12. Five 16 Gauge Nickel Plated spade terminals
13. Two Heat Shrink tubes with the NVX logo
14. Ten 6" Black zip ties

Product Features:

• Premium Can Insulator Sleeve Koozie with NVX Logo
• Insulating sleeve to keep drinks chilled
• Designed to hold most 12 oz. cans and bottles
• Made with durable polyurethane foam for temperature control
• Includes white NVX logo print for sleek look
• Perfect use for all occasions and events
• Dimensions: 4"W x 4"H
• Color: Black
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Priced Individually